- 您现在的位置：买卖IC网 > PDF目录297500 > THNCF256MBAI (Toshiba Corporation) The THNCFxxxMBA/BAI series CompactFlash card is a flash technology based with ATA interface flash memory card. PDF资料下载
参数资料
| 型号： | THNCF256MBAI |
| 厂商： | Toshiba Corporation |
| 英文描述： | The THNCFxxxMBA/BAI series CompactFlash card is a flash technology based with ATA interface flash memory card. |
| 中文描述： | 在THNCFxxxMBA /白系列CF卡是闪存技术，ATA接口的闪存卡的。 |
| 文件页数： | 24/48页 |
| 文件大小： | 526K |
| 代理商： | THNCF256MBAI |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
THNCFxxxMBA/BAI Series
2002-10-20
30/48
Preliminary
(11)
Read Long Sector (code 22h or 23h): This command performs similarly to the Read Sector(s) command
except that it returns 516 bytes of data instead of 512 bytes.
(12)
Read Sector(s) (code 20h or 21h): This command reads from 1 to 256 sectors as specified in the Sector
Count register. A sector count of 0 requests 256 sectors. The transfer beings specified in the Sector
Number register.
(13)
Read Verify Sector(s) (code: 40h or 41h): This command is identical to the Read Sectors command, except
that DRQ is never set and no data is transferred to the host.
(14)
Recalibrate (code: 1Xh): This command is effectively a NOP command to the Card and is provided for
compatibility purposes.
(15)
Request Sense (code: 03h): This command requests an extended error code after command ends with an
error.
(16)
Seek (code: 7Xh): This command is effectively a NOP command to the Card although it does perform a
range check.
(17)
Set Features (code: EFh): This command is used by the host to establish or select certain features.
Features
Operation
01H
Enable 8-bit data transfers.
55H
Disable Read Look Ahead.
66H
Disable Power on Reset (POR) establishment of defaults at Soft Reset.
81H
Disable 8-bit data transfers.
BBH
4 bytes of data apply on Read/Write Long commands.
CCH
Enable Power on Reset (POR) establishment of defaults at Soft Reset.
(18)
Set Multiple Mode (code: C6h): This command enables the Card to perform Read and Write Multiple
operations and establishes the block count for these commands.
(19)
Set Sleep Mode (code: E6h or 99h): This command causes the Card to set BSY, enter the Sleep mode,
clear BSY and generate an interrupt.
(20)
Stand By (code: E2h or 96h): This command causes the Card to set BSY, enter the Sleep mode (which
corresponds to the ATA “Standby” Mode), clear BSY and return the interrupt immediately.
(21)
Stand By Immediate (code: E0h or 94h): This command causes the Card to set BSY, enter the Sleep mode
(which corresponds to the ATA “Standby” Mode), clear BSY and return the interrupt immediately.
(22)
Translate Sector (code: 87h): This command allows the host a method of determining the exact number of
times a use sector has been erased and programmed.
(23)
Wear Level (code: F5h): This command effectively a NOP command and only implemented for backward
compatibility. The Sector Count Register will always be returned with a 00h indicating Wear Level is
not needed.
(24)
Write Buffer (code: E8h): This command enables the host to overwrite contents of the Card’s sector buffer
with any data pattern desired.
(25)
Write Long Sector (code: 32h or 33h): This command is provided for compatibility purposes and is
similar to the Write Sector(s) command except that it writes 516 bytes instead of 512 bytes.
(26)
Write Multiple (code: C5h): This command is similar to the Write Sectors command. Interrupts are not
presented on each sector, but on the transfer of a block which contains the number of sectors defined by
Set Multiple command.
(27)
Write Multiple without Erase (code: CDh): This command is similar to the Write Multiple command with
the exception that an implied erase before write operation is not performed.
(28)
Write Sector(s): (code: 30h or 31h): This command writes from 1 to 256 sectors as specified in the Sector
Count register. A sector count of zero requests 256 sectors. The transfer begins at the sector specified
in the Sector Number register.
(29)
Write Sector(s) without Erase (code: 38h): This command is similar to the Write Sector(s) command with
the exception that an implied erase before write operation is not performed.
(30)
Write Verify (code: 3Ch): This command is similar to the Write Sector(s) command, except each sector is
verified immediately after being written.
相关PDF资料 |
PDF描述 |
|---|---|
| THSC-1 | INTERCONNECTION DEVICE |
| TI380C25PGE | 1 CHANNEL(S), 16M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144 |
| TIA-1000-1R8-2 | 0.5 MHz - 1000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| TIM0910-8 | MICROWAVE POWER GaAS FET |
| TIP112F | EPITAXIAL PLANAR NPN TRANSISTOR (MONOLITHIC CONSTRUCTION WITH BUILT IN BASE-EMITTER SHUNT RESISTORS INDUSTRIAL USE.) |
相关代理商/技术参数 |
参数描述 |
|---|---|
| THNCF256MDG | 功能描述:MEMORY CARD COMPACT FLASH 256MB RoHS:是 类别:存储卡，模块 >> 存储器，PC 卡 系列:- 标准包装:30 系列:- 存储容量:8GB 存储器类型:存储卡 - Extreme III SD? |
| THNCF256MDGI | 功能描述:MEMORY CARD COMPACT FLASH 256MB RoHS:是 类别:存储卡，模块 >> 存储器，PC 卡 系列:- 标准包装:30 系列:- 存储容量:8GB 存储器类型:存储卡 - Extreme III SD? |
| THNCF256MMA | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:The THNCFxxxxMA series CompactFlash card is a flash technology based with ATA interface flash memory card |
| THNCF256MPG | 制造商:Toshiba America Electronic Components 功能描述:256MB Standard Compact Flash Card - Lead Fee |
| THNCF320MAA | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:CompactFlash Card |
发布紧急采购，3分钟左右您将得到回复。