参数资料
型号: TLC320AD50IDW
厂商: TEXAS INSTRUMENTS INC
元件分类: 模拟信号调理
英文描述: SPECIALTY ANALOG CIRCUIT, PDSO28
封装: PLASTIC, SO-28
文件页数: 19/56页
文件大小: 555K
代理商: TLC320AD50IDW
2–11
2.8
Frame-Sync Function for TLC320AD52C
The frame-sync function for TLC320AD52C is very similar to that of the TLC320AD50C except the following:
1.
TLC320AD52C can support only one slave.
2.
The FSD terminal function can be disabled for TLC320AD52C by programming bit D2 in control 2 register.
3.
The FSD value loaded into control 3 register must be multiplied by 2 to obtain the actual number of SCLKs
for the delay.
For example, if FSD register (control register 3) is programmed with 49H, it means that the TLC320AD52C has one
slave and the FSD terminal has 18 SCLKs delay after master primary FS output. See Figure 2–14.
FS
FSD
256 SCLKs
MP
SP
MS
SS
MP
128 SCLKs
Delay is
≥18
SCLKs
(See Note A)
NOTE A: Minimum SCLK delay number in FSD register is 9. This means that a delay of at least 18 SCLKs is required for proper operation of the
TLC320AD52C.
Figure 2–14. Master Device FS and FSD Output After Control 3 Register
Is Programmed With 49H
2.9
Multiplexed Analog Input and Output
The two differential analog inputs (INP and INM or AUXP and AUXM) are multiplexed into the sigma-delta modulator.
The performance of the AUX channel is similar to the normal input channel. A single-pole antialias filter must be
connected to INP and INM (also AUXP and AUXM, if used). If an RC is used for the single-pole filter (Figure 2–15)
the value of R should not be greater that 1 k
. The gain of the input amplifiers is set through the control register 4.
C
IN +
R
INP
C
IN –
R
INM
NOTES: A. The bandwidth of this RC antialias is determined by: (f0 = 1/(2π RC))
B. AUXP and AUXM need to be connected to AVSS if not used.
C. Bandwidth of the antialias filter can be 4
× fs.
D. The input signal must have AVDD/2 dc or it must be ac-coupled.
Figure 2–15. RC Antialias Filter
To produce the best possible common-mode rejection of unwanted signal performance, the analog signal is
processed differentially until it is converted to digital data. The signal applied to the terminals INM and INP should
be differential to preserve the device specifications. As much as 6 dB of signal level will be lost if the single-ended
input is used directly. The signal source driving the analog inputs (INP and INM or AUXP and AUXM) should have
a low source impedance for best low-noise performance and accuracy.
To obtain maximum dynamic range, the signal should be ac-coupled to the input terminal. The analog input signal
is self-biased to the midsupply voltage if the monitor-amplifier input source is selected as the same source for the
相关PDF资料
PDF描述
TLC320AD50CPTR SPECIALTY ANALOG CIRCUIT, PQFP48
TLC320AD50IPTR SPECIALTY ANALOG CIRCUIT, PQFP48
TLC320AD50IPT SPECIALTY ANALOG CIRCUIT, PQFP48
TLC555QDRQ1 PULSE; RECTANGULAR, 1.2 MHz, TIMER, PDSO8
TLC7701MPWREPG4 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
相关代理商/技术参数
参数描述
TLC320AD50IPT 制造商:TI 制造商全称:Texas Instruments 功能描述:SIGMA-DELTA ANALOG INTERFACE CIRCUITS WITH MASTER-SLAVE FUNCTION
TLC320AD52CDW 制造商:TI 制造商全称:Texas Instruments 功能描述:SIGMA-DELTA ANALOG INTERFACE CIRCUITS WITH MASTER-SLAVE FUNCTION
TLC320AD52CPT 功能描述:IC ANALOG INTERFACE W/MS 48-LQFP RoHS:否 类别:集成电路 (IC) >> 接口 - 编解码器 系列:- 标准包装:2,500 系列:- 类型:PCM 数据接口:PCM 音频接口 分辨率(位):15 b ADC / DAC 数量:1 / 1 三角积分调变:是 S/N 比,标准 ADC / DAC (db):- 动态范围,标准 ADC / DAC (db):- 电压 - 电源,模拟:2.7 V ~ 3.3 V 电压 - 电源,数字:2.7 V ~ 3.3 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:80-VFBGA 供应商设备封装:80-BGA MICROSTAR JUNIOR(5x5) 包装:带卷 (TR) 其它名称:296-21257-2
TLC320AD535 制造商:TI 制造商全称:Texas Instruments 功能描述:DUAL CHANNEL VOICE/DATA CODEC
TLC320AD535C 制造商:TI 制造商全称:Texas Instruments 功能描述:DUAL CHANNEL VOICE/DATA CODEC