参数资料
型号: US1881LUA-AAA-000-BU
厂商: Melexis Technologies NV
文件页数: 28/46页
文件大小: 498K
描述: IC LATCH CMOS MP TO-92UA
产品目录绘图: UA-92 Series Side
标准包装: 1,000
传感范围: 9.5mT 跳闸,-9.5mT 释放
类型: 双极卡锁
电源电压: 3.5 V ~ 24 V
电流 - 电源: 5mA
电流 - 输出(最大): 50mA
输出类型: 数字式,开漏极
工作温度: -40°C ~ 150°C
封装/外壳: TO-226-3,TO-92-3 短体
供应商设备封装: TO-92UA
包装: 散装
产品目录页面: 2792 (CN2011-ZH PDF)
其它名称: US1881LUA
US1881LUA-ND
Flux Concentrators
A flux concentrator, or pole piece, is a ferrous material used to significantly increase the performance of
a Hall Effect Sensor System. When a flux concentrator is placed opposite the pole face of a magnet, the
magnetic field channels through the concentrator, thereby increasing the flux density between the con-
centrator and the pole face.
Figure 13, Flux Concentrator
The reason this magnetic flux channels through the concentrator is because of the reluctance of the fer-
rous material. Reluctance is the resistance that magnetic flux lines experience as they flow from the North
pole into the South pole of a magnet. Ferromagnetic materials have lower reluctance than air, therefore a
pole piece provides an easier path for the flux to flow through, while increasing the flux density at the
same time. There are three benefits to adding a flux concentrator to a magnetic circuit. First, a less sensi-
tive Hall Effect Sensor can be implemented, a result of the increased flux density. The second benefit of
using a flux concentrator is that Hall Effect Sensor with a specific operate level can be actuated a greater
distance from the magnet, than if one were not in use. The addition of a pole piece also allows the use of
a magnet with a lower field intensity. A flux concentrator makes it possible to use a smaller magnet or a
magnet of different material to achieve the same operating characteristics as one with higher flux density
or a larger size. When choosing materials for a pole piece, pay attention to the following characteristics:
The permeability and reluctance of the material will affect its performance as a flux concentrator. Also,
pay close attention to the mechanical characteristics of machining and corrosion. These properties are
very important when selecting an alloy.
Section 3 - Applications
3-9
N
Magnet
S
Ferrous
Concentrator
相关PDF资料
PDF描述
R7202206XXOO RECTIFIER 2200V 600A
MDD250-08N1 MOD DIODE DUAL 800V Y2-DCB
601W-60 YEL LEAD TEST MINIHK-BANAPLG 60"
US4881EUA-AAA-000-BU IC LATCH CMOS H-SENS TO-92UA
US1881EUA-AAA-000-BU IC LATCH CMOS MP TO-92UA
相关代理商/技术参数
参数描述
US18-PA-5-N03-IH 制造商:IDEC CORPORATION 功能描述:95B040020 Sensor Ultrasonic
US18-PA-5-N03-OH 制造商:IDEC Corporation 功能描述:SENSOR, M18 STRGHT BARREL NPN/PNP OUTPUT 制造商:IDEC Corporation 功能描述:95B040000 Ultrasonic M18Sensor
US18-PA-5-N03-VH 制造商:IDEC Corporation 功能描述:95B040040 Ultrasonic M18Sensor
US18-PR-5-N03-IH 制造商:IDEC Corporation 功能描述:95B040030 Sensor Ultrasonic
US18-PR-5-N03-OH 制造商:IDEC Corporation 功能描述:95B040010 Sensor Ultrasonic