- 您现在的位置：买卖IC网 > PDF目录16990 > XRD9818EVAL (Exar Corporation)EVAL BOARD FOR XRD9818 PDF资料下载
参数资料
| 型号： | XRD9818EVAL |
| 厂商： | Exar Corporation |
| 文件页数： | 28/28页 |
| 文件大小： | 0K |
| 描述： | EVAL BOARD FOR XRD9818 |
| 标准包装： | 1 |
| 系列： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页当前第28页
xr
xr
XRD9818
3-CHANNEL 16-BIT LINEAR CCD/CIS SENSOR SIGNAL PROCESSOR
REV. 1.0.1
9
PRODUCT DESCRIPTION
1.0
INTRODUCTION
The XRD9818 contains all of the circuitry required to create a complete 3-channel signal processor/digitizer for
use in CCD/CIS imaging systems.
It can be configured to operate in a 3-CH rotating (RGB), 2-CH rotating
(RG, GR, GB or BR), or a 1-CH fixed (R, G or B) mode.
Each channel includes a correlated-double-sampler/sample-hold (CDS/SH), channel offset adjustment and
programmable gain amplifier (PGA). After signal conditioning the channel outputs are multiplexed and digitized
by a 16-bit A/D converter.
The XRD9818 has selectable 8-bit (byte) or 4-bit (nibble) data output modes. The ADCLK runs up to 12MHz in
the 8-bit data output mode or 24MHz in the 4-bit data output mode.
In order to maximize flexibility, the specific operating mode is programmable through internal configuration
registers. In addition, the offset and gain of each channel can be independently programmed through separate
offset and gain registers. The configuration, offset and gain register information is loaded through a 3-pin serial
interface.
2.0
MODES OF OPERATION
2.1
3-CH CCD Mode
In 3-CH mode the XRD9818 simultaneously samples the red, green and blue channel inputs. The CDS
extracts the video information which corresponds to the difference between the sample black reference and
video level for each pixel. The black reference level is sampled on the falling edge of BSAMP and the video
level is sampled on the falling edge of VSAMP. This information is then level shifted and gained up according to
the contents of the Offset and PGA registers respectively. The data is then sequentially converted (Red
→
Green
→ Blue) by a 16-bit A/D converter.
In CCD mode, each channel input is sampled with respect to the CMN- input. This provides a sudo-differential
input. Typically the CMN- input is connected to the CCD ground through a capacitor. This coupling capacitor
should be at least 3 times the capacitor value used to couple the RED+, GRN+ and BLU+ inputs.
The timing for this mode is shown in Figure 15.
2.2
2-CH CCD Mode
The 2-CH mode operates identically to the 3-CH CCD mode except that only 2 channels are actively used to
process CCD output signals. The two channels to be used and the order in which they process data is
determined from the configuration of the Input-Mux/Channel-Select bits (CH[2:0]) located in the Mode 1
register. There are four possible 2-CH configurations, RG, GR, GB and BR. To conserve power that channel
not being utilized is powered down.
The timing for this mode is shown in Figure 16.
2.3
1-CH CCD Mode
The 1-CH mode operates identically to the 3-CH or 2-CH CCD modes except that the channel sampled is fixed
to only one input. The channel selection is set by the Input-Mux/Channel-Select bits (CH[2:0]) located in the
Mode 1 register. There are three possible one channel modes: R, G or B. The channels not being used will be
powered down to conserve power.
The timing for this mode is shown in Figure 17.
相关PDF资料 |
PDF描述 |
|---|---|
| 812841-000 | BOOT MOLDED |
| 380LX332M100K042 | CAP ALUM 3300UF 100V 20% SNAP |
| SRU8043-150Y | INDUCTOR PWR 15UH 30% SHIELD SMD |
| PM3308-220M-RC | INDUCTOR POWER 22UH 1.3A SMD |
| 222A132-4-0 | BOOT MOLDED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XRD9820 | 制造商:EXAR 制造商全称:EXAR 功能描述:3-Channel, 10/12-Bit Linear CCd and CIS Sensor signal Processors |
| XRD9822 | 制造商:EXAR 制造商全称:EXAR 功能描述:3-Channel, 10/12-Bit Linear CCd and CIS Sensor signal Processors |
| XRD9824 | 制造商:EXAR 制造商全称:EXAR 功能描述:14-Bit Linear CIS/CCD Sensor Signal Processor with Serial Control |
| XRD9824ACD | 制造商:EXAR 制造商全称:EXAR 功能描述:14-Bit Linear CIS/CCD Sensor Signal Processor with Serial Control |
| XRD9824ACD-F | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。