参数资料
| 型号： | XC4013E-2BG225I |
| 厂商： | Xilinx Inc |
| 文件页数： | 39/68页 |
| 文件大小： | 0K |
| 描述： | IC FPGA I-TEMP 5V 2SPD 225-PBGA |
| 产品变化通告： | Product Discontinuation 28/Jul/2010 |
| 标准包装： | 1 |
| 系列： | XC4000E/X |
| LAB/CLB数： | 576 |
| 逻辑元件/单元数： | 1368 |
| RAM 位总计： | 18432 |
| 输入/输出数： | 192 |
| 门数： | 13000 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 工作温度： | -40°C ~ 100°C |
| 封装/外壳： | 225-BBGA |
| 供应商设备封装： | 225-PBGA |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页当前第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页
R
XC4000E and XC4000X Series Field Programmable Gate Arrays
6-48
May 14, 1999 (Version 1.6)
Setting CCLK Frequency
For Master modes, CCLK can be generated in either of two
frequencies. In the default slow mode, the frequency
ranges from 0.5 MHz to 1.25 MHz for XC4000E and
XC4000EX devices and from 0.6 MHz to 1.8 MHz for
XC4000XL devices. In fast CCLK mode, the frequency
ranges from 4 MHz to 10 MHz for XC4000E/EX devices and
from 5 MHz to 15 MHz for XC4000XL devices. The fre-
quency is selected by an option when running the bitstream
generation software. If an XC4000 Series Master is driving
an XC3000- or XC2000-family slave, slow CCLK mode
must be used. In addition, an XC4000XL device driving a
XC4000E or XC4000EX should use slow mode. Slow mode
is the default.
Table 19: XC4000 Series Data Stream Formats
Data Stream Format
The data stream (“bitstream”) format is identical for all con-
guration modes.
The data stream formats are shown in Table 19. Bit-serial
data is read from left to right, and byte-parallel data is effec-
tively assembled from this serial bitstream, with the rst bit
in each byte assigned to D0.
The conguration data stream begins with a string of eight
ones, a preamble code, followed by a 24-bit length count
and a separator eld of ones. This header is followed by the
actual conguration data in frames. The length and number
of frames depends on the device type (see Table 20 and
Table 21). Each frame begins with a start eld and ends
with an error check. A postamble code is required to signal
the end of data for a single device. In all cases, additional
start-up bytes of data are required to provide four clocks for
the startup sequence at the end of conguration. Long
daisy chains require additional startup bytes to shift the last
data through the chain. All startup bytes are don’t-cares;
these bytes are not included in bitstreams created by the
Xilinx software.
A selection of CRC or non-CRC error checking is allowed
by the bitstream generation software. The non-CRC error
checking tests for a designated end-of-frame eld for each
frame. For CRC error checking, the software calculates a
running CRC and inserts a unique four-bit partial check at
the end of each frame. The 11-bit CRC check of the last
frame of an FPGA includes the last seven data bits.
Detection of an error results in the suspension of data load-
ing and the pulling down of the INIT pin. In Master modes,
CCLK and address signals continue to operate externally.
The user must detect INIT and initialize a new conguration
by pulsing the PROGRAM pin Low or cycling Vcc.
Data Type
All Other
Modes (D0...)
Fill Byte
11111111b
Preamble Code
0010b
Length Count
COUNT(23:0)
Fill Bits
1111b
Start Field
0b
Data Frame
DATA(n-1:0)
CRC or Constant
Field Check
xxxx (CRC)
or 0110b
Extend Write Cycle
—
Postamble
01111111b
Start-Up Bytes
xxh
Legend:
Not shaded
Once per bitstream
Light
Once per data frame
Dark
Once per device
Product Obsolete or Under Obsolescence
相关PDF资料 |
PDF描述 |
|---|---|
| XC4013E-2BG225C | IC FPGA C-TEMP 5V 2SPD 225-PBGA |
| 485897-2 | CONN PLUG 4POS HOUSING W/DETENT |
| 1-487769-3 | 015 HOUSING FFC RCPT 100CL SR |
| IDT71V546XS100PFG | IC SRAM 4MBIT 100MHZ 100TQFP |
| 487769-4 | CONN RECEPT 6 POS .100 SLIMLINE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XC4013E-2BG240C | 制造商:XILINX 制造商全称:XILINX 功能描述:Programmable Gate Arrays |
| XC4013E-2BG240I | 制造商:XILINX 制造商全称:XILINX 功能描述:Programmable Gate Arrays |
| XC4013E-2BG240M | 制造商:XILINX 制造商全称:XILINX 功能描述:Programmable Gate Arrays |
| XC4013E-2CB240C | 制造商:XILINX 制造商全称:XILINX 功能描述:Programmable Gate Arrays |
| XC4013E-2CB240I | 制造商:XILINX 制造商全称:XILINX 功能描述:Programmable Gate Arrays |
发布紧急采购，3分钟左右您将得到回复。