参数资料
型号: 1-172341-2
厂商: TE Connectivity
文件页数: 3/12页
文件大小: 0K
描述: CONN PLUG 12POS MINI-UMNL RED
RoHS指令信息: 1-172341-2 Statement of Compliance
3D 型号: 1-172341-2.pdf
标准包装: 3,000
系列: 迷你通用 MATE-N-LOK
连接器类型: 插头
触点类型:: 公形或母形
位置数: 12
间距: 0.163"(4.14mm)
行数: 3
行间距: 0.163"(4.14mm)
安装类型: 自由悬挂
触点终端: 压接
紧固型: 销锁
颜色:
包装: 散装
请注意: 不提供触点
配套产品: 1-794040-1-ND - CONN HEADER 12POS VERT MINI-UMNL
1-794040-0-ND - CONN HEADER 12POS VERT MINI-UMNL
794040-1-ND - CONN HEADER 12CIRC TIN
A32466-ND - CONN HEADER 12POS VERT .163 GOLD
A32465-ND - CONN HEADER 12POS VERT .163 TIN
A25614-ND - CONN HEADER 12POS VERT .163 AU
A25613-ND - CONN HEADER 12POS VERT .163 TIN
相关产品: A97685TR-ND - CONN PIN 22-26AWG MINI U MNL TIN
A100828CT-ND - CONN SOCKET 20-16AWG M-UNML TIN
A100436TR-ND - CONTACT PIN 16-20AWG MINI-UMNL
170365-4-ND - CONN SOCKET 22-26AWG MINI-UMNL
A97689CT-ND - CONN SOCKET 18-22AWG GOLD CRIMP
A97688CT-ND - CONN SOCKET 22-26AWG GOLD CRIMP
A97687CT-ND - CONN SOCKET 22-26AWG TIN CRIMP
A97686CT-ND - CONN PIN 18-22AWG M-U-MNL TIN
A97675CT-ND - CONN PIN 22-26AWG M-U MNL GOLD
A97678-ND - CONN SOCKET 22-26AWG GOLD CRIMP
更多...
114-- 16017
3.2. Contact Crimp Requirements
A. Carrier Cutoff
There shall be no burrs on the cutoff tab. The carrier cutoff tab length shall not exceed the dimension
given in Figure 2.
B. Crimp Height
The insulation barrel shall be formed around but not cut into the wire insulation. The wire barrel and
insulation barrel crimp height and width is given in Figure 2.
NOTE
i
The applied crimp dimension (within the function range of the product) is dependent on the termination tooling being
used. Refer to the documentation (applicator logs and instruction sheets) supplied with the termination tooling for the
applied crimp height.
C. Contact Stop
The contact stop must not be crimped. Any deformation to the contact stop will compromise the insertion
depth of the contact in the contact cavity of the housing.
D. Front and Rear Bellmouths
The front bellmouth shall be visible. The rear bellmouth shall conform to the dimensions given in Figure 2.
E. Wire Location
The end of the wire shall be flush with the end of the wire barrel or protrude no more than the dimension
given in Figure 2.
F. Locking Lances
The locking lances shall not be deformed.
Note: All requirements apply to both pin
and socket contact.
Locking Lances Not Deformed
Stack Wires as Shown
For 2--Wire Crimping
Wire Barrel
Locking Lances Not Deformed
Rev L
Contact Requirements
Wire Strands and Insulation
Both Visible in This Area
Contact Stop Not
Crimped or Deformed
End of Wire Flush With
End of Wire Barrel or
0.88 [.035] (Max) Wire Length
Front Bellmouth Visible
Contact Stop Not
Crimped or Deformed
0.25 [.010] Max Flash
0.50 [.020] Cutoff Tab Length
Figure 2 (Cont’d)
Insulation Barrel Formed
Around But Not Cutting
into Wire Insulation
Wire Barrel Seam Closed With
No Strands Protruding or Showing
0.10--0.51 [.004--.020] (Applicator)
0.10 [.004] Min (Hand Tool)
Rear Bellmouth
No Burrs on Cutoff Tab
3 of 12
相关PDF资料
PDF描述
CRA06S083100RFTA RES ARRAY 100 OHM 4 RES 1206
KBS-41DA-2A BUZZER PIEZO ELEMENT 2KHZ 41MM
CRA06P0831K00FTA RES ARRAY 1K OHM 4 RES 1206
KBS-35DA-3G BUZZR PIEZO ELEMENT 2.6KHZ 35MM
KBS-35DA-3FCS BUZZR PIEZO ELEMENT 2.9KHZ 35MM
相关代理商/技术参数
参数描述
1-172341-6 功能描述:管脚和插座连接器 OBSOLETE RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值:
1-172341-9 功能描述:管脚和插座连接器 PLUG 12 POS MINI BLK RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值:
1-172342-2 功能描述:管脚和插座连接器 OBSOLETE RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值:
1-172342-5 制造商:TE Connectivity 功能描述:CONN HOUSING PL 15 POS 4.2MM ST - Bulk
1-172342-6 制造商:TE Connectivity 功能描述:CONN HOUSING PL 15 POS 4.2MM ST - Bulk