- 您现在的位置：买卖IC网 > Datasheet目录601 > 59824-1 (TE Connectivity)TETRA-CRIMP HT ASSY Datasheet资料下载
参数资料
| 型号： | 59824-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | TETRA-CRIMP HT ASSY |
| 特色产品： | SOLISTRAND?, Budget, and DIAMOND GRIP? Terminals and Splices |
| 标准包装： | 1 |
| 系列： | Tetra-Crimp, PIDG™, Plasti-Grip™ |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 接片和端子，10-22 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 375 (CN2011-ZH PDF) |
| 配用： | 8-324918-2-ND - CONN RING 10-12AWG #10 YELLOW 8-36158-1-ND - CONN RING 14-16AWG #6 BLUE 8-36149-1-ND - CONN RING 16-22AWG #6 RED 696430-6-ND - CONN RING 14-16AWG #10 BLUE 696423-7-ND - CONN RING 14-16AWG #1/4 BLUE 8-696371-1-ND - CONN RECEPT 10-12AWG 0.250 YLW 696302-1-ND - CONN RECEPT 14-16AWG 0.250 BLUE 696108-1-ND - CONN RECEPT 14-16AWG 0.187 BLUE 329391-ND - CONN RING 14-16AWG #10 YLW/BLK 327174-ND - CONN RING 16-22AWG #1 RED 更多... |
| 其它名称： | 59824-1-ND A27992 |
408-2823
4. When the tool is not in use, keep handles closed
to prevent objects from becoming lodged in the
crimping dies. Store the tool in a clean, dry area.
5.2. Periodic Inspection
A. Lubrication
Lubricate all pins, pivot points, and bearing surfaces
with SAE 20 motor oil as follows:
— Tool used in daily production-lubricate daily
— Tool used daily (occasional)-lubricate weekly
— Tool used weekly-lubricate monthly
Wipe excess oil from tool, particularly from crimping
area. Oil transferred from the crimping area onto
certain terminations may affect the electrical
characteristics of an application.
B. Visual Inspection
1. Close tool handles until ratchet releases and then
allow them to open freely. If they do not open
quickly and fully, the spring is defective and must be
replaced. See Section 6, REPLACEMENT AND
Suggested Plug Gage Design
for Wire Crimping Chamber
Inspection of Wire Crimping Chamber
REPAIR.
2. Inspect crimping area for worn, cracked, or
broken dies. If damage is evident, return the tool for
evaluation and repair. See Section 6,
REPLACEMENT AND REPAIR.
C. Ratchet Inspection
The ratchet feature on these hand tools should be
checked to ensure that the ratchet does not release
GO element must pass
completely through the wire
crimping chamber only.
NO-GO element may enter
partially, but must not pass
completely through the wire
crimping chamber.
prematurely, allowing the dies to open before they
have fully bottomed.
1. Squeeze the tool handles together, and count the
number of ratchet stops. Five stops, including the
CRIMPING
CHAMBER
COLOR
CODE
GAGE ELEMENT DIAMETER
GO NO-GO
“W”
(Width)
Max
release position, should be indicated by the
movement of the ratchet pawl and the clicking
sound associated with its movement. Refer to
Figure 1.
Red
Blue/Green
1.981-1.988
[.0780-.0783]
2.336-2.344
[.0920-.0923]
2.181-2.184
[.0859-.0860]
2.537-2.540
[.0999-.1000]
4.69 [.185]
5.33 [.210]
2. If fewer positions are indicated, the ratchet pawl
and ratchet handle must be replaced. Refer to
Section 6, REPLACEMENT AND REPAIR.
3. If dies do not bottom after 5 ratchet stops, return
Yellow/Black
3.251-3.258 3.451-3.454
[.1280-.1283] [.1359-.1360]
Figure 5
6.85 [.270]
tool for repair. Refer to Section 6, REPLACEMENT
AND REPAIR.
When the tool passes the ratchet inspection, lubricate
it with a THIN coat of any good SAE 20 motor oil.
D. Gaging the Crimping Chamber (Figure 5)
1. Remove traces of oil or dirt from the crimping
chamber and plug gage.
2. In order to properly gage this tool, a terminal must
be crimped in the crimping chamber being
inspected. In place of a terminal, a soft material
such as brass or solder may be used to seat the
tooling.
Rev Y
3. Close the tool handles until the crimping dies
have bottomed; then hold in this position. DO NOT
force the dies beyond initial contact.
4. Hold locator assembly away from crimping dies.
Carefully insert GO element into the corresponding
crimping chamber; do not force it. The GO element
must pass completely through the crimping
chamber.
5. In the same manner, try to insert the NO-GO
element into the same crimping chamber. The NO-
GO element may start entry, but must not pass
completely through the crimping chamber. See
Figure 5.
4 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| 59827-1 | TOOL TETRA-CRIMP DIE 16-14AWG |
| 59828-1 | TOOL TETRA-CRIMP DIE 12-10AWG |
| 6-1579001-6 | TOOL DIE SET FOR SOLARLOK |
| 600003 | WR-WTB TOOL CRIMP WTB SERIES |
| 600619228180 | WR-WTB DIE SET FOR 600003 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 59824-1 CAL | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1 CAL D | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED W/DATA - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1 CAL DU | 制造商:TE Connectivity / AMP 功能描述:CALIBRATED W/ DATA & UNCERTAINTIES - Crimp Tool; Crimp Size:22AWG to 10AWG; Features:Crimp dies travel in arc-like pa |
| 59824-1-N | 制造商:TE CONNECTIVITY 功能描述: |
| 598-2425-02 | 制造商:Concord Electronics Inc 功能描述: 制造商:Concord Electronics Inc 功能描述:CONNECTOR |
发布紧急采购，3分钟左右您将得到回复。