参数资料
型号: XRT75R03IVTR
厂商: Exar Corporation
文件页数: 4/92页
文件大小: 0K
描述: IC LIU E3/DS3/STS-1 3CH 128LQFP
标准包装: 750
类型: 线路接口装置(LIU)
驱动器/接收器数: 3/3
规程: DS3,E3,STS-1
电源电压: 3.135 V ~ 3.465 V
安装类型: 表面贴装
封装/外壳: 128-LQFP
供应商设备封装: 128-LQFP(14x20)
包装: 带卷 (TR)
XRT75R03
xr
REV. 1.0.8
THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
9
31
6
17
MTIP_0
MTIP_1
MTIP_2
I
Monitor Tip Input - Positive Polarity Signal - Channel 0:
Monitor Tip Input - Positive Polarity Signal - Channel 1:
Monitor Tip Input - Positive Polarity Signal - Channel 2:
These input pins along with MRING_n function as the Transmit Drive Monitor
Output (DMO) input monitoring pins. To (1) monitor the Transmit Output line
signal and (2) to perform this monitoring externally, then this pin MUST be con-
nected to the corresponding TTIP_n output pin via a 274 ohm series resistor.
Similarly, the MRING_n input pin MUST also be connected to its corresponding
TRING_n output pin via a 274 ohm series resistor.
The MTIP_n and MRING_n input pins will continuously monitor the Transmit
Output line signal via the TTIP_n and TRING_n output pins for bipolar activity.
If these pins do not detect any bipolar activity for 128 bit periods, then the
Transmit Drive Monitor circuit will drive the corresponding DMO_n output pin
"High" in order to denote a possible fault condition in the Transmit Output Line
signal path.
NOTES:
1.
These input pins are inactive if the user choose to internally monitor
the Transmit Output line signal.
2.
Internal Monitoring is only available as an option if the XRT75R03 in is
being operated in the Host Mode.
32
5
16
MRing_0
MRing_1
MRing_2
I
Monitor Ring Input - Channel 0:
Monitor Ring Input - Channel 1:
Monitor Ring Input - Channel 2:
These input pins along with MTIP_n function as the Transmit Drive Monitor Out-
put (DMO) input monitoring pins. To (1) monitor the Transmit Output line signal
and (2) to perform this monitoring externally, then this input pin MUST be con-
nected to the corresponding TRING_n output pin via a 274 ohm series resistor.
Similarly, the MTIP_n input pin MUST be connected to its corresponding
TTIP_n output pin via a 274 ohm series resistor.
The MTIP_n and MRING_n input pins will continuously monitor the Transmit
Output line signal via the TTIP_n and TRING_n output pins for bipolar activity.
If these pins do not detect any bipolar activity for 128 bit periods, then the
Transmit Drive Monitor circuit will drive the corresponding DMO_n output pin
"High" to indicate a possible fault condition in the Transmit Output Line signal
path.
NOTES:
1.
These input pins are inactive if the user chooses to internally monitor
the Transmit Output line signal.
2.
Internal Monitoring is only available as an option if the XRT75R03 is
being operated in the Host Mode.
TRANSMIT LINE SIDE PINS
PIN #
SIGNAL NAME
TYPE
DESCRIPTION
相关PDF资料
PDF描述
MS27472T10B35SB CONN RCPT 13POS WALL MNT W/SCKT
VE-21W-MX-F3 CONVERTER MOD DC/DC 5.5V 75W
XRT75L00DIV IC LIU E3/DS3/STS-1 SGL 52TQFP
MS27466T11B98SA CONN RCPT 6POS WALL MT W/SCKT
MS27466E15A15S CONN RCPT 15POS WALL MT W/SCKT
相关代理商/技术参数
参数描述
XRT75R03IVTR-F 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
XRT75R06 制造商:EXAR 制造商全称:EXAR 功能描述:SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75R06D 制造商:EXAR 制造商全称:EXAR 功能描述:SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
XRT75R06DES 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
XRT75R06DIB 功能描述:网络控制器与处理器 IC 6CH E3/DS3/STS1 LIU w/DeSynch RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray