- 您现在的位置：买卖IC网 > Datasheet目录600 > 525690 (TE Connectivity)TOOL HAND CRIMP 18-20AWG Datasheet资料下载
参数资料
| 型号： | 525690 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/7页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND CRIMP 18-20AWG |
| 标准包装： | 25 |
| 系列： | Certi-Crimp™, PIDG™, Plasti-Grip™ |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 接头和端子，18-20 AWG |
| 特点： | 侧面插入，棘齿 |
GO
Double Action Hand Crimping Tools 525690 and 525691
5. MAINTENANCE AND INSPECTION
It is recommended that a maintenance and inspection
program be performed periodically to ensure
dependable and uniform terminations. Though
recommendations call for at least one inspection a
month, frequency of inspection depends on:
1. The care, amount of use, and handling of the
tool.
2. The presence of abnormal amounts of dust and
dirt.
3. The degree of operator skill.
4. Your own established standards.
The tool is inspected before being shipped; however,
it is recommended that the tool be inspected
immediately upon arrival to ensure that the tool has
not been damaged during shipment.
5.1. Daily Maintenance
1. Immersed the tool (handles partially closed) in a
reliable commercial degreasing compound to
remove accumulated dirt, grease, and foreign
matter. When degreasing compound is not
available, the tool may be wiped clean with a soft,
lint--free cloth. DO NOT use hard or abrasive
objects that could damage the tool.
2. Make certain that the retaining pins are in place
and that they are secured with retaining rings.
3. All pins, pivot points, and bearing surfaces
should be protected with a THIN coat of any good
SAE 20 motor oil. DO NOT oil excessively.
4. When the tool is not in use, keep the handles
closed to prevent objects from becoming lodged in
the jaws. Store the tool in a clean, dry area.
411- 1097
open quickly and fully, the spring is defective and
must be replaced. See Section 6, REPLACEMENT
AND REPAIR.
2. Inspect the head for worn, cracked, or broken
jaws. If damage is evident, return the tool for
evaluation and repair. See Section 6,
REPLACEMENT AND REPAIR
C. Gaging the Crimping Chamber
This inspection requires the use of plug gages
conforming to the dimensions provided in Figure 7.
To gage the crimping chamber, proceed as follows:
1. Remove traces of oil or dirt from the crimping
chamber and plug gage.
2. Insert each insulation crimp adjustment pin into
Position 1. See Figure 8.
GO Dia NO-- GO Dia
Jaw Closure
Configuration
SUGGESTED PLUG GAGE DESIGN
FOR WIRE BARREL SECTION
GAGE ELEMENT DIAMETER
TOOL
GO NO-- GO
525690 2.768--2.776 [.1090--.1093] 2.918--2.921 [.1149--.1150]
525691 3.022--3.030 [.1190--.1193] 3.172--3.175 [.1249--.1250]
GO Dia NO-- GO Dia
NO
GO
5.2. Periodic Inspection
A. Lubrication
Lubricate all pins, pivot points, and bearing surfaces
with any good SAE 20 motor oil as follows:
Tool used in daily production — daily
Tool used daily (occasional) — weekly
Tool used weekly — monthly
W
TOOL
525690
Jaw Closure
Configuration
SUGGESTED PLUG GAGE DESIGN
FOR INSULATION BARREL SECTION
GAGE ELEMENT THICKNESS
GO NO-- GO W
0.889--0.897 1.394--1.397 2.80--3.05
[.0350--.0353] [.0549--.0550] [.110--.120]
W
Wipe excess oil from the tool, particularly from the
crimping area. Oil transferred from the crimping area
onto certain terminations may affect the electrical
characteristics of an application.
525691
1.143--1.151
[.0450--.0453]
1.648--1.651
[.0649--.0650]
Figure 7
4.50--4.75
[.177--.187]
B. Visual Inspection
1. Close the tool handles until the ratchet releases
and then allow them to open freely. If they do not
3. Close the tool handles until the jaws bottom,
and hold in this position. DO NOT force beyond
initial contact.
Rev D
Tyco Electronics Corporation
5 of 7
相关PDF资料 |
PDF描述 |
|---|---|
| 525693 | TOOL HAND SOLIS STRATO 10-22AWG |
| 53200C | XFRMR CURR SENSE 10A 1:200 SMD |
| 532925-2 | TOOL HDI ALIGNMENT 540POS |
| 535072-1 | TOOL EURO TYPE C CONN INSERT |
| 539758-2 | DIE 2,8 TAB+EDS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 52569-0024 | 功能描述:HDMI, Displayport和DVI连接器 DVI CONNECTOR PLUG RoHS:否 制造商:Molex 系列:DisplayPort 产品类型:Displayport 型式:Female 位置/触点数量:20 端接类型:Solder 安装风格:SMD/SMT 方向:Right Angle 触点电镀:Gold |
| 525691 | 功能描述:手工工具 16-14 PIDG D.A.H.T. RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 52569-1029 | 制造商:FCI 功能描述: |
| 525692 | 功能描述:折皱器 HEAVY HEAD 12-10 RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 52569-2024 | 制造商:FCI 功能描述:DIGITAL VISUAL INTERFACE |
发布紧急采购，3分钟左右您将得到回复。