- 您现在的位置：买卖IC网 > Datasheet目录591 > 1213670-1 (TE Connectivity)TOOL SEATING ASSY FOR STACK RJ45 Datasheet资料下载
参数资料
| 型号： | 1213670-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/3页 |
| 文件大小： | 0K |
| 描述： | TOOL SEATING ASSY FOR STACK RJ45 |
| 标准包装： | 1 |
| 系列： | * |
Side Plate
(2 Places)
Alignment Post
Seating Tool Assembly 1213670-1
For Stacked RJ-45 Integrated
Connector Assembly
Back Plate
Cutout
Instruction Sheet
408-8996
19 DEC 11 Rev A
Top Block
Stacked RJ-45 Integrated
Connector Assembly
Printed Circuit (PC)
Board (Ref)
Compliant-Pin Contact
PC Board Support Fixture
(Ref)
Figure 1
NOTE
i
1. INTRODUCTION
Seating Tool Assembly 1213670-1 is used to seat a
stacked RJ-45 integrated connector assembly
(reference part number 1658821-1) having compliant
pin contacts and alignment posts onto the pc board.
Refer to Application Specification 114-13147 for
description of connector assembly.
All numerical values in this instruction sheet are in
metric units [with U.S. customary units in brackets].
Dimensions are in millimeters [and inches]. Figures
are not drawn to scale.
2. DESCRIPTION
The seating tool consists of a top block, two side
plates, and a back plate. The back plate has a cutout
designed to accept the power-over-ethernet (PoE)
chip set of the connector assembly during seating of
the connector assembly. See Figure 1.
The top block provides a surface to accept the force
applied by the application tool to seat the connector
assembly onto the pc board. During seating, the top
block and side plates protect the connector assembly,
and the back plate supports the back of the connector
assembly.
3. REQUIREMENTS
3.1. PC Board Support Fixture (Customer Supplied)
A pc board support must be used to provide proper
support for the pc board and to protect the pc board
and the connector and connector assembly from
damage. The support fixture must be designed for
specific needs using the following recommendations:
? it should be at least 25.4 mm [1.0 in.] longer and
wider than the pc board
? it should have flat surfaces with holes or a channel
large enough and deep enough to receive any
protruding components of the connector assembly
3.2. Application Tool
Power for seating tools must be provided by an
application tool (with a ram) capable of supplying a
downward force of 44.5 N [10 lb-force] per contact.
? 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company ?
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111 ?
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change. ?
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 3
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 1213783-1 | TOOL HAND CRIMP 16-26AWG |
| 1213860-1 | CERTI-CRIMP II ADAPT-SDE BENCH |
| 1214518-2 | TOOL EXTRACTION FOR AMPLIVAR |
| 1214695-1 | TOOL CRIMPER ASSY BACKSHELL |
| 121586-5236 | TOOL HAND CRIMP 20-26AWG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1213675-1 | 功能描述:手工工具 STRAIGHT ACTION ADAPT SUB-ASSY RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1213-680-0 | 制造商:Zierick Manufacturing Corporation 功能描述: |
| 1213680-1 | 制造商:TE Connectivity 功能描述:C-HEAD ADAPTER SUB-ASSY - Bulk |
| 1213681-1 | 制造商:TE Connectivity 功能描述:PIN,GROOVED - Bulk 制造商:TE CONNECTIVITY 功能描述:PIN,GROOVED |
| 1-213684-1 | 功能描述:D-Sub标准连接器 OBSOLETE RoHS:否 制造商:Omron Electronics 位置/触点数量:9 排数:2 型式:Female 安装风格:Through Hole 安装角:Right 端接类型:Solder 过滤: |
发布紧急采购，3分钟左右您将得到回复。