参数资料
| 型号： | X9455WV24IZ-2.7 |
| 厂商： | Intersil |
| 文件页数： | 2/19页 |
| 文件大小： | 0K |
| 描述： | IC POT DUAL 2WIPER 10K 24-TSSOP |
| 标准包装： | 62 |
| 系列： | XDCP™ |
| 接片： | 256 |
| 电阻（欧姆）： | 10k |
| 电路数： | 2 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 9 线串行（芯片选择，设备位址，动触点位址） |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 管件 |
10
FN8202.1
July 28, 2006
Up/Down Interface Operation
The SCL, U/D, CS, DS0 and DS1 inputs control the
movement of the wiper along the resistor array. With CS set
LOW the device is selected and enabled to respond to the
U/D and SCL inputs. HIGH to LOW transitions on SCL will
increment or decrement (depending on the state of the U/D
input) a wiper counter register selected by DS0 and DS1.
The output of this counter is decoded to select one of 256
wiper positions along the resistor array.
The value of the counter is stored in nonvolatile data register
Level 0 of the corresponding WCR whenever CS transitions
HIGH while the SCL and WP inputs are HIGH (See Table 1).
During a “Store” operation bits WCRSel1 and WCRSel0 in
the status register must be both “0”, which is their power up
default value. Other combinations are reserved and must not
be used.
The system may select the X9455, move a wiper, and
deselect the device without having to store the latest wiper
position in nonvolatile memory. After the wiper movement is
performed as described above and once the new position is
reached, the system must keep SCL LOW while taking CS
HIGH. The new wiper position is maintained until changed
by the system or until a power-down/up cycle recalled the
previously stored data.
This procedure allows the system to always power-up to a
preset value stored in nonvolatile memory; then during
system operation minor adjustments could be made. The
adjustments might be based on user preference, system
parameter changes due to temperature drift, etc.
The state of U/D may be changed while CS remains LOW.
This allows the host system to enable the device and then
move the wiper up and down until the proper trim is attained.
The 2-wire interface is disabled while CS remains LOW.
*While in Standby, the 2-wire interface is enabled
TABLE 1. DCP SELECTION FOR UP/DOWN CONTROL
DS1
DS0
SELECTED WIPER
CONTROL REGISTER
0
Wiper A of DCP0
1
Wiper B of DCP0
1
0
Wiper A of DCP1
0
1
Wiper B of DCP1
TABLE 2. MODE SELECTION FOR UP/DOWN CONTROL
CS
SCL
U/D
MODE
L
H
Wiper Up
L
Wiper Down
H
X
Store Wiper Position to nonvolatile
memory if WP pin is high. No store,
return to standby, if WP pin is low.
H
X
Standby*
L
X
No Store, Return to Standby
L
H
Wiper Up (not recommended)
L
Wiper Down (not recommended)
X9455
相关PDF资料 |
PDF描述 |
|---|---|
| X9261TS24Z | IC POT DGTL DUAL 100K OHM 24SOIC |
| VE-2NP-MW-S | CONVERTER MOD DC/DC 13.8V 100W |
| VE-270-MY-F2 | CONVERTER MOD DC/DC 5V 50W |
| X9279UV14Z-2.7T1 | IC POT DGTL SGL 50K OHM 14-TSSOP |
| VE-2NN-MW-S | CONVERTER MOD DC/DC 18.5V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9455YS24I-2.7 | 功能描述:IC XDCP DUAL 256TAP 2.8K 24-SOIC RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:32 电阻（欧姆）:50k 电路数:1 温度系数:标准值 50 ppm/°C 存储器类型:易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 供应商设备封装:TSOT-23-6 包装:带卷 (TR) |
| X9455YV24-2.7 | 功能描述:IC DCP DUAL 2K 256TAP 24-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 标准包装:2,500 系列:XDCP™ 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C（设备位址） 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X9455YV24I-2.7 | 功能描述:IC DCP DUAL 2.8K 256TAP 24-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 标准包装:2,500 系列:XDCP™ 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C（设备位址） 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X9455YV24IZ-2.7 | 功能描述:IC XDCP DUAL 256TAP 2.8K 24TS RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:32 电阻（欧姆）:50k 电路数:1 温度系数:标准值 50 ppm/°C 存储器类型:易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 供应商设备封装:TSOT-23-6 包装:带卷 (TR) |
| X9460 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Audio Control Digitally Controlled Potentiometer |
发布紧急采购，3分钟左右您将得到回复。