参数资料
型号: TPS2552DRVT
厂商: TEXAS INSTRUMENTS INC
元件分类: 电源管理
英文描述: 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
封装: GREEN, PLASTIC, SON-6
文件页数: 10/32页
文件大小: 1025K
代理商: TPS2552DRVT
SLVS841D
– NOVEMBER 2008 – REVISED JUNE 2011
UNIVERSAL SERIAL BUS (USB) POWER-DISTRIBUTION REQUIREMENTS
One application for this device is for current limiting in universal serial bus (USB) applications. The original USB
interface was a 12-Mb/s or 1.5-Mb/s, multiplexed serial bus designed for low-to-medium bandwidth PC
peripherals (e.g., keyboards, printers, scanners, and mice). As the demand for more bandwidth increased, the
USB 2.0 standard was introduced increasing the maximum data rate to 480-Mb/s. The four-wire USB interface is
conceived for dynamic attach-detach (hot plug-unplug) of peripherals. Two lines are provided for differential data,
and two lines are provided for 5-V power distribution.
USB data is a 3.3-V level signal, but power is distributed at 5 V to allow for voltage drops in cases where power
is distributed through more than one hub across long cables. Each function must provide its own regulated 3.3 V
from the 5-V input or its own internal power supply. The USB specification classifies two different classes of
devices depending on its maximum current draw. A device classified as low-power can draw up to 100 mA as
defined by the standard. A device classified as high-power can draw up to 500 mA. It is important that the
minimum current-limit threshold of the current-limiting power-switch exceed the maximum current-limit draw of
the intended application. The latest USB standard should always be referenced when considering the
current-limit threshold
The USB specification defines two types of devices as hubs and functions. A USB hub is a device that contains
multiple ports for different USB devices to connect and can be self-powered (SPH) or bus-powered (BPH). A
function is a USB device that is able to transmit or receive data or control information over the bus. A USB
function can be embedded in a USB hub. A USB function can be one of three types included in the list below.
Low-power, bus-powered function
High-power, bus-powered function
Self-powered function
SPHs and BPHs distribute data and power to downstream functions. The TPS2552/53 has higher current
capability than required for a single USB port allowing it to power multiple downstream ports.
18
Copyright
2008–2011, Texas Instruments Incorporated
相关PDF资料
PDF描述
TPS2553DRVT 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
TPS2552DRVR 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
TPS2552DBVR-1 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
TPS2553DBVT-1 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
TPS2552DBVR 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
相关代理商/技术参数
参数描述
TPS2552DRVT 制造商:Texas Instruments 功能描述:PCMCIA Memory Card IC
TPS2552DRVT-1 功能描述:电源开关 IC - USB Adj Crnt-Ltd Pwr- Dist Sw RoHS:否 制造商:Micrel 电源电压-最小:2.7 V 电源电压-最大:5.5 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-8 封装:Tube
TPS2552DRVT-1 制造商:Texas Instruments 功能描述:PCMCIA Memory Card IC
TPS2553 制造商:TI 功能描述:intended for applications such as USB where heavy capacitive loads and short-circuits are likely to be encountered capacitive loads and short circuits (More...)
TPS2553DBV1EVM-364 功能描述:交换机 IC 开发工具 TPS2553DBV1EVM-364 Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:USB Power Switches 工具用于评估:MAX4984E 工作电源电压:2.8 V to 5.5 V