参数资料
型号: TPS62410DRCRG4
厂商: Texas Instruments
文件页数: 24/33页
文件大小: 0K
描述: IC REG BUCK SYNC ADJ 0.8A 10SON
标准包装: 3,000
类型: 降压(降压)
输出类型: 可调式
输出数: 2
输出电压: 0.6 V ~ 6 V
输入电压: 2.5 V ~ 6 V
PWM 型: 电压模式
频率 - 开关: 2.25MHz
电流 - 输出: 800mA
同步整流器:
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 10-VFDFN 裸露焊盘
包装: 带卷 (TR)
供应商设备封装: 10-SON 裸露焊盘(3x3)
www.ti.com
SLVS737 – FEBRUARY 2007
APPLICATION INFORMATION (continued)
TPS62410
VIN 3.3 V – 6 V
C IN
10 m F
VIN
FB 1
SW1
L1
2.2 m H
R11
270 k W
V OUT1 = 1.5 V
up to 800 mA
C OUT1 = 10 m F
EN_1
DEF_1
R12
180 k W
Cff2
EN_2
MODE/
DATA
SW2
L2
3.3 m H
R21
825 k W 33 pF
V OUT2 = 2.85 V
up to 800 mA
C OUT2 = 10 m F
ADJ2
GND
R22
220 k W
Figure 34. Typical Application Circuit 1.5V/2.85V Adjustable Outputs
OUTPUT FILTER DESIGN (INDUCTOR AND OUTPUT CAPACITOR)
The device is optimized to operate with inductors of 2.2 μ H to 4.7 μ H and output capacitors of 10 μ F to 22 μ F.
For operation with a 2.2 μ H inductor, a 22 μ F capacitor is suggested.
Inductor Selection
The selected inductor has to be rated for its DC resistance and saturation current. The DC resistance of the
inductance will influence directly the efficiency of the converter. Therefore an inductor with lowest DC resistance
should be selected for highest efficiency.
Equation 6 calculates the maximum inductor current under static load conditions. The saturation current of the
inductor should be rated higher than the maximum inductor current as calculated with Equation 7 . This is
recommended because during heavy load transient the inductor current will rise above the calculated value.
1 * Vout
DI L + Vout
Vin
L ?
(6)
I Lmax + I outmax )
D I L
2
(7)
With:
f = Switching Frequency (2.25MHz typical)
L = Inductor Value
? I L = Peak to Peak inductor ripple current
I Lmax = Maximum Inductor current
The highest inductor current will occur at maximum Vin.
Open core inductors have a soft saturation characteristic and they can usually handle higher inductor currents
versus a comparable shielded inductor.
A more conservative approach is to select the inductor current rating just for the maximum switch current of the
corresponding converter. It must be considered, that the core material from inductor to inductor differs and will
have an impact on the efficiency especially at high switching frequencies.
24
相关PDF资料
PDF描述
MAX6314US34D1+T IC RESET CIRCUIT 3.40V SOT143-4
RYM28DRMD-S288 CONN EDGECARD 56POS .156 EXTEND
HMC12DRXH CONN EDGECARD 24POS DIP .100 SLD
VI-B01-EX-F1 CONVERTER MOD DC/DC 12V 75W
RCA40DTKN-S288 CONN EDGECARD 80POS .125 EXTEND
相关代理商/技术参数
参数描述
TPS62410DRCT 功能描述:直流/直流开关调节器 2.25MHZ 2x800mA Dual Step-Down RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
TPS62410DRCT 制造商:Texas Instruments 功能描述:IC DUAL STPDN CONV 2X0.8A 10SON 制造商:Texas Instruments 功能描述:IC, DUAL STPDN CONV 2X0.8A 10SON 制造商:Texas Instruments 功能描述:IC, DUAL STPDN CONV 2X0.8A 10SON; Primary Input Voltage:6V; No. of Outputs:2; Output Voltage:6V; Output Current:800mA; Voltage Regulator Case Style:SON; No. of Pins:10; Operating Temperature Min:-40C; Operating Temperature Max:85C;;RoHS Compliant: Yes
TPS62410DRCTG4 功能描述:直流/直流开关转换器 2.25MHZ 2x800mA Dual St-Down Cnvrtr RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TPS62410Q1-EVM 功能描述:EVALUATION MODULE 制造商:texas instruments 系列:* 零件状态:在售 标准包装:1
TPS62410QDRCRQ1 功能描述:直流/直流开关转换器 2.25MHZ 2x800mA Dual Step-Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT