- 您现在的位置：买卖IC网 > Datasheet目录601 > 58644-1 (TE Connectivity)TOOL HEAD MTA .100 MASS INSERT Datasheet资料下载
参数资料
| 型号： | 58644-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | TOOL HEAD MTA .100 MASS INSERT |
| 标准包装： | 1 |
| 系列： | * |
Wire Guide
Wire Inserter
Locating Pawl (Hidden)
Push Rod
Mass Insertion Terminating Head 58644-1 ?
for MTA (Mass Termination Assembly) 100 ?
Feed-Through Receptacle Connectors
Figure 1
Ram
Instruction Sheet
408-4406
28 OCT 11 Rev C
Insertion Rod Adjuster
1. INTRODUCTION
Mass Insertion Terminating Head 58644-1, shown in
through receptacle connectors (positions 2 through
12) onto discrete wire sizes 28 through 22 AWG with a
maximum insulation diameter of 1.27 mm [.050 in.].
Refer to Figure 2 for reference connector part
Reasons for reissue are provided in Section 8,
REVISION SUMMARY.
2. DESCRIPTION (Figure 1)
The terminating head, when properly installed onto the
handle assembly, serves as a guide for the connector
during termination.
numbers.
NOTE
i
NOTE
i
This head is designed to terminate one connector
at a time.
A complete list of current connector part numbers
cannot be maintained on this document. For all part
numbers and their description, refer to Catalog
82056 or contact Product Information at the
number at the bottom of this page.
Features of the head and their functions are as
follows:
Wire Inserter -supports each wire in individual wire
slots so that, during the insertion cycle, the wire forced
into the two-slotted beam of the contact.
Wire Guide -holds the wires in position over the wire
inserter.
Ram -locates and holds the connector while pushing it
down onto the wires.
Locating Pawl -holds connector in proper alignment to
The head is used with Pistol Grip Manual Handle
Assembly 58074-1. For terminating head installation
procedures, and setup and operation of the handle
assembly, refer to Instruction Sheet 408-6790. Read
this and the referenced material before terminating
any connectors.
the wire inserter.
Push Rod -used to push the terminated connector past
the locating pawl for removal.
Insertion Rod Adjuster -is a piston for the ram and
regulates the travel of the inserted wires.
NOTE
i
Dimensions on this sheet are in metric units [with
U.S. customary units in brackets]. Figures are not
drawn to scale.
? 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company ?
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111 ?
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change. ?
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 5
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 58646-1 | TOOL HEAD MTA .156 MASS INSERT |
| 58707-2 | TOOL DIE SET ONLY 16-20 AWG |
| 59239-8 | TOOL HAND 10-12AWG 14-16AWG HD |
| 59275 | TOOL CERTI-CRIMP PLASTI-G 20-26 |
| 59287-2 | TOOL HAND HEAVY PIDG 10-12AWG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58644-2 | 制造商:TE Connectivity 功能描述:MTA .100 MASS INSERTION PGH - Bulk |
| 5864-5001-09 | 功能描述:RF 连接器 PCB R/A Jack Rcept 50 OHM RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 5864-5001-10 | 功能描述:RF 连接器 MCX RA JCK PCB .155LG RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 5864-5002-10 | 功能描述:RF 连接器 OSX RA PCB JACK MICRO MIN SMT RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 5864-5003-10 | 功能描述:RF 连接器 MCX RA JCK PCB .115LG RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
发布紧急采购，3分钟左右您将得到回复。