参数资料
型号: TPS3824-30QDBVRQ1
厂商: TEXAS INSTRUMENTS INC
元件分类: 电源管理
英文描述: 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5
封装: GREEN, PLASTIC, SOT-23, 5 PIN
文件页数: 8/15页
文件大小: 276K
代理商: TPS3824-30QDBVRQ1
TPS3820-xx-Q1, TPS3823-xx-Q1, TPS3824-xx-Q1, TPS3825-xx-Q1, TPS3828-xx-Q1
PROCESSOR SUPERVISORY CIRCUITS
SGLS143B DECEMBER 2002 REVISED JUNE 2008
2
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
description (continued)
During power-on, RESET is asserted when supply voltage VDD becomes higher than 1.1 V. Thereafter, the
supply voltage supervisor monitors VDD and keeps RESET active as long as VDD remains below the threshold
voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system
reset. The delay time, td, starts after VDD has risen above the threshold voltage VIT. When the supply voltage
drops below the threshold voltage VIT, the output becomes active (low) again. No external components are
required. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage
divider.
The TPS3820/3/5/8 devices incorporate a manual reset input, MR. A low level at MR causes RESET to become
active. The TPS3824/5 devices include a high-level output RESET. TPS3820/3/4/8 have a watchdog timer that
is periodically triggered by a positive or negative transition at WDI. When the supervising system fails to retrigger
the watchdog circuit within the time-out interval, ttout, RESET becomes active for the time period td. This event
also reinitializes the watchdog timer. Leaving WDI unconnected disables the watchdog.
In applications where the input to the WDI pin may be active (transitioning high and low) when the
TPS3820/3/4/8 is asserting RESET, the TPS3820/3/4/8 does not return to a non-reset state when the input
voltage is above Vt. If the application requires that input to WDI is active when RESET is asserted, WDI must
be decoupled from the active signal. This can be accomplished by using an N-channel FET in series with the
WDI pin, with the gate of the FET connected to the RESET output as shown in Figure 1.
WDI
RESET
TPS3824
WDI External
Figure 1
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available
in a 5-pin SOT23-5 package. The TPS382x-xxQ devices are characterized for operation over a temperature
range of 40
°C to 125°C, and are qualified in accordance with AEC-Q100 stress test qualification for integrated
circuits.
相关PDF资料
PDF描述
TPS61120RSARG4 1.6 A BATTERY CHARGE CONTROLLER, 600 kHz SWITCHING FREQ-MAX, PQCC16
TC151A3612EOA723 0.25 A SWITCHING REGULATOR, 50 kHz SWITCHING FREQ-MAX, PDSO8
TC151B4319EOA713 0.25 A SWITCHING REGULATOR, 50 kHz SWITCHING FREQ-MAX, PDSO8
TC151A5735EOA723 0.25 A SWITCHING REGULATOR, 50 kHz SWITCHING FREQ-MAX, PDSO8
TC151B2947EOA723 0.25 A SWITCHING REGULATOR, 50 kHz SWITCHING FREQ-MAX, PDSO8
相关代理商/技术参数
参数描述
TPS3824-33DBVR 功能描述:监控电路 2.93V Monitor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel
TPS3824-33DBVRG4 功能描述:监控电路 Supply Voltage Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel
TPS3824-33DBVT 功能描述:监控电路 Supply Voltage Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel
TPS3824-33DBVTG4 功能描述:监控电路 Supply Voltage Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel
TPS3824-33QDBVRQ1 功能描述:监控电路 Supply Voltage Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel