参数资料
| 型号： | 1-172341-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | CONN PLUG 12POS MINI-UMNL RED |
| RoHS指令信息： | 1-172341-2 Statement of Compliance |
| 3D 型号： | 1-172341-2.pdf |
| 标准包装： | 3,000 |
| 系列： | 迷你通用 MATE-N-LOK |
| 连接器类型： | 插头 |
| 触点类型：： | 公形或母形 |
| 位置数： | 12 |
| 间距： | 0.163"（4.14mm） |
| 行数： | 3 |
| 行间距： | 0.163"（4.14mm） |
| 安装类型： | 自由悬挂 |
| 触点终端： | 压接 |
| 紧固型： | 销锁 |
| 颜色： | 红 |
| 包装： | 散装 |
| 请注意： | 不提供触点 |
| 配套产品： | 1-794040-1-ND - CONN HEADER 12POS VERT MINI-UMNL 1-794040-0-ND - CONN HEADER 12POS VERT MINI-UMNL 794040-1-ND - CONN HEADER 12CIRC TIN A32466-ND - CONN HEADER 12POS VERT .163 GOLD A32465-ND - CONN HEADER 12POS VERT .163 TIN A25614-ND - CONN HEADER 12POS VERT .163 AU A25613-ND - CONN HEADER 12POS VERT .163 TIN |
| 相关产品： | A97685TR-ND - CONN PIN 22-26AWG MINI U MNL TIN A100828CT-ND - CONN SOCKET 20-16AWG M-UNML TIN A100436TR-ND - CONTACT PIN 16-20AWG MINI-UMNL 170365-4-ND - CONN SOCKET 22-26AWG MINI-UMNL A97689CT-ND - CONN SOCKET 18-22AWG GOLD CRIMP A97688CT-ND - CONN SOCKET 22-26AWG GOLD CRIMP A97687CT-ND - CONN SOCKET 22-26AWG TIN CRIMP A97686CT-ND - CONN PIN 18-22AWG M-U-MNL TIN A97675CT-ND - CONN PIN 22-26AWG M-U MNL GOLD A97678-ND - CONN SOCKET 22-26AWG GOLD CRIMP 更多... |
114-- 16017
SOLDERING PROCESS
MAXIMUM WAVE TEMPERATURE
CELSIUS FAHRENHEIT
TIME
(At Max Temperature)
Wave Soldering
260
500
5 Seconds
Figure 8
3.7. Mating and Unmating
A. Polarization
The connectors (excluding hermaphroditic) are fully polarized (ribs and slots) to provide proper mating
using a positive locking mechanism to prevent accidental disengagement of mated connectors.
B. Keying
Keying plugs provide additional polarization for mating connectors. The keying plug may be inserted into
the FRONT of the plug housing or cap housing.
C. Engagement
The mating connectors must have an identical number of circuit positions. Polarizing features must be
properly oriented. The connectors must be inserted straight toward each other until they bottom and the
positive locking latch and locking tab engage.
D. Disengagement
For panel--mounted and free--hanging connectors, the lock on the plug housing must be pinched and the
plug housing must be pulled straight out.
3.8. Strain Relief and Wire Dress
If required, wires can be bundled together and supported with cable ties. Wires must not be stretched or
confined in any way that would restrict the floating action of the contacts. Therefore, the wires must remain
perpendicular to the connector and avoid an excessively sharp bend radius. The minimum distance for the
cable tie, measured from the wire end of the connector to the cable tie, must be 76.2 [3.00].
3.9. Replacement and Repair
Damaged, worn, or improperly crimped contacts and damaged connectors must not be used. Such
components should be removed, discarded, and replaced with new components.
4. QUALIFICATION
Mini--Universal MATE--N--LOK connectors are Recognized by Underwriters Laboratories Inc. (UL) under File
E28476 and Certified by CSA International under File LR 7189.
5. TOOLING
Tooling for crimping, inserting, and extracting contacts is given in Figure 9.
5.1. Crimping Contacts
Strip--form contacts are designed to be crimped with a miniature applicator installed in a semi--automatic or
automatic machine. Loose--piece contacts are designed to be crimped with a hand crimping tool.
NOTE
i
AMP--O--LECTRIC Model “K” Terminating Machine 565435--5 can be used for terminating the contacts; however, it is
no longer being manufactured new. It has been superseded by AMP--O--LECTRIC Model “G” Terminating Machine
354500--1.
5.2. Contact Insertion and Extraction
An insertion tool is not usually required for inserting contacts into housings. However, an insertion tool is
available for inserting contacts crimped to small wire or when the wire bundle is too large for hand insertion.
An extraction tool is available for removing both pin and socket contacts from the housings.
10 of 12
Rev L
相关PDF资料 |
PDF描述 |
|---|---|
| CRA06S083100RFTA | RES ARRAY 100 OHM 4 RES 1206 |
| KBS-41DA-2A | BUZZER PIEZO ELEMENT 2KHZ 41MM |
| CRA06P0831K00FTA | RES ARRAY 1K OHM 4 RES 1206 |
| KBS-35DA-3G | BUZZR PIEZO ELEMENT 2.6KHZ 35MM |
| KBS-35DA-3FCS | BUZZR PIEZO ELEMENT 2.9KHZ 35MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1-172341-6 | 功能描述:管脚和插座连接器 OBSOLETE RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值: |
| 1-172341-9 | 功能描述:管脚和插座连接器 PLUG 12 POS MINI BLK RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值: |
| 1-172342-2 | 功能描述:管脚和插座连接器 OBSOLETE RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值: |
| 1-172342-5 | 制造商:TE Connectivity 功能描述:CONN HOUSING PL 15 POS 4.2MM ST - Bulk |
| 1-172342-6 | 制造商:TE Connectivity 功能描述:CONN HOUSING PL 15 POS 4.2MM ST - Bulk |
发布紧急采购，3分钟左右您将得到回复。