- 您现在的位置：买卖IC网 > Datasheet目录601 > 59824-1 (TE Connectivity)TETRA-CRIMP HT ASSY Datasheet资料下载
参数资料
| 型号： | 59824-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/6页 |
| 文件大小： | 0K |
| 描述： | TETRA-CRIMP HT ASSY |
| 特色产品： | SOLISTRAND?, Budget, and DIAMOND GRIP? Terminals and Splices |
| 标准包装： | 1 |
| 系列： | Tetra-Crimp, PIDG™, Plasti-Grip™ |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 接片和端子，10-22 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 375 (CN2011-ZH PDF) |
| 配用： | 8-324918-2-ND - CONN RING 10-12AWG #10 YELLOW 8-36158-1-ND - CONN RING 14-16AWG #6 BLUE 8-36149-1-ND - CONN RING 16-22AWG #6 RED 696430-6-ND - CONN RING 14-16AWG #10 BLUE 696423-7-ND - CONN RING 14-16AWG #1/4 BLUE 8-696371-1-ND - CONN RECEPT 10-12AWG 0.250 YLW 696302-1-ND - CONN RECEPT 14-16AWG 0.250 BLUE 696108-1-ND - CONN RECEPT 14-16AWG 0.187 BLUE 329391-ND - CONN RING 14-16AWG #10 YLW/BLK 327174-ND - CONN RING 16-22AWG #1 RED 更多... |
| 其它名称： | 59824-1-ND A27992 |
TETRA-CRIMP*
Hand Crimping Tool 59824-1
Instruction Sheet
408-2823
23 AUG 12 Rev Y
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use
and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
2. DESCRIPTION
and tensile performance of the crimp. Do NOT
re-adjust the ratchet.
Crimping
Chamber Label
Crimping Chamber
(3 Places)
Back Side of Tool
Locator
Assembly
Ratchet
Handle
Crimping
Dies
Ratchet
Pawl
Each hand tool features two crimping dies, a spring-
loaded locator assembly, and a ratchet handle with a
ratchet pawl. See Figure 1.When closed, the dies form
three crimping chambers each labeled by color on the
BACK side of the tool. The color indicates the wire
size and must match the insulation color of the
terminal or splice: yellow (12-10), blue (16-14), red
(22-16), black heavy duty (16-14 HD), and green
(20-16 HD).
The locator assembly positions the terminal or splice
between the crimping dies. The ratchet handle
assures full crimping. Once engaged, the ratchet will
not release until the tool handles have been FULLY
closed, unless the ratchet pawl is depressed to
manually release the ratchet. This feature, when
depressed, prevents crimping of an improperly
positioned terminal or splice.
CAUTION The crimping dies bottom before the ratchet
releases. This feature assures maximum electrical
!
3. CRIMPING PROCEDURE
Select the appropriate wire size and terminal or splice
for the hand tool. The wire size and insulation
diameter must be within the specified range for the
terminal or splice. Strip the wire to the dimension
provided in Figure 2. Do NOT nick or cut the wire
strands. Then, proceed as follows:
1. Open the crimping dies by squeezing the tool
Figure 1
1. INTRODUCTION
TETRA-CRIMP Hand Crimping Tool 59824-1 (shown
in Figure 1) is designed to crimp the terminals and
splices listed in Figure 2 onto stranded wire sizes 22
through 10 AWG. Refer to Catalog 82042 for product
part numbers. Read these instructions thoroughly
before using the hand tool.
handles together until the ratchet releases.
2. Push the locator assembly away from the upper
crimping die slightly and hold.
a. If crimping a terminal, position the wire
barrel in the appropriate crimping chamber
between the locator assembly and the upper
die. Make sure that the flat side of the terminal
faces up. See Figure 3, Detail A.
NOTE
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures and
illustrations are for reference only and are not
drawn to scale.
b. If crimping a splice, position the wire barrel
in the appropriate crimping chamber. Seat the
splice window indent on the locator assembly.
Refer to Figure 3, Detail B.
Reasons for reissue are provided in Section 8,
REVISION SUMMARY.
3. Holding the wire barrel in place, release the
locator assembly.
4. Hold the tool so that the BACK side is facing you,
and insert the stripped wire into wire barrel until the
wire bottoms. Refer to Figure 3.
?2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 6
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 59827-1 | TOOL TETRA-CRIMP DIE 16-14AWG |
| 59828-1 | TOOL TETRA-CRIMP DIE 12-10AWG |
| 6-1579001-6 | TOOL DIE SET FOR SOLARLOK |
| 600003 | WR-WTB TOOL CRIMP WTB SERIES |
| 600619228180 | WR-WTB DIE SET FOR 600003 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 59824-1 CAL | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1 CAL D | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED W/DATA - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1 CAL DU | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED W/ DATA & UNCERTAINTIES - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1-N | 制造商:TE CONNECTIVITY 功能描述: |
| 598-2425-02 | 制造商:Concord Electronics Inc 功能描述: 制造商:Concord Electronics Inc 功能描述:CONNECTOR |
发布紧急采购，3分钟左右您将得到回复。