参数资料
型号: W25Q16VSFIG
厂商: Winbond Electronics
文件页数: 11/60页
文件大小: 0K
描述: IC FLASH 16MBIT 80MHZ 16SOIC
标准包装: 44
系列: SpiFlash®
格式 - 存储器: 闪存
存储器类型: FLASH
存储容量: 16M(2M x 8)
速度: 80MHz
接口: SPI 串行
电源电压: 2.7 V ~ 3.6 V
工作温度: -40°C ~ 85°C
封装/外壳: 16-SOIC(0.295",7.50mm 宽)
供应商设备封装: 16-SOIC
包装: 管件
W25Q16V
9.2
WRITE PROTECTION
Applications that use non-volatile memory must take into consideration the possibility of noise and other
adverse system conditions that may compromise data integrity. To address this concern the W25Q16
provides several means to protect data from inadvertent writes.
9.2.1
Write Protect Features
?
?
?
?
?
?
?
Device resets when VCC is below threshold
Time delay write disable after Power-up
Write enable/disable instructions and automatic write disable after program and erase
Software and Hardware (/WP pin) write protection using Status Register
Write Protection using Power-down instruction
Lock Down write protection until next power-up (1)
One Time Program (OTP) write protection (1)
Note 1: These features are available upon special order. Please contact Winbond for details.
Upon power-up or at power-down, the W25Q16 will maintain a reset condition while VCC is below the
threshold value of V WI , (See Power-up Timing and Voltage Levels and Figure 30). While reset, all
operations are disabled and no instructions are recognized. During power-up and after the VCC voltage
exceeds V WI , all program and erase related instructions are further disabled for a time delay of t PUW .
This includes the Write Enable, Page Program, Sector Erase, Block Erase, Chip Erase and the Write
Status Register instructions. Note that the chip select pin (/CS) must track the VCC supply level at
power-up until the VCC-min level and t VSL time delay is reached. If needed a pull-up resister on /CS can
be used to accomplish this.
After power-up the device is automatically placed in a write-disabled state with the Status Register Write
Enable Latch (WEL) set to a 0. A Write Enable instruction must be issued before a Page Program,
Sector Erase, Chip Erase or Write Status Register instruction will be accepted. After completing a
program, erase or write instruction the Write Enable Latch (WEL) is automatically cleared to a write-
disabled state of 0.
Software controlled write protection is facilitated using the Write Status Register instruction and setting
the Status Register Protect (SRP0, SRP1) and Block Protect (SEC,TB, BP2, BP1 and BP0) bits. These
settings allow a portion or all of the memory to be configured as read only. Used in conjunction with the
Write Protect (/WP) pin, changes to the Status Register can be enabled or disabled under hardware
control. See Status Register for further information. Additionally, the Power-down instruction offers an
extra level of write protection as all instructions are ignored except for the Release Power-down
instruction.
Publication Release Date: October 7, 2009
- 11 -
Revision E
相关PDF资料
PDF描述
W25Q32BVZPIG IC SPI FLASH 32MBIT 8WSON
W25Q32DWZEIG IC FLASH SPI 32MBIT 8WSON
W25Q40BWSSIG IC FLASH SPI 4MBIT 8SOIC
W25Q40BWZPIG IC FLASH SPI 4MBIT 8WSON
W25Q64BVSFIG IC SPI FLASH 64MBIT 16SOIC
相关代理商/技术参数
参数描述
W25Q16VSSIG 功能描述:IC FLASH 16MBIT 80MHZ 8SOIC RoHS:是 类别:集成电路 (IC) >> 存储器 系列:SpiFlash® 产品变化通告:Product Discontinuation 26/Apr/2010 标准包装:136 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 同步,DDR II 存储容量:18M(1M x 18) 速度:200MHz 接口:并联 电源电压:1.7 V ~ 1.9 V 工作温度:0°C ~ 70°C 封装/外壳:165-TBGA 供应商设备封装:165-CABGA(13x15) 包装:托盘 其它名称:71P71804S200BQ
W25Q16VZPIG 制造商:WINBOND 制造商全称:Winbond 功能描述:16M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI
W25Q20BW 制造商:WINBOND 制造商全称:Winbond 功能描述:1.8V 2M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI
W25Q20BWSNIG 制造商:WINBOND 制造商全称:Winbond 功能描述:1.8V 2M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI
W25Q20BWSNIP 制造商:WINBOND 制造商全称:Winbond 功能描述:1.8V 2M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI