- 您现在的位置：买卖IC网 > PDF目录69541 > TXS80ZC-NP2R1V (POWER-ONE INC) 1-OUTPUT 160 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | TXS80ZC-NP2R1V |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 160 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | 2.400 X 3.450 INCH, 0.500 INCH HEIGHT, 3/4 BRICK PACKAGE-14 |
| 文件页数： | 10/27页 |
| 文件大小： | 2635K |
| 代理商： | TXS80ZC-NP2R1V |
第1页第2页第3页第4页第5页第6页第7页第8页第9页当前第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
Product Specification
TXS Series: 75…120 A DC-DC Converters
36 to 75 V DC Input, 1.2, 1.5, 1.8, 2.0 and 2.5 V Output, 90 W to 250 W
REV. FEB 18, 2003
18 of 27
www.power-one.com
Safety Considerations
TXS modules have been designed for building into
system
applications
in
pollution
degree
2
environments
1.
The converters provide basic insulation
1 from
input to output and from input to the metallic base
plate. The insulation supports 1500 V DC electric
strength test voltage and has an insulation
resistance >50 M
.
The converters provide functional insulation
1
between output and base plate. The insulation
supports 500 V DC electric strength test voltage.
The base plate is normally floating. For safety
reasons the base plate may only be connected to
the secondary or safety ground.
If the system using the converter requires safety
agency approval, certain rules should be followed
in the design of the system. In particular, all
creepage and clearance distance requirements of
the appropriate standard should be observed. This
document refers to UL 60950, EN 60950:2000 and
CSA 60950-00 only. Specific applications may
have additional requirements.
The converter has no internal fuse. An external
fuse should be provided to protect the system. For
UL purpose the fuse needs to be UL-listed. A fuse
rating not greater than 10 A is recommended. The
user can select a lower rating fuse based upon the
inrush transient of the input filter and the maximum
input current of the converter (see page 2). Both
input tracks and the chassis ground track (if
applicable) should be capable of conducting a
current of 1.5 times the value of the fuse without
failure. The fuse should be placed in the non-
grounded input line.
The maximum specified input voltage is 100 V
DC for 100 ms. Exceeding of this voltage limit may
destroy the input stage of the converter but it will
not damage the insulation
2.
If an input supply other than SELV is used, the
components on the primary of the converter may
need to be considered as hazardous. The report:
“TXS layout considerations” on the TXS CD ROM
provides recommendations for the PCB layout
beneath the converter.
1 According to UL 60950, EN 60950:2000, CSA 60950-00
2 The creepage and clearance distance and the insulation
thickness were dimensioned for 200 V DC. The
converters have been approved for basic insulation. It is
in the responsibility of the customer to use the converter
in applications, where supplementary insulation is
required.
Definitions
The following section should help to classify the
supplying circuit of the converter. For the precise
identification of the voltage types in a system, the
relevant safety standard should be used.
Primary circuit = Circuit connected to the AC mains
which makes it hazardous per definition.
Secondary circuit = Circuit which is isolated from a
primary circuit. A battery without connection to a
primary circuit is considered to be a secondary
circuit.
SELV, ELV and TNV are secondary circuits.
SELV = User accessible secondary circuit with
U <60 V DC and no transients. An SELV circuit
remains safe even after single faults.
ELV = Basic insulated circuit with the same limits
as a SELV circuit but without protection to 60 V in
case of a single fault.
TNV = Double or reinforced insulated secondary
circuit, isolated from earth and connected to a
telecommunication network or a circuit meeting the
TNV specifications.
Table 8: Normal condition:
With
Transients
1
Without Transients
TNV-1
ELV
SELV
<60 V DC or 42.4 V AC peak
TNV-3
TNV-2
<120 V DC or 70.7 V AC peak
2
Table 9: Maximum voltage after a single fault:
With
Transients
1
Without Transients
TNV-1
ELV
SELV
<120 V continuous
3
Possibly
hazardous
<60 V, 120 V
for 0.2 s max
TNV-3
TNV-2
<120 V continuous
3
1 Up to 1.5 kV transients possible.
2 For DC voltages with overlaid AC voltages the limit:
UAC/70.7 V + UDC/120 V < 1 applies.
Exception: According deviation 2 in UL60950, the limit
80 V DC instead of 120 V DC applies in a DC-power
system for TNV2.
3 In the event of a single fault, the voltage can
rise to 1500 V for 1 ms, then fall down to 400 V within
14 ms and stay at 400 V DC over 185 ms. Limiting
curve, see figure in IEC 60950:2000.
SELV:
Safety Extra Low Voltage
ELV:
Extra Low Voltage
TNV:
Telecommunication Network Voltage
相关PDF资料 |
PDF描述 |
|---|---|
| TXS80ZD-NP2R2H | 1-OUTPUT 200 W DC-DC REG PWR SUPPLY MODULE |
| W9725G6IB-18 | 16M X 16 DDR DRAM, 0.35 ns, PBGA84 |
| W9864G6EB-7 | 4M X 16 SYNCHRONOUS DRAM, 5.5 ns, PBGA60 |
| WE128K8200CQ | 128K X 8 EEPROM 5V MODULE, 200 ns, CDIP32 |
| WED9LC6816V1512BI | SPECIALTY MEMORY CIRCUIT, PBGA153 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TXS80ZD | 制造商:Power-One 功能描述: |
| TXS-86-515-S | 制造商:FLOYD BELL 功能描述:Alarm, Piezoelectric, 92 dBA to 103 dBA @ 2 Ft., Extra Loud Siren, 5-15VDC |
| TXS-86-515-SR | 制造商:FLOYD BELL 功能描述:Alarm, Piezoelectric, 92 dBA to 103 dBA @ 2 Ft., Extra Loud Siren, 5-15VDC |
| TX-SAW433S-Z-RFM | 制造商:AUREL 功能描述:RF MODULE TX OOK 434MHZ EXT ANT 制造商:AUREL 功能描述:RF MODULE, TX, OOK, 434MHZ, EXT ANT 制造商:AUREL 功能描述:RF MODULE, TX, OOK, 434MHZ, EXT ANT, Frequency:433.92MHz, Supply Voltage Min:4.5 |
| TX-SDK-V1/NOPB | 功能描述:数据转换 IC 开发工具 TX-SDK-V1 EVAL BRD RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
发布紧急采购，3分钟左右您将得到回复。