- 您现在的位置：买卖IC网 > Datasheet目录542 > 1-46673-0 (TE Connectivity)TOOL HEAD CRIMP 22-16AWG STRATO Datasheet资料下载
参数资料
| 型号： | 1-46673-0 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | TOOL HEAD CRIMP 22-16AWG STRATO |
| 标准包装： | 1 |
| 系列： | Strato-Therm |
| 压接或电缆尺寸： | 16-22 AWG |
| 压接手柄： | 1213563-1，1213804 |
| 连接器类型： | 端子及连接件 |
| 相关产品： | 1213563-1-ND - TOOL DAHT ADAPTER ASSEMBLY |
STRATO- THERM Crimping Heads
Splice Crimp (First Crimp)
Back Side
of Tool
408- 10033
Edge of Wire Barrel
Sleeve Resting
Against Locator
Open Section of
Splice in Slot in
Locator
Wire Barrel
Sleeve
Insulation
Barrel Sleeve
Figure 4
Push Locator Up So That Splice
Slides Through Slot in Locator
Insert Wire Conductor
Through Insulation
Barrel Sleeve and into
Wire Barrel Sleeve
Terminal
Wire Barrel
Sleeve
NOTE
i
Always place both adjustment pins in the same
position. See Figure 6.
Splice
Wire Barrel
Sleeve
Insulation
Barrel Sleeve
Positions
Insulation
Barrel Sleeve
Figure 5
5. Activate the tool to complete the crimp. The
crimp tool automatically returns to the first position
of the cycle when the crimp is complete.
Insulation
Adjustment
Pin(s) (Ref)
3
2
1
1
2
3
6. Allow tool head to open FULLY. Remove the
crimped terminal or splice from the crimping jaws.
7. To crimp the other half of the splice, reposition
the uncrimped sleeve in the crimping jaws as
described in Step 2. Follow Steps 3 through 6 to
complete the crimp.
8. Refer to Section 5 and Figure 7 for crimp
inspection.
4.2. Insulation Crimp Adjustment
The insulation crimping section of the crimping head
has three positions: 1—Tight; 2—Medium; and
3—Loose.
1. Insert insulation adjustment pins in Position 3.
See Figure 6.
Figure 6
2. Place terminal or splice in crimping jaws, as
shown in Figures 3 and 4.
3. Insert unstripped wire only into the
insulation barrel of the terminal or splice. See
Figures 3 and 4.
4. Crimp terminal or splice as described in
Paragraph 4.1.
5. Remove terminal or splice. Bend wire forward
and then backward. The terminal or splice should
retain its grip on the wire. If the wire pulls out,
reposition the insulation adjustment pins in the next
tighter position and repeat crimping procedure.
6. Repeat adjustment as necessary until desired
insulation grip is obtained. DO NOT use a tighter
setting than required.
Rev B
Tyco Electronics Corporation
3 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| 1-47387-0 | TOOL HEAD CRIMP 16-14AWG PIDG |
| 1-49935-0 | TOOL HEAD CRIMP 22-10AWG SOLIS |
| 0010844061 | 084 DIA ASSY HDR HSG PIN 94V-0 |
| 0011020001 | INSERTION TOOL HT1807 |
| 0011020003 | INSERTION TOOL HT1353 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1-46673-1 | 功能描述:手工工具 DA BAT TL HD 22-16 RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 146675 | 制造商:Molex 功能描述: |
| 146681-000 | 制造商:TE Connectivity 功能描述:TXR54AB45-2210AI - Bulk 制造商:TE Connectivity 功能描述:ADPTR TINEL LOCK ANG SHELL 22 制造商:TE Connectivity 功能描述:Connector Accessories Tinel Lock Adapter 45? Angle Aluminum Alloy Olive Drab Cadmium Over Electroless Nickel |
| 1466924-1 | 制造商:TE Connectivity 功能描述: |
| 1466A 0107500 | 功能描述:CBL 4PR/18AWG 1COND/22AWG SHLD 制造商:belden inc. 系列:* 零件状态:在售 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。