参数资料
型号: TS80C52X2-VIBB
厂商: TEMIC SEMICONDUCTORS
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP44
封装: PLASTIC, LCC-44
文件页数: 39/56页
文件大小: 689K
代理商: TS80C52X2-VIBB
44
Rev. C - Aug. 31, 1999
TS80C52X2
10.5 AC Parameters
10.5.1 Explanation of the AC Symbols
Each timing symbol has 5 characters. The first character is always a “T” (stands for time). The other characters,
depending on their positions, stand for the name of a signal or the logical status of that signal. The following is
a list of all the characters and what they stand for.
Example:TAVLL = Time for Address Valid to ALE Low.
TLLPL = Time for ALE Low to PSEN Low.
TA =0to+70
°C (commercial temperature range); V
SS =0V;VCC =5V ± 10%; -M and -V ranges.
TA = -40
°Cto+85°C (industrial temperature range); V
SS =0V;
VCC =5V ± 10%; -M and -V ranges.
TA =0to+70
°C (commercial temperature range); V
SS =0V;2.7V<VCC < 5.5 V; -L range.
TA = -40
°Cto+85°C (industrial temperature range); V
SS =0V;2.7V<VCC < 5.5 V; -L range.
Table 24. gives the maximum applicable load capacitance for Port 0, Port 1, 2 and 3, and ALE and PSEN signals.
Timings will be guaranteed if these capacitances are respected. Higher capacitance values can be used, but timings
will then be degraded.
Table 24. Load Capacitance versus speed range, in pF
Table 26., Table 29. and Table 32. give the description of each AC symbols.
Table 27., Table 30. and Table 33. give for each range the AC parameter.
Table 28., Table 31. and Table 34. give the frequency derating formula of the AC parameter. To calculate each
AC symbols, take the x value corresponding to the speed grade you need (-M, -V or -L) and replace this value
in the formula. Values of the frequency must be limited to the corresponding speed grade:
Table 25. Max frequency for derating formula regarding the speed grade
Example:
TLLIV in X2 mode for a -V part at 20 MHz (T = 1/20
E6 = 50 ns):
T= 50ns
TLLIV=2T-x=2x50-25= 75ns
-M
-V
-L
Port 0
100
50
100
Port 1, 2, 3
80
50
80
ALE / PSEN
100
30
100
-M X1 mode
-M X2 mode
-V X1 mode
-V X2 mode
-L X1 mode
-L X2 mode
Freq (MHz)
40
20
40
30
20
T (ns)
25
50
25
33.3
50
相关PDF资料
PDF描述
TS914AIYDT QUAD OP-AMP, 7000 uV OFFSET-MAX, 0.8 MHz BAND WIDTH, PDSO14
TS914IYDT QUAD OP-AMP, 12000 uV OFFSET-MAX, 0.8 MHz BAND WIDTH, PDSO14
TS914IYD QUAD OP-AMP, 12000 uV OFFSET-MAX, 0.8 MHz BAND WIDTH, PDSO14
TS914AIYD QUAD OP-AMP, 7000 uV OFFSET-MAX, 0.8 MHz BAND WIDTH, PDSO14
TS922AIYD DUAL OP-AMP, 1800 uV OFFSET-MAX, 4 MHz BAND WIDTH, PDSO8
相关代理商/技术参数
参数描述
TS80C52X2-VIBD 制造商:TEMIC 制造商全称:TEMIC Semiconductors 功能描述:8-bit CMOS Microcontroller 0-60 MHz
TS80C52X2-VIBR 制造商:TEMIC 制造商全称:TEMIC Semiconductors 功能描述:8-bit CMOS Microcontroller 0-60 MHz
TS80C52X2-VICB 制造商:TEMIC 制造商全称:TEMIC Semiconductors 功能描述:8-bit CMOS Microcontroller 0-60 MHz
TS80C52X2-VICD 制造商:TEMIC 制造商全称:TEMIC Semiconductors 功能描述:8-bit CMOS Microcontroller 0-60 MHz
TS80C52X2-VICR 制造商:TEMIC 制造商全称:TEMIC Semiconductors 功能描述:8-bit CMOS Microcontroller 0-60 MHz