参数资料
| 型号： | X9455WV24IZ-2.7 |
| 厂商： | Intersil |
| 文件页数： | 6/19页 |
| 文件大小： | 0K |
| 描述： | IC POT DUAL 2WIPER 10K 24-TSSOP |
| 标准包装： | 62 |
| 系列： | XDCP™ |
| 接片： | 256 |
| 电阻（欧姆）： | 10k |
| 电路数： | 2 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 9 线串行（芯片选择，设备位址，动触点位址） |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 管件 |
14
FN8202.1
July 28, 2006
All other address bits in the address byte must be set to “0”
during 2-wire write operations and their value should be
ignored when read.
Byte Write Operation
For any Byte Write operation, the X9455 requires the Slave
Address byte, an Address Byte, and a Data Byte (See Figure
7). After each of them, the X9455 responds with an ACK.
The master then terminates the transfer by generating a
STOP condition. At this time, if the write operation is to a
volatile register (WCR, or SR), the X9455 is ready for the
next read or write operation. If the write operation is to a
nonvolatile register (DR), and the WP pin is high, the X9455
begins the internal write cycle to the nonvolatile memory.
During the internal nonvolatile write cycle, the X9455 does
not respond to any requests from the master. The SDA
output is at high impedance.
The SR bits and WP pin determine the register being
accessed through the 2-wire interface. See Table 2 on page
9.
As noted before, any write operation to a Data Register
(DR), also transfers the contents of all the data registers in
that row to their corresponding WCR.
For example, to write 3Ahex to the Level 1 Data Register of
wiper 1A (DR1A1) the following sequence is required:
During the sequence of this example, WP pin must be high,
and A0, A1, and A2 pins must be low. When completed, the
DR1A1 register and the WCR1A of Wiper 1A will be set to
3Ah, and the other data registers in Row 1 will transfer their
contents to the respective WCRs.
S
t
a
r
t
S
t
o
p
Slave
Address
Status Register
Address
Data
A
C
K
A
C
K
Signal at SDA
Signals from
the Slave
Signals from
the Master
0
A
C
K
If bit 0 of data byte = 1,
DR contents move to WCR
during this ACK period
01 0 1
0 0 0 0 0 1 1 1
0 0 0 0 0 x x 1
DR select
FIGURE 6. STATUS REGISTER WRITE (USES STANDARD BYTE WRITE SEQUENCE TO SET UP ACCESS TO A DATA REGISTER)
TABLE 4. ADDRESSING FOR 2-WIRE INTERFACE ADDRESS
BYTE
ADDRESS (HEX)
CONTENTS
0
Wiper 0A
1
Wiper 1B
2
Wiper 1A
3
Wiper 0B
4
Not Used
5
Not Used
6
Not Used
7
Status Register
START
Slave Address
0101 0000
ACK
Address Byte
0000 0111
ACK
Data Byte
0000 0011
ACK
(note: at this ACK, the WCRs are all updated with their
respective DR.)
STOP
START
Slave Address
0101 0000
ACK
Address Byte
0000 0010
ACK
Data Byte
0011 1010
ACK
STOP
(Hardware Address = 000,
and a Write command)
(Indicates Status Register
address)
(Data Register Level 1 and
NVEnable selected)
(Hardware address = 000,
(Access Wiper 1A)
(Write Data Byte 3Ah)
Write command)
X9455
相关PDF资料 |
PDF描述 |
|---|---|
| X9261TS24Z | IC POT DGTL DUAL 100K OHM 24SOIC |
| VE-2NP-MW-S | CONVERTER MOD DC/DC 13.8V 100W |
| VE-270-MY-F2 | CONVERTER MOD DC/DC 5V 50W |
| X9279UV14Z-2.7T1 | IC POT DGTL SGL 50K OHM 14-TSSOP |
| VE-2NN-MW-S | CONVERTER MOD DC/DC 18.5V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9455YS24I-2.7 | 功能描述:IC XDCP DUAL 256TAP 2.8K 24-SOIC RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:32 电阻（欧姆）:50k 电路数:1 温度系数:标准值 50 ppm/°C 存储器类型:易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 供应商设备封装:TSOT-23-6 包装:带卷 (TR) |
| X9455YV24-2.7 | 功能描述:IC DCP DUAL 2K 256TAP 24-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 标准包装:2,500 系列:XDCP™ 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C（设备位址） 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X9455YV24I-2.7 | 功能描述:IC DCP DUAL 2.8K 256TAP 24-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 标准包装:2,500 系列:XDCP™ 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C（设备位址） 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X9455YV24IZ-2.7 | 功能描述:IC XDCP DUAL 256TAP 2.8K 24TS RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:32 电阻（欧姆）:50k 电路数:1 温度系数:标准值 50 ppm/°C 存储器类型:易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 供应商设备封装:TSOT-23-6 包装:带卷 (TR) |
| X9460 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Audio Control Digitally Controlled Potentiometer |
发布紧急采购，3分钟左右您将得到回复。