- 您现在的位置：买卖IC网 > PDF目录68810 > 71M6511H-IGT (MAXIM INTEGRATED PRODUCTS INC) 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64 PDF资料下载
参数资料
| 型号： | 71M6511H-IGT |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64 |
| 封装： | LQFP-64 |
| 文件页数： | 49/98页 |
| 文件大小： | 1278K |
| 代理商： | 71M6511H-IGT |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页当前第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页
71M6511/71M6511H
Single-Phase Energy Meter IC
DATA SHEET
NOVEMBER 2010
Page: 53 of 98
2005–2010 Teridian Semiconductor Corporation
V2.7
A Maxim Integrated Products Brand
Temperature Compensation
Internal Compensation: The internal voltage reference is calibrated during device manufacture. Trim data is stored in on-chip
fuses.
For the 71M6511, the temperature coefficients TC1 and TC2 are given as constants that represent typical component
behavior.
For the 71M6511H, the temperature characteristics of the chip are measured during production and then stored in the fuse
registers TRIMBGA, TRIMBGB and TRIMM[2:0]. TC1 and TC2 can be derived from the fuses by using the relations given in the
Electrical Specifications section. TC1 and TC2 can be further processed to generate the coefficients PPMC and PPMC2.
TRIMM[2:0], TRIMBGA and TRIMBGB are read by first writing either 4, 5 or 6 to TRIMSEL (0x20FD) and then reading the value
of TRIM (0x20FF).
When the EXT_TEMP register in CE DRAM (address 0x38) is set to 0, the CE automatically compensates for temperature
errors by controlling the GAIN_ADJ register (address 0x2E) based on the PPMC, PPMC2, and TEMP_X register values. In the
case of internal compensation, GAIN_ADJ is an output of the CE.
External Compensation: Rather than internally compensating for the temperature variation, the bandgap temperature is
provided to the embedded MPU, which then may digitally compensate the power outputs. This permits a system-wide
temperature correction over the entire system rather than local to the chip. The incorporated thermal coefficients may include
the current sensors, the voltage sensors, and other influences. Since the band gap is chopper stabilized via the CHOP_EN bits,
the most significant long-term drift mechanism in the voltage reference is removed.
When the EXT_TEMP register in CE DRAM is set to 15, the CE ignores the PPMC, PPMC2, and TEMP_X register values and
applies the gain supplied by the MPU in GAIN_ADJ. External compensation enables the MPU to control the CE gain based on
any variable, and when EXT_TEMP = 15, GAIN_ADJ is an input to the CE.
Chopping Circuitry
As explained in the hardware section, the bits of the I/O RAM register CHOP_ENA[1:0] have to be toggled in between
multiplexer cycles to achieve the desired elimination of DC offset.
The amplifier within the reference is auto-zeroed by means of an internal signal that is controlled by the CHOP_EN bits. When
this signal is HIGH, the connection of the amplifier inputs is reversed. This preserves the overall polarity of the amplifier gain
but inverts the input offset. By alternately reversing the connection, the offset of the amplifier is averaged to zero. The two bits
of the CHOP_EN register have the function specified in Table 61.
CHOP_EN[1]
CHOP_EN[0]
Function
0
Toggle chop signal
0
1
Reference connection positive
1
0
Reference connection reversed
1
Toggle chop signal
Table 61: CHOP_EN Bits
For automatic chopping, the CHOP_EN bits are set to either 00 or 11. In this mode, the polarity of the signals feeding the
reference amplifier will be automatically toggled for each multiplexer cycle as shown in Figure 21. With an even number of
multiplexer cycles in each accumulation interval, the number of cycles with positive reference connection will equal the number
of cycles with reversed connection, and the offset for each sampled signal will be averaged to zero. This sequence is
acceptable when only the primary signals (meter voltage, meter current) are of interest.
相关PDF资料 |
PDF描述 |
|---|---|
| 71M6511H-IGTR | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64 |
| 71M6521DE-IGTR/F | SPECIALTY ANALOG CIRCUIT, QFP64 |
| 71M6521DE-IM/F | SPECIALTY ANALOG CIRCUIT, QCC68 |
| 71M6521FE-IMR/F | SPECIALTY ANALOG CIRCUIT, QCC68 |
| 71M6521DE-IGT/F | SPECIALTY ANALOG CIRCUIT, QFP64 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 71M6511H-IGT/F | 功能描述:计量片上系统 - SoC Highly Integrated SoC w/MCU Core RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
| 71M6511H-IGTR | 制造商:Maxim Integrated Products 功能描述:RESID. HI PRECISION METR (1P, .1%) - Tape and Reel |
| 71M6511H-IGTR/F | 功能描述:计量片上系统 - SoC Highly Integrated SoC w/MCU Core RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
| 71M6511-IGT | 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Single-Phase Energy Meter IC |
| 71M6511-IGT/F | 功能描述:计量片上系统 - SoC Highly Integrated SoC w/MCU Core RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。