- 您现在的位置：买卖IC网 > Datasheet目录601 > 59824-1 (TE Connectivity)TETRA-CRIMP HT ASSY Datasheet资料下载
参数资料
| 型号： | 59824-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/6页 |
| 文件大小： | 0K |
| 描述： | TETRA-CRIMP HT ASSY |
| 特色产品： | SOLISTRAND?, Budget, and DIAMOND GRIP? Terminals and Splices |
| 标准包装： | 1 |
| 系列： | Tetra-Crimp, PIDG™, Plasti-Grip™ |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 接片和端子，10-22 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 375 (CN2011-ZH PDF) |
| 配用： | 8-324918-2-ND - CONN RING 10-12AWG #10 YELLOW 8-36158-1-ND - CONN RING 14-16AWG #6 BLUE 8-36149-1-ND - CONN RING 16-22AWG #6 RED 696430-6-ND - CONN RING 14-16AWG #10 BLUE 696423-7-ND - CONN RING 14-16AWG #1/4 BLUE 8-696371-1-ND - CONN RECEPT 10-12AWG 0.250 YLW 696302-1-ND - CONN RECEPT 14-16AWG 0.250 BLUE 696108-1-ND - CONN RECEPT 14-16AWG 0.187 BLUE 329391-ND - CONN RING 14-16AWG #10 YLW/BLK 327174-ND - CONN RING 16-22AWG #1 RED 更多... |
| 其它名称： | 59824-1-ND A27992 |
408-2823
Figure 2
discarded, and replaced with new ones.
5. Holding the wire in place, squeeze the tool
handles together until the ratchet releases. Allow
the tool handles to open FULLY.
6. Remove crimped terminal or splice from the tool.
7. If crimping a splice, position the uncrimped wire
barrel in the crimping chamber. Make sure to seat
the splice window indent on the locator assembly.
Repeat Steps 3 through 6.
CAUTION Damaged or worn terminals must not be used.
Terminals may be removed from the wire,
!
Rev Y
4. CRIMP INSPECTION
— Check that the crimp dot code on the color-coded
insulation indicates the crimping chamber used. Refer
to Figure 2.
— Check that the crimp is centered on the wire
barrel. See Figure 4.
— Make sure that the wire insulation does not enter
the wire barrel. See Figure 4.
— Check that the wire end is flush with or slightly
beyond the end of the wire barrel. See Figure 4.
2 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| 59827-1 | TOOL TETRA-CRIMP DIE 16-14AWG |
| 59828-1 | TOOL TETRA-CRIMP DIE 12-10AWG |
| 6-1579001-6 | TOOL DIE SET FOR SOLARLOK |
| 600003 | WR-WTB TOOL CRIMP WTB SERIES |
| 600619228180 | WR-WTB DIE SET FOR 600003 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 59824-1 CAL | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1 CAL D | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED W/DATA - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1 CAL DU | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED W/ DATA & UNCERTAINTIES - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1-N | 制造商:TE CONNECTIVITY 功能描述: |
| 598-2425-02 | 制造商:Concord Electronics Inc 功能描述: 制造商:Concord Electronics Inc 功能描述:CONNECTOR |
发布紧急采购，3分钟左右您将得到回复。