参数资料
型号: WJLXT972ALC.A4
厂商: CORTINA SYSTEMS INC
元件分类: 网络接口
英文描述: DATACOM, ETHERNET TRANSCEIVER, PQFP64
封装: ROHS COMPLIANT, LQFP-64
文件页数: 17/97页
文件大小: 1281K
代理商: WJLXT972ALC.A4
Intel
LXT972A Single-Port 10/100 Mbps PHY Transceiver
24
Datasheet
Document Number: 249186-004
Revision Date: 25-Oct-2005
5.1
Device Overview
The LXT972A Transceiver is a single-port Fast Ethernet 10/100 transceiver that supports 10 Mbps
and 100 Mbps networks. It complies with applicable requirements of IEEE 802.3. It directly drives
either a 100BASE-TX line or a 10BASE-T line.
5.1.1
Comprehensive Functionality
The LXT972A Transceiver provides a standard Media Independent Interface (MII) for 10/100
MACs. The LXT972A Transceiver performs all functions of the Physical Coding Sublayer (PCS)
and Physical Media Attachment (PMA) sublayer as defined in the IEEE 802.3 100BASE-X
standard. It also performs all functions of the Physical Media Dependent (PMD) sublayer for
100BASE-TX connections.
The LXT972A Transceiver reads its configuration pins on power-up to check for forced operation
settings.
If the LXT972A Transceiver is not set for forced operation, it uses auto-negotiation/parallel
detection to automatically determine line operating conditions. If the PHY device on the other side
of the link supports auto-negotiation, the LXT972A Transceiver auto-negotiates with it using Fast
Link Pulse (FLP) Bursts. If the PHY partner does not support auto-negotiation, the LXT972A
Transceiver automatically detects the presence of either link pulses (10 Mbps PHY) or Idle
symbols (100 Mbps PHY) and sets its operating conditions accordingly.
The LXT972A Transceiver provides half-duplex and full-duplex operation at 100 Mbps and 10
Mbps.
5.1.2
Optimal Signal Processing Architecture
The LXT972A Transceiver incorporates high-efficiency Optimal Signal Processing (OSP) design
techniques, which combine optimal properties of digital and analog signal processing.
The receiver utilizes decision feedback equalization to increase noise and cross-talk immunity by
as much as 3 dB over an ideal all-analog equalizer. Using OSP mixed-signal processing techniques
in the receive equalizer avoids the quantization noise and calculation truncation errors found in
traditional DSP-based receivers (typically complex DSP engines with A/D converters). This results
in improved receiver noise and cross-talk performance.
The OSP signal processing scheme also requires substantially less computational logic than
traditional DSP-based designs. This lowers power consumption and also reduces the logic
switching noise generated by DSP engines. This logic switching noise can be a considerable source
of EMI generated on the device’s power supplies.
The OSP-based LXT972A Transceiver provides improved data recovery, EMI performance, and
low power consumption.
相关PDF资料
PDF描述
WJLXT972MLC.A4-864101 DATACOM, ETHERNET TRANSCEIVER, PQFP48
WJLXT972MLC.A4-864115 DATACOM, ETHERNET TRANSCEIVER, PQFP48
WJLXT972MLC.A4SE001 DATACOM, ETHERNET TRANSCEIVER, PQFP48
WJLXT972MLC.A4SE000 DATACOM, ETHERNET TRANSCEIVER, PQFP48
WJLXT972MLC.A4SE001 DATACOM, ETHERNET TRANSCEIVER, PQFP48
相关代理商/技术参数
参数描述
WJLXT972MLC.A4 功能描述:IC TRANS 3.3V ETHERNET 48-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:25 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:4.5 V ~ 5.5 V 安装类型:通孔 封装/外壳:16-DIP(0.300",7.62mm) 供应商设备封装:16-PDIP 包装:管件
WJLXT972MLC.A4 S L7U9 制造商:Intel 功能描述:PHY 1-CH 10Mbps/100Mbps 64-Pin LQFP
WJLXT972MLC.A4-864115 功能描述:TXRX ETH 10/100 SGL PORT 48-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422,RS485 电源电压:4.75 V ~ 5.25 V 安装类型:通孔 封装/外壳:8-DIP(0.300",7.62mm) 供应商设备封装:8-PDIP 包装:管件 产品目录页面:1402 (CN2011-ZH PDF)
WJLXT972MLCA4 制造商:Cortina Systems Inc 功能描述:
WJM1000 功能描述:射频模块 902-928 MHz US ISM EPC Class 1 Gen 2 RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm