- 您现在的位置：买卖IC网 > PDF目录7198 > Y92BA100 (Omron Electronics Inc-IA Div)HEAT SINK FOR 10A G3NA SERIES PDF资料下载
参数资料
| 型号： | Y92BA100 |
| 厂商： | Omron Electronics Inc-IA Div |
| 文件页数： | 14/18页 |
| 文件大小： | 0K |
| 描述： | HEAT SINK FOR 10A G3NA SERIES |
| 产品目录绘图： | Y92B Series Heat Sink |
| 标准包装： | 1 |
| 系列： | G3NA |
| 附件类型： | 散热片 |
| 适用于相关产品： | G3NA 系列 |
| 产品目录页面： | 2638 (CN2011-ZH PDF) |
| 配用： | Z1237-ND - RELAY SSR 1A 24VDC SIP PC MNT Z1236-ND - RELAY SSR 1A 12VDC SIP PC MNT Z1235-ND - OUTPUT MODULE AC QC 15MA 5-24VDC Z1234-ND - INPUT MODULE AC 15MA 4-32VDC Z1047-ND - RELAY SSR SPST 150MA 6-SMT Z1046-ND - RELAY SSR SPST 150MA 4-SMT Z1045-ND - RELAY SSR SPST 150MA 6-DIP Z1044-ND - RELAY SSR SPST 150MA 4-DIP Z1043-ND - RELAY SSR DPST 120MA 8-SMT Z1042-ND - RELAY SSR DPST 120MA 8-DIP 更多... |
| 其它名称： | Y92B-A100 Z927 |
High-capacity Heat Sink
(Y92B-P250NF)
Ratings and Characteristics of High-
capacity Heat Sink (Y92B-P250NF)
DIN-track Mounting
? Assembled DIN Tracks are heavy. Mount the DIN Tracks securely.
Be sure that the Heat Sink is securely locked to the DIN Track.
? Attach End Plates (PFP-M, order separately) to both ends of the
Units on the DIN Track to hold them in place.
? To mount a Heat Sink to a DIN Track, press down at the point indi-
cated by arrow 1 in the diagram and then press in the Heat Sink at
the point indicated by arrow 2.
Fan Ratings
Rated voltage
Operating voltage
Frequency
Rated current
(See note.)
Rated speed
(See note.)
200 V
85% to 110% of rated voltage
50/60 Hz
0.061 A at 50 Hz
0.052 A at 60 Hz
2,600 r/min at 50 Hz
3,050 r/min at 60 Hz
Note: Average values.
Thermostat Ratings
Operating temperature
Contact ratings
Approx. 90 ° C
3 A at 240 VAC or 24 VDC, resistive load
Vertical
Fan/Thermostat Characteristics
Motor type
Terminal type
Single-phase shading coil induction motor
(2-pole, open type)
Terminals
Applicable DIN Track
Mounting is possible on TE35-15Fe (IEC 60715) DIN tracks. DIN
tracks from the following manufacturers can be used.
Insulation class
Insulation
resistance
IEC class B (130 ° C)
UL class A (105 ° C)
CSA class A (105 ° C)
100 M Ω min. (at 500 VDC) between all power
supply connections and uncharged metal parts.
Manufacturer
Schneider
WAGO
PHOENIX
Thickness: 1.5 mm
AM1-DE2000
210-114 or 210-197
N35/15
Thickness: 2.3 mm
---
210-118
N35/15/15-2.3
Insulation withstand 2,000 VAC (1 minute) between all power sup-
voltage ply connections and uncharged metal parts.
Amb. operating temp. ? 30 to 70 ° C (no icing)
Amb. storage temp. ? 40 to 85 ° C (no icing)
Ambient humidity 25 to 85%
Direct Mounting
? Prepare mounting holes as shown in the diagram. Tightening
torque: 0.98 to 1.47 N ? m
64 ± 0.3
Protection
Materials
Bearings
Weight
Compliant standards
Certified standards
Impedance protection
Frame: Die-cast aluminum
Blades: Glass polycarbonate
Ball bearings
Approx. 300 g
PSE, EN/IEC 60335 (CE marking compli-
ant)
UL/CSA (pending)
130 ± 0.3
Fo u r, 4.5 dia. or M4 holes
? When mounting a Heat Sink directly, first remove the Fan Unit, then
mount the Heat Sink by itself before attaching the Fan Unit again.
(Remove the two screws shown in the following diagram.)
? Use a commercial power supply (50/60 Hz) for the Fan.
? Be sure to turn OFF the power supply and wait for the blades to
stop before inspecting the Fan.
? High-precision ball bearings are used in the fan and these may be
damaged if the Fan is dropped or otherwise subjected to shock.
The life and characteristics of the Fan will be reduced if the bear-
ings are damaged. Do not subject the Fan to shock.
? The life of the Fan depends on the ambient temperature, As a
guideline, the Fan life is 40,000 hours for continuous usage at 40°C.
Remove scre w s
Fan Unit
? Be sure there are no objects near the air vents that would restrict
air flow and no loose objects, such as electrical lines.
? The Fan is an OMRON R87F-A4A-93HP (200 VAC) Fan. Use the
same model of Fan for replacement.
? The tightening torque of the mounting screw when replacing the
Fan is 0.44 N ? m.
? Terminals equivalent to Faston #110 are used for the Fan power
supply terminals.
Heat Sink
? First, temporarily mount the Heat Sink with the bottom two screws
? Refer to the following table for the OMRON Fan power supply plug
cables (order separately).
and then attach the top two screws with the mounting bracket sand-
wiched between the Heat Sink and mounting surface. Finally,
tighten all four screws.
Cable
length
1m
2m
UL certified
R87F-PC
R87F-PC-20
Complies with Electrical Appliance
and Material Safety Law (Japan)
R87F-PCJT
R87F-PCJT-20
? Connect the ground screw hole on the fan to PE.
482
Solid State Relay
G3NA
相关PDF资料 |
PDF描述 |
|---|---|
| 433115-13-0 | TERM BARRIER 13CIRC 1 ROW .4375 |
| 433110-13-0 | TERM BARRIER 13CIRC 1 ROW .4375 |
| MP-101635-2.5-8A | LABEL ID PRODUCT |
| MF-MSMF110/16-2 | PTC RESETTABLE 1.10A 16V 1812 |
| FOD410SDV | TRIAC DRV ZC 300MA 600V VDE 6SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| Y92B-A100 | 功能描述:散热片 STD MT HEAT SINK G3N RoHS:否 制造商:Ampro By ADLINK 产品:Heat Sink Accessories 安装风格:Through Hole 散热片材料: 散热片样式: 热阻: 长度: 宽度: 高度: 设计目的:Express-HRR |
| Y92BA150N | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:HEAT SINK FOR 25A G3NA SERIES 制造商:Omron Electronic Components LLC 功能描述:Heat Sink Passive 1.37|C/W 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Heat Sink Passive 1.37°C/W |
| Y92B-A150N | 功能描述:散热片 STD MT HEAT SINK G3N RoHS:否 制造商:Ampro By ADLINK 产品:Heat Sink Accessories 安装风格:Through Hole 散热片材料: 散热片样式: 热阻: 长度: 宽度: 高度: 设计目的:Express-HRR |
| Y92BA150NV | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:HEAT SINK FLUSH MOUNT FOR G3NA 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:HEAT SINK |
| Y92B-A150NV | 功能描述:散热片 HEAT SINK RoHS:否 制造商:Ampro By ADLINK 产品:Heat Sink Accessories 安装风格:Through Hole 散热片材料: 散热片样式: 热阻: 长度: 宽度: 高度: 设计目的:Express-HRR |
发布紧急采购，3分钟左右您将得到回复。