参数资料
型号: 20-101-0492
厂商: Rabbit Semiconductor
文件页数: 52/110页
文件大小: 0K
描述: MODULE OP6800 FULL-FEATURED
标准包装: 1
系列: SBC
模块/板类型: 单板计算机模块
适用于相关产品: OP6800
其它名称: 20-101-492
20-101-492-ND
42
MiniCom (OP6800)
5.2.5 LCD/Keypad Sample Programs Showing TCP/IP Features
The following sample programs, found in the TCPIP subdirectory in
SAMPLES/LCD_Keypad/122x32_1x7
, are targeted at the Ethernet-enabled versions of
the OP6800. Remember to configure the IP address, netmask, and gateway as indicated in
the sample programs.
MBOXDEMO.C
—This program implements a web server that allows Web e-mail messages
to be entered that are then shown on the LCD display. The keypad allows you to scroll
within messages, flip to other e-mails, mark messages as read, and delete e-mails.
When a new e-mail arrives, an LED turns on, and turns off once the message has been
marked as read. A log of all e-mail actions is kept, and can be displayed in the Web
browser. All current e-mails can also be read with the Web browser.
When using MBOXDEMO.C, connect the OP6800 and a PC (or other device with a Web
Browser) to an Ethernet. If you connect the PC and the OP6800 directly, be sure to use
a crossover Ethernet cable; straight-through Ethernet cables and a hub may be used
instead.
TCP_RESPOND.C
—This program and TCP_SEND.C are executed on two separate sin-
gle-board computers to demonstrate how the two boards communicate with each other.
Use PCSEND.EXE on the PC console side at the command prompt if you do not have a
second board. PCSEND.EXE is located with source code in the
SAMPLES/LCD_Keypad/Windows
directory.
TCP_RESPOND.C
waits for a message from another single-board computer. The mes-
sage received is displayed on the LCD, and you may respond by pressing a key on the
keypad. The response is then sent to the remote single-board computer.
TCPSEND.C
—This program and TCP_RESPOND.C are executed on two separate single-
board computers to demonstrate how the two boards communicate with each other. Use
PCRESPOND.EXE
on the PC console side at the command prompt if you do not have a
second board. PCRESPOND.EXE is located with source code in the
SAMPLES/LCD_Keypad/Windows
directory.
When a key on the keypad is pressed, a message associated with that key is sent to a
specified destination address and port. The destination then responds to that message.
The response is displayed on the LCD.
Note that only the LEFT and UP scroll keys are set up to cause a message to be sent.
When using TCPSEND.C and TCP_RESPOND.C, connect the OP6800 and the other single-
board computer to an Ethernet. If you connect the them directly, be sure to use a crossover
Ethernet cable; straight-through Ethernet cables and a hub may be used instead.
相关PDF资料
PDF描述
101-0492 INTERFACE OP6800 W/ETHERNET PORT
11FMN-BMTR-A-TB CONN FMN HSNG 11POS SGL REV SMD
11FMN-BMT-A-TF CONN FMN HSNG 11POS SNGL NOR SMD
AT24C01-10SI-2.7 IC EEPROM 1KBIT 400KHZ 8SOIC
AT24C01-10PI-2.7 IC EEPROM 1KBIT 400KHZ 8DIP
相关代理商/技术参数
参数描述
20-101-0494 功能描述:模块化系统 - SOM RCM2250 RabbitCore Module RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-0495 功能描述:处理器配件 BASEPLATE RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于:
20-101-0497 功能描述:单板计算机 OP6810 RoHS:否 制造商:Ampro By ADLINK 外观尺寸:EPIC 处理器类型:Intel Atom D510 频率:1.66 GHz 存储容量:2 GB (max) 存储类型:DDR2, L2 Cache 接口类型:Ethernet, PS/2, SATA, Serial, USB 工作电源电压:5 V, 12 V 功耗:13 W 最大工作温度:+ 70 C 尺寸:165.1 mm x 114.3 mm
201-01050 功能描述:铝质电解电容器 - 带引线 1 uF Electrolytic Capacitor RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk
201-0105-01 功能描述:印刷电路板和试验板 JTAG 20 Pin Connector RoHS:否 制造商:3M Electronic Solutions Division 产品:Jumper & Insulated Wires 描述/功能:Jumper wire, 22 AWG 0.1 inch 长度:0.1 in 宽度: