- 您现在的位置：买卖IC网 > PDF目录69493 > TLC320AD50IDW (TEXAS INSTRUMENTS INC) SPECIALTY ANALOG CIRCUIT, PDSO28 PDF资料下载
参数资料
| 型号： | TLC320AD50IDW |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 模拟信号调理 |
| 英文描述： | SPECIALTY ANALOG CIRCUIT, PDSO28 |
| 封装： | PLASTIC, SO-28 |
| 文件页数： | 11/56页 |
| 文件大小： | 555K |
| 代理商： | TLC320AD50IDW |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页
2–4
does not need to be addressed during the secondary communications interval. The no-op command (DS15–DS8 all
set to 0) addresses the pseudoregister (register 0), and no register programming takes place during the
communications.
In addition, each register can be read back through DOUT during secondary communications by setting the read bit
(DS13) to 1. When the register is in the read mode, no data can be written to the register during this cycle. DS13 must
be cleared to write to the register.
For example, if the contents of control register 1 is desired to be read out from DOUT, the following procedure must
be performed through DIN:
1.
Request secondary communication by setting either D0 = 1 (software request) or FC = high (hardware
request) during the primary communication interval.
2.
At the secondary communication interval (FS), send data in the following format in through DIN:
read
control register 1
0
1
0
1
x
DS15
DS0
3.
Then the following data will be read from DOUT, the last 8 bits of DOUT will contain the register 1 data.
read
control register 1
data
M/S
0
1
0
1
d
DS15
DS0
Figure 2–5 is a timing diagram of this procedure.
FS
DIN
P
DOUT
Low 8 Bits (DS0–DS7) are the
Content of Register 1
Register 1 Read
S
Figure 2–5. Register 1 Read Operation Timing Diagram
If control register 1 needs to be programmed, the following procedure must be performed through DIN:
1.
Request secondary communication by setting either D0 = 1 (software request) or FC = high (hardware
request) during the primary communication interval.
2.
At the secondary communication interval (FS), send data in the following format in through DIN:
write
control register 1
data
0
1
d
DS15
DS0
3.
Then the following data is generated from DOUT:
write
control register 1
M/S
0
1
0
DS15
DS0
相关PDF资料 |
PDF描述 |
|---|---|
| TLC320AD50CPTR | SPECIALTY ANALOG CIRCUIT, PQFP48 |
| TLC320AD50IPTR | SPECIALTY ANALOG CIRCUIT, PQFP48 |
| TLC320AD50IPT | SPECIALTY ANALOG CIRCUIT, PQFP48 |
| TLC555QDRQ1 | PULSE; RECTANGULAR, 1.2 MHz, TIMER, PDSO8 |
| TLC7701MPWREPG4 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TLC320AD50IPT | 制造商:TI 制造商全称:Texas Instruments 功能描述:SIGMA-DELTA ANALOG INTERFACE CIRCUITS WITH MASTER-SLAVE FUNCTION |
| TLC320AD52CDW | 制造商:TI 制造商全称:Texas Instruments 功能描述:SIGMA-DELTA ANALOG INTERFACE CIRCUITS WITH MASTER-SLAVE FUNCTION |
| TLC320AD52CPT | 功能描述:IC ANALOG INTERFACE W/MS 48-LQFP RoHS:否 类别:集成电路 (IC) >> 接口 - 编解码器 系列:- 标准包装:2,500 系列:- 类型:PCM 数据接口:PCM 音频接口 分辨率（位）:15 b ADC / DAC 数量:1 / 1 三角积分调变:是 S/N 比，标准 ADC / DAC (db):- 动态范围，标准 ADC / DAC (db):- 电压 - 电源，模拟:2.7 V ~ 3.3 V 电压 - 电源，数字:2.7 V ~ 3.3 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:80-VFBGA 供应商设备封装:80-BGA MICROSTAR JUNIOR（5x5） 包装:带卷 (TR) 其它名称:296-21257-2 |
| TLC320AD535 | 制造商:TI 制造商全称:Texas Instruments 功能描述:DUAL CHANNEL VOICE/DATA CODEC |
| TLC320AD535C | 制造商:TI 制造商全称:Texas Instruments 功能描述:DUAL CHANNEL VOICE/DATA CODEC |
发布紧急采购，3分钟左右您将得到回复。