参数资料
型号: TRM-433-LT
厂商: Linx Technologies Inc
文件页数: 18/44页
文件大小: 0K
描述: TRANSCEIVER RF 433MHZ LT SERIES
产品目录绘图: TRM-433-LT Top
TRM-433-LT Side
特色产品: LT Series Long-Range RF Transceiver Modules
标准包装: 34
系列: LT
频率: 433MHz
数据传输率 - 最大: 10kbps
调制或协议: AM,OOK
应用: 双向传呼,ISM,机器人,遥测
功率 - 输出: 10dBm
灵敏度: -112dBm
电源电压: 2.1 V ~ 3.6 V
电流 - 接收: 6.1mA
电流 - 传输: 12mA
数据接口: PCB,表面贴装
天线连接器: PCB,表面贴装
工作温度: -40°C ~ 85°C
封装/外壳: 表面安装
包装: 管件
Using the PDN Line
The Power Down (PDN) line can be used to power down the transceiver
without the need for an external switch. This line has an internal pull-down,
so when it is held low or simply left floating, the module will be inactive.
When the PDN line is pulled to ground, the transceiver will enter into a low-
current (~20μA) power-down mode. During this time the transceiver is off
and cannot perform any function. It may be useful to note that the startup
time coming out of power-down will be slightly less than when applying
V CC .
The PDN line allows easy control of the receiver state from external
components, such as a microcontroller. By periodically activating the
transceiver, sending data, then powering down, the transceiver’s average
current consumption can be greatly reduced, saving power in battery-
operated applications.
Note: If the T/R_SEL line is toggled when the transceiver is powered
down, internal logic will wake up and increase the current consumption
to approximately 350μA. When high, the T/R_SEL line will sink
approximately 15μA, so the lowest current consumption is obtained by
placing the LT into receive mode before powering down.
Using the RSSI Line
The transceiver’s Received Signal Strength Indicator (RSSI) line serves a
variety of functions. This line has a dynamic range of 80dB (typical) and
outputs a voltage proportional to the incoming signal strength. It should be
noted that the RSSI levels and dynamic range will vary slightly from part
to part. It is also important to remember that RSSI output indicates the
strength of any in-band RF energy and not necessarily just that from the
intended transmitter; therefore, it should be used only to qualify the level
and presence of a signal. Using RSSI to determine distance or data validity
is not recommended.
The RSSI output can be utilized during testing, or even as a product
feature, to assess interference and channel quality by looking at the RSSI
level with all intended transmitters shut off. RSSI can also be used in
direction-finding applications, although there are many potential perils to
consider in such systems. Finally, it can be used to save system power by
“waking up” external circuitry when a transmission is received or crosses a
– 14 –
相关PDF资料
PDF描述
DP-241-7-10L XFRMR PWR 115/230V 10VCT 5A LEAD
7W-1.544MBB-T OSC 1.544 MHZ 3.3V SMD
701-W TEST WEIGHT 5 LBS
FQPF7N80C MOSFET N-CH 800V 6.6A TO-220F
14A-56-20 XFRMR PWR 115/230V 10V 5.6A
相关代理商/技术参数
参数描述
TRM5 制造商:Ferraz Shawmut 功能描述:Fuse Midget 5A 250V Slow Blow 2-Pin Cartridge Holder
TRM-5 制造商:Richco 功能描述:Rivet,Push,HS Black,1K/Bag 制造商:Richco 功能描述:RIVET BLACK .155-.180" HOLD
TRM50 功能描述:测试接头 TRM50,50 OHM Feed Thru Terminator BNC RoHS:否 制造商:Murata
TRM-5001AG 制造商:OPTOWAY 制造商全称:Optoway Technology Inc 功能描述:5V / 1310 nm / 622 Mbps RoHS Compliant Optical Multi-Mode Transceiver
TRM-5001G 制造商:OPTOWAY 制造商全称:Optoway Technology Inc 功能描述:5V / 1310 nm / 622 Mbps RoHS Compliant Optical Multi-Mode Transceiver