参数资料
| 型号： | X9268UV24 |
| 厂商： | Intersil |
| 文件页数： | 2/22页 |
| 文件大小： | 0K |
| 描述： | IC XDCP DUAL 256TAP 50K 24-TSSOP |
| 标准包装： | 62 |
| 系列： | XDCP™ |
| 接片： | 256 |
| 电阻（欧姆）： | 50k |
| 电路数： | 2 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | I²C（设备位址） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 管件 |
10
FN8172.4
August 29, 2006
DEVICE DESCRIPTION
Wiper Counter Register (WCR)
The X9268 contains two Wiper Counter Registers, one
for each DCP potentiometer. The Wiper Counter
Register can be envisioned as a 8-bit parallel and
serial load counter with its outputs decoded to select
one of 256 switches along its resistor array. The
contents of the WCR can be altered in four ways: it
may be written directly by the host via the Write Wiper
Counter Register instruction (serial load); it may be
written indirectly by transferring the contents of one of
four associated data registers via the XFR Data
Register instruction (parallel load); it can be modified
one step at a time by the Increment/Decrement
instruction (See Instruction section for more details).
Finally, it is loaded with the contents of its Data
Register zero (DR0) upon power-up.
The Wiper Counter Register is a volatile register; that
is, its contents are lost when the X9268 is powered-
down. Although the register is automatically loaded
with the value in DR0 upon power-up, this may be
different from the value present at power-down.
Power-up guidelines are recommended to ensure
proper loadings of the DR0 value into the WCR (See
Design Considerations Section).
Data Registers (DR)
Each potentiometer has four 8-bit nonvolatile Data
Registers. These can be read or written directly by the
host. Data can also be transferred between any of the
four Data Registers and the associated Wiper Counter
Register. All operations changing data in one of the
data registers is a nonvolatile operation and will take a
maximum of 10ms.
If the application does not require storage of multiple
settings for the potentiometer, the Data Registers can
be used as regular memory locations for system
parameters or user preference data.
Bit [7:0] are used to store one of the 256 wiper
positions (0~255).
Table 4. Wiper counter Register, WCR (8-bit), WCR[7:0]: Used to store the current wiper position (Volatile, V).
Table 5. Data Register, DR (8-bit), Bit [7:0]: Used to store wiper positions or data (Nonvolatile, NV).
WCR7
WCR6
WCR5
WCR4
WCR3
WCR2
WCR1
WCR0
V
VVVVVVV
(MSB)
(LSB)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
NV
MSB
LSB
X9268
相关PDF资料 |
PDF描述 |
|---|---|
| X9269UV24IZ-2.7T1 | IC XDCP DUAL 256TAP 50K 24-TSSOP |
| X9271UV14T1 | IC XDCP SGL 256TAP 50K 14-TSSOP |
| X9279UV14ZT1 | IC XDCP SGL 256TAP 50K 14-TSSOP |
| X9313ZST2 | IC XDCP 32-TAP 1K 3-WIRE 8-SOIC |
| X9314WST2 | IC XDCP SGL 32-TAP 10K 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9269 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Digitally-Controlled Potentiometers |
| X9269_07 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Digitally-Controlled Potentiometers |
| X9269TB16 | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Dual Digitally-Controlled Potentiometers |
| X9269TB16-2.7 | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Dual Digitally-Controlled Potentiometers |
| X9269TB16I | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Dual Digitally-Controlled Potentiometers |
发布紧急采购，3分钟左右您将得到回复。