- 您现在的位置：买卖IC网 > PDF目录300041 > TPS75425QPWPREP (TEXAS INSTRUMENTS INC) 2.5 V FIXED POSITIVE LDO REGULATOR, PDSO20 PDF资料下载
参数资料
| 型号： | TPS75425QPWPREP |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 2.5 V FIXED POSITIVE LDO REGULATOR, PDSO20 |
| 封装： | PLASTIC, HTSSOP-20 |
| 文件页数： | 8/31页 |
| 文件大小： | 608K |
| 代理商： | TPS75425QPWPREP |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页
TPS75201EP, TPS75215EP, TPS75218EP, TPS75225EP, TPS75233EP WITH RESET
TPS75401EP, '75415EP, '75418EP, '75425EP, '75433EP WITH POWER GOOD
FAST TRANSIENT RESPONSE 2A LOW DROPOUT VOLTAGE REGULATORS
SGLS165 APRIL 2003
16
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
APPLICATION INFORMATION
output capacitor
As with most LDO regulators, the TPS752xx and TPS754xx require an output capacitor connected between OUT
and GND to stabilize the internal control loop. The minimum recommended capacitance value is 47
F and the ESR
(equivalent series resistance) must be between 100 m
and 10 . Solid tantalum electrolytic, aluminum electrolytic,
and multilayer ceramic capacitors are all suitable, provided they meet the requirements described in this section.
Larger capacitors provide a wider range of stability and better load transient response.
This information, along with the ESR graphs, is included to assist in selection of suitable capacitance for the user’s
application. When necessary to achieve low height requirements along with high output current and/or high load
capacitance, several higher ESR capacitors can be used in parallel to meet these guidelines.
ESR and transient response
LDOs typically require an external output capacitor for stability. In fast transient response applications, capacitors
are used to support the load current while LDO amplifier is responding. In most applications, one capacitor is used
to support both functions.
Besides its capacitance, every capacitor also contains parasitic impedances. These parasitic impedances are
resistive as well as inductive. The resistive impedance is called equivalent series resistance (ESR), and the
inductive impedance is called equivalent series inductance (ESL). The equivalent schematic diagram of any
capacitor can therefore be drawn as shown in Figure 21.
RESR
LESL
C
Figure 21. ESR and ESL
相关PDF资料 |
PDF描述 |
|---|---|
| TPSMC10A/7 | 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB |
| TPSMC43A/7 | 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB |
| TPSMC6.8A/7 | 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB |
| TPT-MR-04-CCDF5 | FIBER OPTIC TRANSCEIVER, 1529-1564nm, 11300Mbps(Tx), 11300Mbps(Rx), PANEL MOUNT, FC/UPC CONNECTOR |
| TPT-MR-04-CCDFF | FIBER OPTIC TRANSCEIVER, 1529-1564nm, 11300Mbps(Tx), 11300Mbps(Rx), PANEL MOUNT, FC/UPC CONNECTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS75425QPWPRG4 | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 2-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TPS75433QPWP | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 2-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TPS75433QPWPG4 | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 2-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TPS75433QPWPR | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 2-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| TPS75433QPWPRG4 | 功能描述:低压差稳压器 - LDO Fast-Tran-Resp 2-A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。