参数资料
型号: XR17V358IB-0A-EVB
厂商: Exar Corporation
文件页数: 57/68页
文件大小: 0K
描述: EVAL BOARD FOR XR17V358
产品培训模块: PCIe UARTs
UART Product Overview
标准包装: 1
主要目的: 接口,UART
嵌入式:
已用 IC / 零件: XR17V358
已供物品:
相关产品: 1016-1294-ND - IC UART PCIE OCTAL 176FPBGA
其它名称: 1016-1293
XR17V358
60
HIGH PERFORMANCE OCTAL PCI EXPRESS UART
REV. 1.0.4
MSR [2]: Receiver Disable
This bit can be used to disable the receiver by halting the Receive Shift Register (RSR). When this bit is set to
a logic 1, the receiver will operate in one of the following ways:
If a character is being received at the time of setting this bit, that character will be correctly received. No
more characters will be received.
If the receiver is idle at the time of setting this bit, no more characters will be received.
The receiver can be enabled and will start receiving characters by resetting this bit to a logic 0. The receiver
will operate in one of the following ways:
If the receiver is idle (RX pin is HIGH) at the time of setting this bit, the next character will be received
normally. It is recommended that the receiver be idle when resetting this bit to a logic 0.
If the receiver is not idle (RX pin is toggling) at the time of setting this bit, the RX FIFO will be filled with
unknown data.
Any data that is in the RX FIFO can be read out at any time whether the receiver is disabled or not.
Logic 0 = Enable Receiver (default).
Logic 1 = Disable Receiver.
MSR [1]: Transmitter Disable Modes
This bit is only applicable when MSR[3] = 1.
Logic 0 = No xon/xoff software flow control characters will be transmitted when the transmitter is disabled. If
there is a pending xon/xoff character to be sent while the transmitter is disabled, it will be transmitted. No
additional xon/xoff characters will be sent.
Logic 1 = Xon/xoff software flow control characters will be transmitted even though the transmitter is
disabled.
MSR[0]: Receiver Disable Modes
This is only applicable when MSR[2] = 1.
Logic 0 = All RX data and xon/xoff flow control characters are ignored.
Logic 1 = All RX data is ignored. Xon/xoff flow control characters are detected and acted upon.
4.12
SCRATCH PAD REGISTER (SPR) - Read/Write
This is a 8-bit general purpose register for the user to store temporary data. The content of this register is
preserved during sleep mode but becomes 0xFF (default) after a reset or a power off-on cycle.
4.13
FEATURE CONTROL REGISTER (FCTR) - Read/Write
This register controls the UART enhanced functions that are not available on ST16C554 or ST16C654.
FCTR[7:6]: TX and RX FIFO Trigger Table Select
These 2 bits select the transmit and receive FIFO trigger level table A, B, C or D. When table A, B, or C is
selected the auto RTS flow control trigger level is set to "next FIFO trigger level" for compatibility to ST16C550
and ST16C650 series. RTS/DTR# triggers on the next level of the RX FIFO trigger level, in another word, one
FIFO level above and one FIFO level below. See in Table 16 for complete selection with FCR bit [5:4] and
FCTR bits [7:6], i.e. if Table C is used on the receiver with RX FIFO trigger level set to 56 bytes, RTS/DTR#
output will de-assert at 60 and re-assert at 16.
相关PDF资料
PDF描述
V24C3V3T50B2 CONVERTER MOD DC/DC 3.3V 50W
50YXG56MEFC6.3X11 CAP ALUM 56UF 50V 20% RADIAL
03SSR-32E51 CABLE ASSY 51MM 3POS 03SSR-32H
AD9954/PCBZ BOARD EVAL FOR 9954
400PX1MEFC6.3X11 CAP ALUM 1UF 400V 20% RADIAL
相关代理商/技术参数
参数描述
XR17V358IB176-F 功能描述:UART 接口集成电路 8 Channel PCIe UART w/256 Byte FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
XR17V358IB176-F 制造商:Exar Corporation 功能描述:IC OCTAL UART 25MBPS 3.6V 176-BGA
XR17V358IB-E4-EVB 功能描述:界面开发工具 Eval Board for XR17V358IB-E4 RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
XR17V358IB-E8-EVB 功能描述:界面开发工具 Eval Board for XR17V358IB-E8 RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
XR1857SN 制造商:Electro-Term/Hollingsworth 功能描述: