参数资料
| 型号： | 1-172341-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/12页 |
| 文件大小： | 0K |
| 描述： | CONN PLUG 12POS MINI-UMNL RED |
| RoHS指令信息： | 1-172341-2 Statement of Compliance |
| 3D 型号： | 1-172341-2.pdf |
| 标准包装： | 3,000 |
| 系列： | 迷你通用 MATE-N-LOK |
| 连接器类型： | 插头 |
| 触点类型：： | 公形或母形 |
| 位置数： | 12 |
| 间距： | 0.163"（4.14mm） |
| 行数： | 3 |
| 行间距： | 0.163"（4.14mm） |
| 安装类型： | 自由悬挂 |
| 触点终端： | 压接 |
| 紧固型： | 销锁 |
| 颜色： | 红 |
| 包装： | 散装 |
| 请注意： | 不提供触点 |
| 配套产品： | 1-794040-1-ND - CONN HEADER 12POS VERT MINI-UMNL 1-794040-0-ND - CONN HEADER 12POS VERT MINI-UMNL 794040-1-ND - CONN HEADER 12CIRC TIN A32466-ND - CONN HEADER 12POS VERT .163 GOLD A32465-ND - CONN HEADER 12POS VERT .163 TIN A25614-ND - CONN HEADER 12POS VERT .163 AU A25613-ND - CONN HEADER 12POS VERT .163 TIN |
| 相关产品： | A97685TR-ND - CONN PIN 22-26AWG MINI U MNL TIN A100828CT-ND - CONN SOCKET 20-16AWG M-UNML TIN A100436TR-ND - CONTACT PIN 16-20AWG MINI-UMNL 170365-4-ND - CONN SOCKET 22-26AWG MINI-UMNL A97689CT-ND - CONN SOCKET 18-22AWG GOLD CRIMP A97688CT-ND - CONN SOCKET 22-26AWG GOLD CRIMP A97687CT-ND - CONN SOCKET 22-26AWG TIN CRIMP A97686CT-ND - CONN PIN 18-22AWG M-U-MNL TIN A97675CT-ND - CONN PIN 22-26AWG M-U MNL GOLD A97678-ND - CONN SOCKET 22-26AWG GOLD CRIMP 更多... |
114-- 16017
G. Wire Barrel Seam
The wire barrel seam shall be closed adequately to confine all strands of the wire. There shall be no loose
strands. Wire strands should not be embedded in the outside of the wire barrel.
H. Straightness
The contact, including the cutoff tab, shall not be bent above or below the datum line more than the
amount shown in Figure 3.
I. Twist and Roll
There shall be no twist or roll in crimped portion that will impair usage of the contact. See Figure 3.
Up--and--Down
Side--to--Side
Note: Not to Scale
Straightness
Twist and Roll
4 _ Max
4 _ Max
4 _ Max
Datum Line
Datum Line
10 _ Max
10 _ Max
Datum Line
Figure 3
3.3. Assembly
A crimped contact (pin or socket) must be inserted into the housing by aligning it with the desired contact cavity
in the BACK (wire side) of the housing. The wire must be grasped directly behind the insulation barrel and the
contact pushed straight into the contact cavity until the contact bottoms (there will be an audible click).
CAUTION
!
Excessive force must NOT be used when inserting the contact into the contact cavity. The contact stop of the contact
is designed to ensure proper insertion depth of the contact. Over--insertion will cause damage to the contact or contact
cavity of the housing and prevent the contact from floating in the contact cavity, which is necessary for optimum
performance of the connector.
The wire must be pulled back lightly to ensure that the contact is locked in place.
3.4. Panel Mounting (Cap Housing)
A. Thickness
The panel thickness range shall be 0.79 through 2.01 [.031 through .079].
B. Cutout
The dimensions of the panel cutout for panel mounting is provided in Figure 4.
Rev L
5 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| CRA06S083100RFTA | RES ARRAY 100 OHM 4 RES 1206 |
| KBS-41DA-2A | BUZZER PIEZO ELEMENT 2KHZ 41MM |
| CRA06P0831K00FTA | RES ARRAY 1K OHM 4 RES 1206 |
| KBS-35DA-3G | BUZZR PIEZO ELEMENT 2.6KHZ 35MM |
| KBS-35DA-3FCS | BUZZR PIEZO ELEMENT 2.9KHZ 35MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1-172341-6 | 功能描述:管脚和插座连接器 OBSOLETE RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值: |
| 1-172341-9 | 功能描述:管脚和插座连接器 PLUG 12 POS MINI BLK RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值: |
| 1-172342-2 | 功能描述:管脚和插座连接器 OBSOLETE RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值: |
| 1-172342-5 | 制造商:TE Connectivity 功能描述:CONN HOUSING PL 15 POS 4.2MM ST - Bulk |
| 1-172342-6 | 制造商:TE Connectivity 功能描述:CONN HOUSING PL 15 POS 4.2MM ST - Bulk |
发布紧急采购，3分钟左右您将得到回复。