- 您现在的位置：买卖IC网 > PDF目录6095 > XN2D-4471 (Omron Electronics Inc-EMC Div)CONNECTOR SKT QUAD 4POS ECON PCB PDF资料下载
参数资料
| 型号： | XN2D-4471 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 5/6页 |
| 文件大小： | 0K |
| 描述： | CONNECTOR SKT QUAD 4POS ECON PCB |
| 产品培训模块： | Medical Solutions |
| 标准包装： | 54 |
| 系列： | XN2 |
| 连接器类型： | 插座 |
| 触点类型：： | 母形插口 |
| 位置数： | 16 |
| 加载位置的数目： | 全部 |
| 间距： | 0.079"（2.00mm） |
| 行数： | 4 |
| 行间距： | 0.256"（6.50mm） |
| 安装类型： | 通孔 |
| 端子： | 压配式 |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 8µin（0.20µm） |
| 颜色： | 黑 |
| 包装： | 散装 |
| 产品目录页面： | 2821 (CN2011-ZH PDF) |
| 配套产品： | OR1021-ND - CONNECTOR PLUG 4POS ECON |
| 其它名称： | OR1031 XN2D4471 |
Safety Precautions
■ General Precautions
? Do not pull on the Connectors or cables. Doing so may cause dam-
age to the Connectors or cause the cables to disconnect.
? Install the Connectors in a location where they will not be stepped
on, to prevent disconnection of the cables or damage to the Con-
nectors. If the Connectors have to be installed in such a location,
use a protective cover.
? Make sure that the Connectors are mated in the correct direction.
Mating the Connectors incorrectly will damage to the Connectors.
? Do not use the Connectors if the lock lever is bent or broken. Doing
so may cause the Connector to become loose or the device to mal-
function.
? Before mounting Connectors to a PCB, make sure that the Connec-
tors are positioned in the correct direction.
? Before bending a cable to connect it to a Connector, check the
bending specifications of the cable to be used.
? Do not exceed the rated current of the cable. Always check the
rated current of each cable to be used.
? Do not use pliers or other tools to remove the Connectors.
? Hold the Connectors firmly by hand when handling them. Do not
use excessive force to push the Connectors. Forcing the Connec-
tors may result in injury.
? These Connectors do not resist water. Do not use Connectors in
places where water or oil may be sprayed onto the Connectors.
■ Precautions for Correct Use
Wiring
? Insert one wire into each insertion hole. Inserting two or more wires
into a single hole may cause unexpected problems.
? Make sure that no power is being supplied to a Connector before
wiring, inserting, or removing the Connector. Doing so may result in
electric shock.
? Follow the wiring diagrams for the device being used when wiring
the cables.
? Strip the cables according to the instructions in the applicable oper-
ation manual, making sure not to damage the wires.
? Do not use a screwdriver with a tip larger than the specified width
when wiring the Connectors.
? Make sure short-circuits are not created, e.g., by protruding wires.
Inserting and Removing Connectors
? When connecting or disconnecting Connectors, always hold the
case of the Connector.
? When mating Connectors, insert the Connector fully into the back
of the socket, and then make sure that the Connector will not
become loose by lightly pulling it in the opposite direction.
Recommended Screwdriver
? Use a flat-blade screwdriver with a tip of 2 mm max. Do not use
screwdrivers that gradually widen towards the base of the screw-
driver.
? Using other screwdrivers may cause damage to the adjacent poles.
Easy-wire connectors for Industrial Components
XN2
185
相关PDF资料 |
PDF描述 |
|---|---|
| SMBJ30CA | TVS BIDIRECT 600W 30V SMB |
| 966262-6702-AR | CONN SOCKET DL ENTRY 62POS GOLD |
| 960258-7102-AR | CONN SOCKET DUAL R/A 58POS GOLD |
| 302-R501 | CONN HEADER R/A 50POS GOLD |
| 950472-6102-AR | CONN SOCKET 72POS 2MM VERT PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XN300 | 制造商:Apex Tool Group 功能描述:5 5/8 IN. PRECISION CARVING KNIFE |
| XN30E610003 | 制造商:SPC Multicomp 功能描述:BACKSHELL, D-SUB, DA, ZINC; Series:-; D Sub Shell Size:DA; Connector Body Material:Zinc; Cable Exit Angle:90 |
| XN3321 | 制造商:OHIO BUCKEYE 功能描述: |
| XN4110 | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Silicon PNP epitaxial planar type |
| XN4111 | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Silicon PNP epitaxial planar type |
发布紧急采购，3分钟左右您将得到回复。