- 您现在的位置：买卖IC网 > PDF目录18784 > UPG2214TK-E2-A (CEL)IC SWITCH SPDT 6-MINIMOLD PDF资料下载
参数资料
| 型号： | UPG2214TK-E2-A |
| 厂商： | CEL |
| 文件页数： | 11/12页 |
| 文件大小： | 0K |
| 描述： | IC SWITCH SPDT 6-MINIMOLD |
| 标准包装： | 5,000 |
| RF 型： | 802.11a/b/g/Wi-Fi，802.16/WiMax，WLAN |
| 频率： | 50MHz ~ 3GHz |
| 特点： | SPDT |
| 封装/外壳： | 6-TSSOP，SC-88，SOT-363 |
| 供应商设备封装： | 6-SuperMiniMold |
| 包装： | 带卷 (TR) |
? PG2214TK
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
methods and conditions other than those recommended below, contact your nearby sales office.
For soldering
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220 ? C or higher
Preheating time at 120 to 180 ? C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (package surface temperature)
Time at temperature of 200 ? C or higher
Preheating time at 120 to 150 ? C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature)
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (pin temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 260 ? C or below
: 10 seconds or less
: 60 seconds or less
: 120 ? 30 seconds
: 3 times
: 0.2%(Wt.) or below
: 215 ? C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
: 0.2%(Wt.) or below
: 260 ? C or below
: 10 seconds or less
: 120 ? C or below
: 1 time
: 0.2%(Wt.) or below
: 350 ? C or below
: 3 seconds or less
: 0.2%(Wt.) or below
IR260
VP215
WS260
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10475EJ04V0DS
11
相关PDF资料 |
PDF描述 |
|---|---|
| UPG2406TK-E2-A | IC SPDT 10MHZ-3GHZ 6-MINIMOLD |
| IRF3708SPBF | MOSFET N-CH 30V 62A D2PAK |
| MAX12005ETM+ | IC SATELLITE IF SWITCH 48-TQFN |
| UPG2012TB-A | IC SWITCH SPDT 6-SMINI |
| UPG2418TB-A | IC SW SPDT 0.5-3.0GHZ 6-MINIMOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| UPG2214TK-E2-A(5KREEL) | 制造商:Renesas Electronics Corporation 功能描述:RF AND MICROWAVE SWITCH |
| UPG2214TK-EVAL | 功能描述:交换机 IC 开发工具 For UPG2214TK-A RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:USB Power Switches 工具用于评估:MAX4984E 工作电源电压:2.8 V to 5.5 V |
| UPG2214TK-EVAL-A | 功能描述:交换机 IC 开发工具 For UPG2214TK-A RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:USB Power Switches 工具用于评估:MAX4984E 工作电源电压:2.8 V to 5.5 V |
| UPG2227T5F | 制造商:CEL 制造商全称:CEL 功能描述:NECs L-BAND SP3T SWITCH |
| UPG2227T5F-A | 功能描述:射频放大器 SWITCH SP3T RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。