- 您现在的位置：买卖IC网 > PDF目录6095 > XN2D-4471 (Omron Electronics Inc-EMC Div)CONNECTOR SKT QUAD 4POS ECON PCB PDF资料下载
参数资料
| 型号： | XN2D-4471 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | CONNECTOR SKT QUAD 4POS ECON PCB |
| 产品培训模块： | Medical Solutions |
| 标准包装： | 54 |
| 系列： | XN2 |
| 连接器类型： | 插座 |
| 触点类型：： | 母形插口 |
| 位置数： | 16 |
| 加载位置的数目： | 全部 |
| 间距： | 0.079"（2.00mm） |
| 行数： | 4 |
| 行间距： | 0.256"（6.50mm） |
| 安装类型： | 通孔 |
| 端子： | 压配式 |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 8µin（0.20µm） |
| 颜色： | 黑 |
| 包装： | 散装 |
| 产品目录页面： | 2821 (CN2011-ZH PDF) |
| 配套产品： | OR1021-ND - CONNECTOR PLUG 4POS ECON |
| 其它名称： | OR1031 XN2D4471 |
Assembly Instructions
Preparing the Cable
Align the cable with the guide marked STRIP GAUGE on the side of
the Connector, strip 7 to 8 mm of the cable sheath, and then twist the
wires several times.
4. Make sure that the following operations have been performed.
? Check that the operating lever is reset.
? Check that the procedure in step 2 has been followed. (Pull
gently on the cable to make sure that there is resistance, indicat-
ing that the Connectors are wired correctly.)
7 to 8 mm
Connecting the Cable to the Connector
1. Use a flat-blade screwdriver to push down the operating lever
inside the operation slot until it locks.
Flat-blade
screwdriver
Operation slot
2. Insert the wire fully to the back of the wire insertion hole. Make
sure that the cable sheath is inserted into the hole, and that the
end of the wire has passed through the contact section.
Removing Cables from the Connector
1. Press down on the operating lever to lock the lever before remov-
ing the cable.
Contact
section
Cable sheath
Wire insertion
hole
2. After removing the cable from the Connector, always reset the
operating lever, except when rewiring the Connector. The Con-
nector can be rewired without resetting the operating lever.
Operatin g lever
(white)
3. Insert the screwdriver into the release slot, and gently pull back
the lever until a click is heard by resetting the lever.
Operatin g lever
(white)
Release slot
184
Easy-wire connectors for Industrial Components
XN2
相关PDF资料 |
PDF描述 |
|---|---|
| SMBJ30CA | TVS BIDIRECT 600W 30V SMB |
| 966262-6702-AR | CONN SOCKET DL ENTRY 62POS GOLD |
| 960258-7102-AR | CONN SOCKET DUAL R/A 58POS GOLD |
| 302-R501 | CONN HEADER R/A 50POS GOLD |
| 950472-6102-AR | CONN SOCKET 72POS 2MM VERT PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XN300 | 制造商:Apex Tool Group 功能描述:5 5/8 IN. PRECISION CARVING KNIFE |
| XN30E610003 | 制造商:SPC Multicomp 功能描述:BACKSHELL, D-SUB, DA, ZINC; Series:-; D Sub Shell Size:DA; Connector Body Material:Zinc; Cable Exit Angle:90 |
| XN3321 | 制造商:OHIO BUCKEYE 功能描述: |
| XN4110 | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Silicon PNP epitaxial planar type |
| XN4111 | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Silicon PNP epitaxial planar type |
发布紧急采购，3分钟左右您将得到回复。