参数资料
型号: XD-14592F5-554Q
厂商: DATA DEVICE CORP
元件分类: 位置变换器
英文描述: SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36
封装: CERAMIC, FP-36
文件页数: 15/16页
文件大小: 150K
代理商: XD-14592F5-554Q
8
Data Device Corporation
www.ddc-web.com
SD-14590/91/92
D-02/02-250
be critically damped. FIGURE 8 shows the response to a step
input.
After initial slewing at the maximum tracking rate of the convert-
er, there is one overshoot (which is inherent in a Type II servo).
The overshoot settling to final value is a function of the small sig-
nal settling time. For Velocity output, the simple filter shown in
FIGURE 9 will eliminate the one overshoot for step velocity input
and will filter the carrier frequency ripple.
ANALOG OUTPUTS
The analog outputs are velocity (VEL) and AC error (e). Both out-
puts can swing ±3.5 V min. with respect to V.
The AC error, e, is proportional to the error (
θ - φ) with a scaling
of 6.310 mV/LSB (14-bit mode), and 3.125 mV/LSB (16-bit
mode). Velocity output characteristics are listed in TABLE 4.
STANDARD
PARAMETER
UNITS
TABLE 4. VELOCITY CHARACTERISTICS
Polarity
Output Voltage
Voltage Scaling
Scale Factor
Scale Factor TC
Reversal Error
Reversal Error TC
Linearity
Linearity TC
Zero Offset
Zero Offset TC
Load
V
RPS
%
PPM/°C
%
PPM/°C
% output
PPM/°C
mV
V/°C
k Ohm
Positive for increasing angle.
3.5
See Voltage Scaling Table 5.
10
15
100
200
12
25
50
12
25
50
15
35
25
50
3 min
TYP
MAX
RESOLUTION (VALUES IN RPS/VOLT)
BANDWIDTH
TABLE 5. VELOCITY VOLTAGE SCALING
HI
LO
2.8
0.71
0.17
Note: If the resolution is changed while the input is changing, then
the velocity output voltage and the digital output will have a transient
until it settles to the new velocity scaling at a speed determined by
the bandwidth. If additional information is required, consult the factory.
14
16
OVERSHOOT
SMALL SIGNAL
SETTLING TIME
MAX SLOPE EQUALS
TRACKING RATE
(SLEW RATE)
θ2
θ1
SETTLING TIME
FIGURE 8. RESPONSE TO A STEP INPUT
OUTPUT
91k
VEL
(pin 23)
0.1 F
RC = 1/A
FIGURE 9. VELOCITY FILTER
VELOCITY OUTPUT
The Velocity output (VEL) from the SD-14590 is a DC voltage
proportional to angular velocity d
θ/dt = dφ/dt. The velocity input is
the second integrator, as shown in FIGURE 6. Its linearity is
dependent solely on the linearity of the voltage controlled oscil-
lator (VCO). Due to the highly linearized VEL output, the electro-
mechanical tachometer can now be eliminated from motion con-
trol systems. Bandwidth (BW) and the acceleration constant (Ka)
can be determined from the formula shown:
BW(Hz) = BW(rad/sec)/2
π
Ka = A2
Outputs e and VEL are not required for normal operation of the
converter. V is used as an internal DC reference with the direct
input option. Maximum loading on V is 40k ohm; maximum load-
ing for e and VEL is 3k ohm. The velocity characteristics are
shown in TABLES 4 and 5. Output e is not closely controlled or
characterized. Consult the factory for further information.
相关PDF资料
PDF描述
XD-14592F5-585 SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36
XD-14590F4-214L SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36
XD-14592F4-284L SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36
XD-14591F4-504Q SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36
XD-14591F4-524Q SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, CDMA36
相关代理商/技术参数
参数描述
XD-14595D4-102 制造商:未知厂家 制造商全称:未知厂家 功能描述:Resolver/Synchro-to-Digital Converter
XD-14595D4-104 制造商:未知厂家 制造商全称:未知厂家 功能描述:Resolver/Synchro-to-Digital Converter
XD-14595D4-105 制造商:未知厂家 制造商全称:未知厂家 功能描述:Resolver/Synchro-to-Digital Converter
XD-14595D4-112 制造商:未知厂家 制造商全称:未知厂家 功能描述:Resolver/Synchro-to-Digital Converter
XD-14595D4-114 制造商:未知厂家 制造商全称:未知厂家 功能描述:Resolver/Synchro-to-Digital Converter