参数资料
型号: US5881LUA-AAA-000-BU
厂商: Melexis Technologies NV
文件页数: 20/46页
文件大小: 498K
描述: IC HALL EFFECT SW MP TO-92UA
产品目录绘图: UA-92 Series Side
标准包装: 1,000
传感范围: 30mT 跳闸,9.5mT 释放
类型: 单极开关
电源电压: 3.5 V ~ 24 V
电流 - 电源: 5mA
电流 - 输出(最大): 50mA
输出类型: 数字式,开漏极
工作温度: -40°C ~ 150°C
封装/外壳: TO-226-3,TO-92-3 短体
供应商设备封装: TO-92UA
包装: 散装
产品目录页面: 2792 (CN2011-ZH PDF)
其它名称: US5881LUA
US5881LUA-ND
Section 3 - Applications
3-28
Magnetic Design
Input Characteristics
Digital Hall-Effect Sensors have specific magnetic response characteristics that govern their actuation
from OFF to ON. These characteristics are classified in terms of operate point, release point and differ-
ential. The operate point, commonly referred to as BOP, is the point at which the magnetic flux density
turns the Hall Sensor ON, allowing current to flow from the output to ground. Conversely, the release
point, commonly referred to as BRP, is the point at which the magnetic flux density turns the Hall Sensor
OFF. The absolute difference between BOP and BRP is referred to as Hysteresis, Bhys. The purpose of
hysteresis is to eliminate false triggering, which can be caused by minor variations in input, electrical
noise and mechanical vibration. There are three basic types of Digital Hall Sensors commonly used, as
listed below:
Switch - (unipolar) Operates with a single magnetic pole. Guaranteed not to latch ON in the absence of
a magnetic field. Opposing field has no effect. Generally used for mechanical switch replace
ment.
Latch - (bipolar) responds to both magnetic poles. Turns on in the presence of North or south pole, and
turns off only when the opposing field is sufficiently strong. Guaranteed to latch. Used primary
ily in brushless DC motor applications.
Bipolar Switch - (unipolar or bipolar) described as a device which responds to the zero-crossing from
North to South poles
The Hall-Effect Latch
The latch is a type of Hall IC which remains in either state (output ON or Off) until an opposite pole mag-
net is applied. A South magnetic pole turns the device ON (BOP). The device will stay ON until a North
magnetic pole is applied and turns it OFF (BRP). Melexis manufactures two types of Hall Effect latches.
designated for .2.2V to 18V operation. The US2880 series of Hall Effect Latches are designed for high
sensitivity. For more information refer to the data sheet section of this manual.
The Hall Effect Switch
There are two types of Hall Effect Switches, unipolar. The unipolar switch is normally OFF in the
absence of a magnetic field. The device turns ON (BOP) in the presence of a sufficiently strong South
magnetic pole, and turns OFF BRP) in the presence of a weaker South magnetic pole. MELEXIS manu-
factures the US5881UA and US5881SO Hall Effect Switches. For more information refer to the data sheet
section of this manual.
Magnetic Design Considerations
When designing a magnetic circuit, there are five considerations to be covered:
1. Cost of Hall IC, Magnet and Assembly
2. Temperature Range
3. Position Tolerance of Assembled Parts
4. Position Switching Accuracy
5. Tolerance Buildup
相关PDF资料
PDF描述
F1827SD600 MODULE SCR/DIODE 25A 240VAC
US2881EUA-AAA-000-BU IC LATCH CMOS H-SEN TO-92UA
US4881LUA-AAA-000-BU IC LATCH CMOS H-S TO-92UA
DOC052V-010.0M OSC OCVCXO 10.0 MHZ 3.3V SMT
AH337-PL-B IC HALL SWITCH 1PH 25MA SIP-3L
相关代理商/技术参数
参数描述
US5A 制造商:JINANJINGHENG 制造商全称:Jinan Jingheng (Group) Co.,Ltd 功能描述:Surface Mount ultra FAST Rectifier
US5A10AS17120 制造商:NEC 制造商全称:NEC 功能描述:4-BIT SINGLE-CHIP MICROCONTROLLER
US5A10AS17K 制造商:NEC 制造商全称:NEC 功能描述:4-BIT SINGLE-CHIP MICROCONTROLLER
US5A10IE17K 制造商:NEC 制造商全称:NEC 功能描述:4-BIT SINGLE-CHIP MICROCONTROLLER
US5A13AS17120 制造商:NEC 制造商全称:NEC 功能描述:4-BIT SINGLE-CHIP MICROCONTROLLER