参数资料
型号: 20-151-0178
厂商: Rabbit Semiconductor
文件页数: 68/162页
文件大小: 0K
描述: CABLE CONVERTER RS-232 TO USB
标准包装: 1
附件类型: USB 至 RS232 适配器
适用于相关产品: 基于 Rabbit 的板
产品目录页面: 619 (CN2011-ZH PDF)
其它名称: 20-151-0178-ND
316-1181
5.6 Speaker
DAC Channel #0 can be configured as an input to a speaker. The audio hardware on the RabbitFLEX
board has two sections, the filter and the amplifier. The first part, the filter, converts the high speed digital
pulses that come from the Rabbit processor into a smoothly varying analog signal. It does this through low
pass filtering . According to its name, low pass filtering allows low frequency signals to pass through it
while blocking higher frequency signals. For a complex signal like digital pulses, this has the effect of
averaging them out to produce an analog signal. In this way, the low pass filter converts a pulse width
modulated (PWM) signal into a variable voltage signal. The filter is composed of resistors and capacitors
arranged so that the high frequency signals are bypassed to ground through the capacitors.
After the audio signal is filtered it must be amplified in order to be powerful enough to drive a speaker.
This is done with an LM386 audio amplifier IC. The signal from the filter must be amplified because it is a
high impedance signal. Simply put, a high impedance signal is one that is degraded if it is used to directly
power an electrical load. So instead of directly connecting the filter output to the speaker, it is connected to
the amplifier input. The amplifier input senses the signal from the output and generates a matching low
impedance signal that has enough power to drive the speaker effectively.
When dealing with digital to analog conversion and WAV files (a popular standard for digitized audio
information) one of the most important questions is does it sound like the original analog signal that was
used to create the WAV file?
The answer depends on two things: the sampling rate and the sampling precision used when creating the
digital audio file. Digital audio samples are simply a sequence of values, each value representing the
amplitude of an audio signal at a given point in time.
Figure 5.4 Sampling of a Sound Waveform
Amplitude
.. . . . .
. ...
.
Time
The sampling rate is the number of samples taken in one second. Looking at the figure above, you can see
that if you connect the dots from left to right with straight lines, you lose a lot of the information repre-
sented by the curved line. By increasing the sampling rate, the closer the straight lines match the curved
line, meaning less information is lost.
62
More Information on RabbitFLEX BL300F
相关PDF资料
PDF描述
MAX11200EVKIT+ KIT EVALUATION FOR MAX11200
HCC06DRTF-S13 CONN EDGECARD 12POS .100 EXTEND
HK1608R47J-T INDUCTOR HI FREQ 470NH 5% 0603
PCM16XD0 PROCESSOR MODULE FOR MPLAB-ICE
SDR1006-681KL INDUCTOR POWER 680UH 0.28A SMD
相关代理商/技术参数
参数描述
20-151-0183 功能描述:处理器配件 UNIVL PWRSUPLY 12VDC 1A/W MOLEX MICROFIT3 RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于:
2015103-1 制造商:TE CONNECTIVITY 功能描述:RF C/A, RT ANG QMA/DIN 1.0/2.3 CONN
2015-104 制造商:The Bergquist Company 功能描述:THERMAL PAD TO-3P PK5 制造商:The Bergquist Company 功能描述:THERMAL PAD, TO-3P, PK5 制造商:The Bergquist Company 功能描述:THERMAL PAD, TO-3P, PK5; Insulator Body Material:Silicone Elastomer; Thermal Conductivity:3.5W/m.K; Breakdown Voltage Vbr:4kV; Thickness:0.508mm; Volume Resistivity:100000Mohm-m; SVHC:No SVHC (19-Dec-2012); Electrical Property Ins /
2015-104 制造商:The Bergquist Company 功能描述:THERMAL PAD TO-3P 制造商:The Bergquist Company 功能描述:THERMAL PAD, TO-3P
201511 制造商:Phoenix Contact 功能描述:Misc Products