V
CC
V
CC
EN
ACK
ID
1
5
6
10
V
BUS
V
BUS
GND
D+
D-
SLVSAU0A
– MAY 2011 – REVISED JUNE 2011
COMPLETE PROTECTION SOLUTION FOR USB CHARGER PORT INCLUDING ESD
PROTECTION FOR ALL LINES AND OVER-VOLTAGE PROTECTION ON VBUS
1
FEATURES
APPLICATIONS
Input Voltage Protection at VBUS up to 28V
Cell Phones
Low Ron nFET Switch
eBook
Supports
>2A charging current
Portable Media Players
Over Voltage and Under Voltage Lock Out
Digital Camera
Features
DSQ PACKAGE
Low Capacitance TVS ESD Clamp for USB2.0
(TOP SIDE/SEE-THROUGH VIEW)
High speed Data Rate
Internal 16ms Startup Delay
Integrated Input Enable and Status Output
Signal
Thermal Shutdown Feature
ESD Performance D+/D
–/ID/VBUS Pins
– ±15-kV Contact Discharge (IEC 61000-4-2)
– ±15-kV Air Gap Discharge (IEC 61000-4-2)
Space Saving QFN Package (2mm
×2mm)
DESCRIPTION
The TPD4S014 is a single-chip solution for USB charger port protection. This device offers low capacitance TVS
type ESD clamps for the D+, D- and standard Capacitance for the ID pin. On the VBUS pin, this device can
handle over-voltage protection up to 28V. The over voltage lock-out feature ensures that if there is a fault
condition at the VBUS line, the TPD4S014 is able to isolate the VBUS line and protects the internal circuitry from
damage. Similarly, the under voltage lock out feature ensures that there is no power drain from the internal VCC
plane to external VBUS side in case there is short to GND. There is a 16ms turn-on delay after VBUS crosses
the under voltage lockout threshold, in order to let the voltage stabilize before closing the switch. This function
acts as a deglitch and prevents unnecessary switching if there is any ringing on the line during connection.
ORDERING INFORMATION
TA
PACKAGE(1)(2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
–40°C to 85°C
QFN
– DSQ (0.4-mm pitch)
Tape and reel
TPD4S014DSQR
ZTE
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright
2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.