参数资料
型号: TLE8242
厂商: INFINEON TECHNOLOGIES AG
元件分类: 模拟信号调理
英文描述: SPECIALTY ANALOG CIRCUIT, PQFP64
封装: GREEN, PLASTIC, LQFP-64
文件页数: 27/77页
文件大小: 1580K
代理商: TLE8242
Data Sheet
33
Rev. 1.0, 2009-02-25
TLE8242
Functional Description and Electrical Characteristics
5.8.1
Zone 1
When the OUTx pin transitions from low-to-high, zone 1 of the logic is entered. The TLE8242 compares the
difference between successive A/D samples and calculates the ADDIFF value. This value is compared with
Threshold1 as follows:
– ADDIFF = A/Dm+1 - A/Dm
– IF (ADDIFF > Threshold1) THEN count = count +1
When ADDIFF is greater than Threshold 1 for Count1 out of Count1 + 1 successive comparisons, zone 1 is passed
and zone 2 is entered. Note that if one of the tests fails, the actual test performed on the next sample after the
single failure is
– ADDIFF = A/Dm+1 - A/Dm-1
– IF (ADDIFF > 2 * Threshold1) THEN count = count +1
This has the effect of filtering out a single noise spike in the A/D measurement.
5.8.2
Zone 2
In zone 2, the TLE8242 compares the difference between successive A/D samples and calculates the ADDIFF
value. This value is compared with Threshold2 as follows:
– ADDIFF = A/Dm+1 - A/Dm
– IF (ADDIFF <Threshold2) THEN count = count +1
When ADDIFF is less than Threshold2 for Count2 out of Count2 + 1 successive comparisons, zone 2 is passed
and zone 3 is entered. When the thresold2 is set to 0, a negative difference in the A/D samples (negative slope)
must be detected. Note that if one of the tests fails, the actual test performed on the next sample after the single
failure is
– ADDIFF = A/Dm+1 - A/Dm-1
– IF (ADDIFF <2 * Threshold2) THEN count = count +1
This has the effect of filtering out a single noise spike in the A/D measurement.
5.8.3
Zone 3
In zone 3, the TLE8242 sample rate for the CPD function can be altered from the sample rate used for zone 1 and
zone 2. As in zone 1 and zone 2, the TLE8242 compares the difference between two A/D samples and calculates
ADDIFF. The sample rate can be altered in zone 3 such that ADDIFF is calculated as shown in Table 5.This allows
for more noise immunity and also allows the programming of a lower effective slope to be detected. When ADDIFF
is greater than Threshold3 for Count3 output of Count3 + 1 successive comparisons, the test passes and zone 3
is completed. When zone 3 passes, the current profile is passed.
Note that if one of the tests fails, the actual test performed on the next sample after the single failure is
– ADDIFF = A/Dm - A/Dm-2*a (a=1, 2, 3, 4 depending on the settings in Table 6)
– IF (ADDIFF > 2 * Threshold3) THEN count = count +1
This has the effect of filtering out a single noise spike in the A/D measurement.
Table 6
Zone 3 Sample Rate Selection
SPI Bit Values
Samples Used
ADDIFF
00
successive A/D samples
A/Dm - A/Dm-1
01
every 2nd A/D sample
A/Dm - A/Dm-2
10
every 3rd A/D sample
A/Dm - A/Dm-3
11
every 4th A/D sample
A/Dm - A/Dm-4
相关PDF资料
PDF描述
TLE8386EL 0.09 A SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO14
TLI4946-2L MAGNETIC SENSOR, PSIP3
TLI4946K MAGNETIC SENSOR, PDSO3
TLV431AIDBVR 1-OUTPUT THREE TERM VOLTAGE REFERENCE, 1.24 V, PDSO5
TLV431ACDBVT 1-OUTPUT THREE TERM VOLTAGE REFERENCE, 1.24 V, PDSO5
相关代理商/技术参数
参数描述
TLE8242-2 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:8 Channel Fixed Frequency Constant Current Control With Current Profile Detection
TLE82452SAALLA1 制造商:Infineon Technologies AG 功能描述:TRANSMISSION_IC - Rail/Tube
TLE82452SAAUMA1 制造商:Infineon Technologies AG 功能描述:TRANSMISSION_IC - Tape and Reel
TLE8250G 功能描述:CAN 接口集成电路 High Speed CAN Transceiver RoHS:否 制造商:Texas Instruments 类型:Transceivers 工作电源电压:5 V 电源电流: 工作温度范围:- 40 C to + 85 C 封装 / 箱体:SOIC-8 封装:Tube
TLE8250GVIO 功能描述:CAN 接口集成电路 High Speed CAN Transceiver RoHS:否 制造商:Texas Instruments 类型:Transceivers 工作电源电压:5 V 电源电流: 工作温度范围:- 40 C to + 85 C 封装 / 箱体:SOIC-8 封装:Tube