- 您现在的位置：买卖IC网 > PDF目录98260 > TLV5624IDR (TEXAS INSTRUMENTS INC) SERIAL INPUT LOADING, 3.5 us SETTLING TIME, 8-BIT DAC, PDSO8 PDF资料下载
参数资料
| 型号： | TLV5624IDR |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | DAC |
| 英文描述： | SERIAL INPUT LOADING, 3.5 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| 封装： | GREEN, PLASTIC, MS-012AA, SOIC-8 |
| 文件页数： | 6/22页 |
| 文件大小： | 571K |
| 代理商： | TLV5624IDR |
TLV5624
2.7V TO 5.5V LOW POWER 8BIT DIGITALTOANALOG
CONVERTER WITH INTERNAL REFERENCE AND POWER DOWN
SLAS235B JULY 1999 REVISED APRIL 2004
14
WWW.TI.COM
APPLICATION INFORMATION
power-supply bypassing and ground management
Printed-circuit boards that use separate analog and digital ground planes offer the best system performance.
Wire-wrap boards do not perform well and should not be used. The two ground planes should be connected
together at the low-impedance power-supply source. The best ground connection may be achieved by
connecting the DAC AGND terminal to the system analog ground plane, making sure that analog ground
currents are well managed and there are negligible voltage drops across the ground plane.
A 0.1-
F ceramic-capacitor bypass should be connected between VDDand AGND and mounted with short leads
as close as possible to the device. Use of ferrite beads may further isolate the system analog supply from the
digital power supply.
Figure 16 shows the ground plane layout and bypassing technique.
0.1
F
Analog Ground Plane
1
2
3
4
8
7
6
5
Figure 16. Power-Supply Bypassing
definitions of specifications and terminology
integral nonlinearity (INL)
The relative accuracy or integral nonlinearity (INL), sometimes referred to as linearity error, is the maximum
deviation of the output from the line between zero and full scale excluding the effects of zero code and full-scale
errors.
differential nonlinearity (DNL)
The differential nonlinearity (DNL), sometimes referred to as differential error, is the difference between the
measured and ideal 1 LSB amplitude change of any two adjacent codes. Monotonic means the output voltage
changes in the same direction (or remains constant) as a change in the digital input code.
zero-scale error (EZS)
Zero-scale error is defined as the deviation of the output from 0 V at a digital input value of 0.
gain error (EG)
Gain error is the error in slope of the DAC transfer function.
total harmonic distortion (THD)
THD is the ratio of the rms value of the first six harmonic components to the value of the fundamental signal.
The value for THD is expressed in decibels.
signal-to-noise ratio + distortion (S/N+D)
S/N+D is the ratio of the rms value of the output signal to the rms sum of all other spectral components below
the Nyquist frequency, including harmonics but excluding dc. The value for S/N+D is expressed in decibels.
spurious free dynamic range (SFDR)
Spurious free dynamic range is the difference between the rms value of the output signal and the rms value of
the largest spurious signal within a specified bandwidth. The value for SFDR is expressed in decibels.
相关PDF资料 |
PDF描述 |
|---|---|
| TLV5624IDGKG4 | SERIAL INPUT LOADING, 3.5 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| TLV5624CDG4 | SERIAL INPUT LOADING, 3.5 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| TLV5624CDGKR | SERIAL INPUT LOADING, 3.5 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| TLV5624CDGKRG4 | SERIAL INPUT LOADING, 3.5 us SETTLING TIME, 8-BIT DAC, PDSO8 |
| TLV5624IDRG4 | SERIAL INPUT LOADING, 3.5 us SETTLING TIME, 8-BIT DAC, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TLV5624IDRG4 | 功能描述:数模转换器- DAC 8-Bit 1.0-3.5us DAC Serial Out RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| TLV5625 | 制造商:TI 制造商全称:Texas Instruments 功能描述:2.7-V TO 5.5-V LOW-POWER DUAL 8-BIT DIGITAL-TO-ANALOG CONVERTER WITH POWER DOWN |
| TLV5625CD | 功能描述:数模转换器- DAC Dual 8bit DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| TLV5625CDG4 | 功能描述:数模转换器- DAC 8-Bit 2.5-12 us Dual DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| TLV5625CDR | 功能描述:数模转换器- DAC 8-Bit 2.5-12 us Dual DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。