- 您现在的位置：买卖IC网 > PDF目录19194 > 58707-1 (TE Connectivity)TOOL CRIMP W/DIE SET 16-20AWG PDF资料下载
参数资料
| 型号： | 58707-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMP W/DIE SET 16-20AWG |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III，微型通用 MATE-N-LOK |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 矩形触点，16-20 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 233 (CN2011-ZH PDF) |
| 配用： | A34924-ND - CONN PIN 16-20AWG GOLD CRIMP A32447-ND - CONN SOCKET 16-20AWG GOLD CRIMP A28815-ND - CONN SOCKET 16-20AWG GOLD CRIMP A28814-ND - CONN SOCKET 16-20AWG TIN CRIMP A28807-ND - CONN PIN 16-20AWG GOLD CRIMP A28806-ND - CONN PIN 16-20AWG TIN CRIMP A25691-ND - CONN PIN 16-20AWG TIN CRIMP A25692-ND - CONN SOCKET 16-20AWG TIN CRIMP |
| 其它名称： | A30726 |
PRO- CRIMPER III Hand Crimping Tool Assembly 58707- 1
4. Replace the lockscrew.
5. Make a sample crimp and measure the crimp
height. If the dimension is acceptable, replace and
secure the lockscrew. If the dimension is
unacceptable, continue to adjust the ratchet, and
again measure a sample crimp.
8. MAINTENANCE
Ensure that the tool and dies are clean by wiping
them with a clean, soft cloth. Remove any debris with
a clean, soft brush. Do not use objects that could
damage the tool. When not in use, keep handles
closed to prevent objects from becoming lodged in
the crimping dies, and store in a clean, dry area.
9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
10. REPLACEMENT
Customer--replaceable parts are shown in Figure 1.
408- 4503
Available separately, PRO--CRIMPER III Hand
Crimping Tool Repair Kit 679221--1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
If the dies are damaged or worn excessively, they
must be replaced.
Order the repair kit and replaceable parts through
your Tyco Electronics representative, or call
1--800--526--5142, or send a facsimile of your
purchase order to 1--717--986--7605, or write to:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG PA 17105--3608
11. REVISION SUMMARY
Revisions to this instruction sheet include:
S Changing the PRO--CRIMPER II Hand Tool to
the PRO--CRIMPER III Hand Tool;
S Applying the TE logo; and
S Revising the crimp--height comparator
information.
Rev A
Tyco Electronics Corporation
5 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| 210-7LPSTD | SWITCH SPST 7 SEC STRAIGHT TERM |
| 210-7MSTF | SWITCH RAISED ACTUATOR 7 SEC |
| 210-7LPSTF | SWITCH SPST 7 SEC LOW PROFILE |
| 210-7MST | SWITCH RAISED ACTUATOR 7 SEC |
| 210-7LPST | SWITCH SPST 7 SEC TAPE SEAL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 587071N001 | 制造商:TE Connectivity 功能描述:102A951-3/42-8-CS5182 - Bulk |
| 58707-2 | 功能描述:冲压机与冲模 PROCRIMP MINI-U-MNL2 DIE RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 5870R-0001A | 制造商:LG Corporation 功能描述:OPENER |
| 5870R-0002A | 制造商:LG Corporation 功能描述:OPENER |
| 5870R-0003A | 制造商:LG Corporation 功能描述:OPENER |
发布紧急采购，3分钟左右您将得到回复。