
2
W.FL2 SeriesqUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height
sSpecifications
Rating
Nominal characteristic impedance
50
Operating temperature range
-40°C to +90°C
(RH 90% max.)
Frequency range
DC to 6 GHz
Storage temperature range
Item
Specification
1. Contact resistance
20 m max. (center contact), l0 m max. (outer contact)
2. Insulation resistance
500 M min., 100 V DC
3. Withstanding voltage
200 V AC / 1 minute
4. V.S.W.R.
1.3 max. (DC to 3 GHz)
1.4 max. (3 GHz to 6 GHz)
* V.S.W.R. Measurement
as shown on the block diagram below.
Note: Verify connection and measurement setup.
Note1. The term “storage” refers to products stored for long period of time prior to mounting and use.
Note1: Cable assembly measurements with SMA conversion adapters
mated with W.FL2 plug at each end of the 100cm long ultra-fine
coaxial cable.
Note2: Receptacles mounted on a 50 ohms glass epoxy board.
Measurements were conducted with SMA conversion adapters
attached.
Network Analyzer
Test Set
Test Port
Termination
D.U.T
Test Post Cable
-30°C to +70°C
(RH 90% max.)Note 1
sMaterials
Shell
Phosphor bronze
Silver plated
Insulator
PBT
Color: Black, UL94V-0
Female center contact
Phosphor bronze
Gold plated
Part
Material
Finish
Shell
Phosphor bronze
Silver plated
Insulator
LCP
Color: Black, UL94V-0
Male center contact
Brass
Gold plated
Part
Material
Finish
qReceptacle
qPlugs – Right Angle
sPlugs
Plugs can be ordered only as terminated cable assemblies.
2
0.91
3.3
qCable
All dimensions: mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.