- 您现在的位置：买卖IC网 > Datasheet目录601 > 58644-1 (TE Connectivity)TOOL HEAD MTA .100 MASS INSERT Datasheet资料下载
参数资料
| 型号： | 58644-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | TOOL HEAD MTA .100 MASS INSERT |
| 标准包装： | 1 |
| 系列： | * |
408-4406
WIRE SIZE
(AWG)
MTA 100 FEED-THROUGH RECEPTACLE CONNECTORS
(With Locking Ramp) ■
COLOR CODE WITH POLARIZING TABS WITHOUT POLARIZING TABS
22
24
26
28
Red
White
Blue
Green
644540
644563
644564
644565
640620
640621
640622
640623
■ Dash numbers indicate number of contact positions (-2 through -12 are applicable for this terminating head).
Figure 2
Each wire is terminated in a connector contact using
the insulation displacement technique (a terminating
technique which inserts unstripped wire into a slotted
contact beam to form a reliable electrical connection
between the wire and the contact). Contact
termination is complete when the handle assembly is
actuated.
3. SETUP
3.1. Installing Head
The head can be installed onto the handle assembly
and used as a hand-held tool, or several tools can be
mounted onto a board to be used as a low-level
harness board fixture.
The board must have two 6.36-mm [.250-in.] holes
spaced 44.45 mm [1.75 in.] apart for each head.
Installing Head As
Harness Board Fixture
Handle ?
Assembly ?
(Ref)
NOTE
i
The handle assembly is not quick to install onto the
head; therefore, each head should have its own
handle assembly.
3.2. Test Termination
At least one test termination should be performed and
NOTE
i
NOTE
i
inspected before starting production. Determine the
wire size and select the appropriate color-coded
connector.
1. Using a small knife, cut off the wire retainers
(strain relief) from both sides of the test connector.
Wire retainers must be removed from test
connectors to provide a clear view for inspection-do
NOT use test connectors for production
applications.
2. Terminate the test connector according to Section
4 and inspect the connector following the
requirements in Step 6. Make any insertion depth
adjustments to the terminating head according to
Section 5 before starting production.
Rev C
Figure 3
4. TERMINATING PROCEDURE
1. Starting with the wire slot closest to the head
frame, push one wire into one slot for each contact
position of the connector being terminated. See
2. Insert the connector into the ram with the contact
insulation barrels facing the wire slots.
3. Using a screwdriver (or equivalent), push the
connector into the ram until the connector touches
the surface of the frame. Refer to Figure 5.
To ensure proper alignment in the head, all
connector positions must touch the surface of the
head frame.
2 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| 58646-1 | TOOL HEAD MTA .156 MASS INSERT |
| 58707-2 | TOOL DIE SET ONLY 16-20 AWG |
| 59239-8 | TOOL HAND 10-12AWG 14-16AWG HD |
| 59275 | TOOL CERTI-CRIMP PLASTI-G 20-26 |
| 59287-2 | TOOL HAND HEAVY PIDG 10-12AWG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58644-2 | 制造商:TE Connectivity 功能描述:MTA .100 MASS INSERTION PGH - Bulk |
| 5864-5001-09 | 功能描述:RF 连接器 PCB R/A Jack Rcept 50 OHM RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 5864-5001-10 | 功能描述:RF 连接器 MCX RA JCK PCB .155LG RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 5864-5002-10 | 功能描述:RF 连接器 OSX RA PCB JACK MICRO MIN SMT RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 5864-5003-10 | 功能描述:RF 连接器 MCX RA JCK PCB .115LG RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
发布紧急采购，3分钟左右您将得到回复。