- 您现在的位置：买卖IC网 > PDF目录18543 > 47820 (TE Connectivity)DIE TERMINYL 69051 8AWG PDF资料下载
参数资料
| 型号： | 47820 |
| 厂商： | TE Connectivity |
| 文件页数： | 4/8页 |
| 文件大小： | 0K |
| 描述： | DIE TERMINYL 69051 8AWG |
| 标准包装： | 1 |
| 系列： | * |
408- 1729
Splices with Step- Down Adapter
Step-- Down Adapter
4.4. Crimping PLASTI- GRIP Butt Splices
DANGER Avoid personal injury. When operating tool or
power unit, exercise caution while holding butt
splices or wire near the crimping area.
WIRE SIZE
(AWG)
STEP
8 to 16--14
8 to 12--10
6 to 8
4 to 8
4 to 6
2 to 4
CRIMPING
DIE
47820
47821
47822
47823
DIE AND
SPLICE
COLOR CODE
Red
Blue
Yellow
Red
STEP-- DOWN
ADAPTER
COLOR CODE
Blue
Yellow
Red
Red
Blue
Yellow
1. Strip wires to the dimensions listed in Figure 3.
Do not nick or cut the wire strands.
2. Select the proper color--coded butt splice for the
wire size. The wire size stamped on the butt splice
and on the crimping die must match the wire size
selected.
3. Remove crimping head latch pin, and open
yoke. Remove the stationary die from the yoke,
then remove the locator from the stationary die.
Re--assemble the stationary die onto the yoke.
!
!
i
!
1/0 to 2 47824 Blue Red
Figure 6
3. Insert stripped wire into the wire barrel of the
end of the splice to be crimped until the wire
bottoms against the wire stop within the splice.
Refer to Figure 3.
4. Remove crimping head latch pin, and open
yoke.
5. Place the splice in the stationary die. Grasp the
end of the splice to be crimped and point the
opposite end toward the top of the head yoke at
approximately a 30 _ angle. Rotate the end of the
splice to be crimped into the die. Position the edge
of the window indent against the locator. Refer to
Figure 5.
6. Holding the splice in place, close the yoke and
insert the latch pin.
CAUTION Be sure that the latch pin is fully inserted, or
damage to the dies and tool or head will occur
when the tool is activated.
7. Holding the wire in place, activate tool or power
unit to complete first wire barrel crimp.
8. When crimp is completed, remove the latch pin,
open the yoke and remove splice.
NOTE If splice sticks in die after crimping, apply a
rocking action to the splice to remove it from the
die. Wipe light oil on dies to reduce sticking, or
use spray dry lubricant.
9. To crimp the other half of splice, reposition
uncrimped end of splice in the stationary die and
follow the same procedure used to crimp the first
half of splice.
10. Inspect the crimp according to Section 5.
4 of 8
CAUTION To avoid damage to the dies, be sure that the
stationary die is properly oriented with the
moving die.
4. Insert the stripped wire into the wire barrel of the
end of the butt splice to be crimped until the wire
bottoms against the wire stop within the splice.
5. Place the butt splice in the stationary die with
the wire barrel of the end of the splice to be
crimped centered over the crimping chamber. See
Figure 7.
6. Holding butt splice in place, close the yoke and
insert the latch pin.
Crimping Butt Splices
Wire Barrel in
Stationary Die
Centered Over
Crimping Chamber
Locator Removed
from Stationary Die
Figure 7
CAUTION Be sure that the latch pin is fully inserted,
otherwise damage to the die and tool or head will
occur when the tool or power unit is activated.
7. Holding wire in place, activate tool or power unit
to complete first wire barrel crimp.
8. When crimp is completed, remove the latch pin,
open the yoke and remove the butt splice.
Rev J
相关PDF资料 |
PDF描述 |
|---|---|
| AML22JBC2AD | SWITCH PUSHBUTTON DPDT 3A 125V |
| B82721A2401N21 | COIL CHOKE 27MH 0.4A HORZ |
| 252A103B60TA | POT JOYSTICK 10K OHM |
| B82721A2152N1 | COIL CHOKE 3.3MH 1.5A HORZ |
| 252B154B40TA | POT JOYSTICK 150K OHM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 4782-01 | 制造商:FILTRAN 制造商全称:Filtran LTD 功能描述:Power Transformers L-Brackets |
| 4782-02 | 制造商:FILTRAN 制造商全称:Filtran LTD 功能描述:Power Transformers L-Brackets |
| 4782-03 | 制造商:FILTRAN 制造商全称:Filtran LTD 功能描述:Power Transformers L-Brackets |
| 478203000 | 制造商:C&K Components 功能描述: |
| 4782-04 | 制造商:FILTRAN 制造商全称:Filtran LTD 功能描述:Power Transformers L-Brackets |
发布紧急采购，3分钟左右您将得到回复。