- 您现在的位置：买卖IC网 > Datasheet目录542 > 1-46673-0 (TE Connectivity)TOOL HEAD CRIMP 22-16AWG STRATO Datasheet资料下载
参数资料
| 型号： | 1-46673-0 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/6页 |
| 文件大小： | 0K |
| 描述： | TOOL HEAD CRIMP 22-16AWG STRATO |
| 标准包装： | 1 |
| 系列： | Strato-Therm |
| 压接或电缆尺寸： | 16-22 AWG |
| 压接手柄： | 1213563-1，1213804 |
| 连接器类型： | 端子及连接件 |
| 相关产品： | 1213563-1-ND - TOOL DAHT ADAPTER ASSEMBLY |
SIZE (AWG)
STRIP LENGTH
1--46673--1 D
i
STRATO- THERM Crimping Heads
WIRE
TOOL
1--46673--0
22--16 5.16--5.94
[.203--.234]
1--46988--0 16--14
NOTE: D For wires with thin--wall insulation.
Figure 2
3. HEAD INSTALLATION AND REMOVAL
3.1. Head Selection
NOTE Crimping heads are coated with a preservative to
prevent rust and corrosion. Wipe this preservative
from the head, particularly from the crimping
surfaces.
3.2. Installation
DANGER To avoid personal injury, be sure to exercise
extreme caution when handling the crimp tool.
Avoid accidentally depressing the trigger control
when installing or removing crimp heads.
DANGER DO NOT operate the battery tool without the
proper crimping head installed. After crimping
head is installed, make sure that the quick pins
are properly inserted to avoid personal injury and
damage to the tool.
1. Remove quick pins from the adapter assembly.
Refer to Figure 1.
2. Insert crimping head into the adapter assembly.
3. After the crimping head is properly aligned,
insert the quick pins through the two holes in the
adapter and through the holes in the crimp head.
408- 10033
3.3. Removal
DANGER To avoid personal injury, ALWAYS disconnect the
battery from the tool before removing crimping
head.
Remove the quick pins from the crimping head; then
remove the crimping head from the tool holder.
4. CRIMPING PROCEDURES
DANGER To avoid personal injury, ALWAYS keep fingers
clear of crimping jaws when operating the tool.
Never place anything within the crimping jaws
except Tyco Electronics terminals or splices.
4.1. Crimping Procedure
1. Strip wire to dimensions shown in Figure 2. DO
NOT nick wire strand or use wires with nicked or
missing conductor strands.
2. Push the locator up and, from the FRONT side
of the tool, insert the terminal or splice wire barrel
sleeve into the crimping jaws making sure that the
edge of the wire barrel sleeve rests against the
locator. See Figures 3 and 4.
3. Depress the trigger to advance the moving ram.
This closes the crimp jaws in order to hold the
terminal in place. DO NOT deform the wire barrel.
4. Insert wire conductor through the insulation
barrel sleeve and into the wire barrel sleeve until it
is flush with the outer edge of the wire barrel
sleeve.
NOTE
i
The quick pins will “snap” into position when they
are properly inserted.
NOTE
i
The wire barrel sleeve on high--temperature
terminals and splices is color--coded orange.
Heat--resistant terminals and splices are not
color--coded. Refer to Figure 5.
Terminal Crimp
Back Side of Tool
Edge of Wire Barrel
Sleeve Resting
Against Locator
Terminal Tongue
Through Slot in
Locator
Wire Barrel
Sleeve
Insert Wire Conductor
Through Insulation
Barrel Sleeve and into
Wire Barrel Sleeve
Insulation
Barrel Sleeve
Figure 3
Push Locator Up So That Terminal
Tongue Slides Through Slot in Locator
2 of 6
Tyco Electronics Corporation
Rev B
相关PDF资料 |
PDF描述 |
|---|---|
| 1-47387-0 | TOOL HEAD CRIMP 16-14AWG PIDG |
| 1-49935-0 | TOOL HEAD CRIMP 22-10AWG SOLIS |
| 0010844061 | 084 DIA ASSY HDR HSG PIN 94V-0 |
| 0011020001 | INSERTION TOOL HT1807 |
| 0011020003 | INSERTION TOOL HT1353 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1-46673-1 | 功能描述:手工工具 DA BAT TL HD 22-16 RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 146675 | 制造商:Molex 功能描述: |
| 146681-000 | 制造商:TE Connectivity 功能描述:TXR54AB45-2210AI - Bulk 制造商:TE Connectivity 功能描述:ADPTR TINEL LOCK ANG SHELL 22 制造商:TE Connectivity 功能描述:Connector Accessories Tinel Lock Adapter 45? Angle Aluminum Alloy Olive Drab Cadmium Over Electroless Nickel |
| 1466924-1 | 制造商:TE Connectivity 功能描述: |
| 1466A 0107500 | 功能描述:CBL 4PR/18AWG 1COND/22AWG SHLD 制造商:belden inc. 系列:* 零件状态:在售 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。