参数资料
型号: 450-0019
厂商: LS Research LLC
文件页数: 14/40页
文件大小: 0K
描述: MODULE SIFLEX02 RF CASTELLATION
标准包装: 50
系列: ModFlex™
频率: 915MHz
数据传输率 - 最大: 1Mbps
调制或协议: 802.15.4 Zigbee
应用: 通用
功率 - 输出: 250mW
灵敏度: -102dBm
电源电压: 2 V ~ 3.45 V
电流 - 接收: 30mA
电流 - 传输: 285mA
数据接口: 用于引脚的垫片
存储容量: 256kB 闪存,16kB SRAM
天线连接器: 堡形
工作温度: -40°C ~ 85°C
封装/外壳: 模块
包装: 托盘
SiFLEX02 TRANSCEIVER MODULE
DATASHEET
Antenna Options
The SiFLEX02 module includes multiple antenna options. The module’s regulatory certification has
been completed with the following antennas:
?
?
?
?
Integrated 3.2-inch wire monopole soldered to the board.
Pulse W3112A helical antenna
LSR 001-0002 900 MHz Dipole Antenna with Reverse Polarity SMA Connector and LSR 080-0001 u.fl to
Reverse Polarity SMA Bulkhead Cable 105mm
Nearson S467AH-915 dipole antenna attached to the board via 6-inch cable with connector.
The SiFLEX02 RF castellation for off board antenna is not covered in the modular certification. If a host
board is designed that will utilize an off board antenna via the castellated antenna connection an
additional certification will be required. LS Research is equipped with a certification lab and can assist
in getting this done at a very reasonable cost in a short period of time.
An adequate ground plane is necessary to provide good efficiency. The ground plane of the host board
on which the module is mounted increases the effective antenna ground plane size and improves the
antenna performance.
The environment the module is placed in will dictate the range performance The non-ideal
characteristics of the environment will result in the transmitted signal being reflected, diffracted, and
scattered. All of these factors randomly combine to create extremely complex scenarios that will affect
the link range in various ways.
It is also best to keep some clearance between the antenna and nearby objects. This includes how the
module is mounted in the product enclosure. Unless the items on the following list of recommendations
are met, the radiation pattern can be heavily distorted.
Whichever antenna is used, it is best to keep a few things in mind when determining its location.
?
?
?
?
Never place ground plane or copper trace routing underneath the antenna.
LSR recommends keeping metal objects as far away from the antenna as possible. At a very minimum
keep the antenna at least 5 cm from any metallic objects, components, or wiring. The farther the antenna
is placed from these interferers, the less the radiation pattern and gain will be perturbed.
Do not embed the antenna in a metallic or metalized plastic enclosure.
If located within a plastic enclosure, keep the enclosure at least 1 cm from the antenna.
The information in this document is subject to change without notice.
330-0009-R3.1
Copyright ? 2009-2012 LS Research, LLC
Page 14 of 40
相关PDF资料
PDF描述
IF-14-20 XFRMR 115/230V 10V 1.4A 14VA PCB
IF-14-16 XFRMR 115/230V 8V 1.75A 14VA PCB
2-582118-6 CONN TEST PROBE SILVER BLUE PCB
241-8-36L XFRMR PWR 115V 36VCT 2.8A LEADS
241-8-16L XFRMR PWR 115V 16VCT 6.25A LEADS
相关代理商/技术参数
参数描述
45-0001-BR 制造商:DATACOMM ELECTRONICS 功能描述:CABLE PASS THROUGH WALL PLATE RECESSED IN WALL BROWN
45-0001-LA 制造商:DATACOMM ELECTRONICS 功能描述:CABLE PASS THROUGH WALL PLATE RECESSED IN WALL LT ALMOND
45-0001-WH 制造商:DATACOMM ELECTRONICS 功能描述:CABLE PASS THROUGH WALL PLATE RECESSED IN WALL WHITE
450002 制造商:n/a 功能描述:RELAY 240VAC 25AMPS INPUT 3-32VDC
450-002 制造商:n/a 功能描述:RELAY 240VAC 25AMPS INPUT 3-32VDC