参数资料
型号: 71M6513H-DB
厂商: Maxim Integrated Products
文件页数: 64/112页
文件大小: 0K
描述: BOARD DEMO 71M6513H ENERGY METER
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
主要目的: 电源管理,电度表/功率表
嵌入式:
已用 IC / 零件: 71M6513H
已供物品: 2 个板,线缆,CD,电源
71M6513/71M6513H Demo Board User’s Manual
To disable the LCD voltage boost circuit, we apply the following CLI commands:
>RI20$
>8E
>RI20=E
>RI20=8E
Reads the hex value of register 0x2020
Response from Demo Code indicating the bit 7 is set
Writes the hex value 0x0E to register 0x2020 causing the LCD boost to be switched off
Enables the LCD boost circuit
The LCD_CLK register determines the frequency at which the COM pins change states. A slower clock means
lower power consumption, but if the clock is too slow, visible flicker can occur. The default clock frequency for
the 71M6513/6513H Demo Boards is 150Hz ( LCD_CLK = 01).
Register Name
LCD_CLK[1:0]
Address [bits]
2021[1:0]
R/W
R/W
Description
Sets the LCD clock frequency, i.e. the frequency at which SEG
and COM pins change states.
00: f w /2 , 01: f w /2 , 10: f w /2 , 11: f w /2
f w = CKADC/128 = 38,400
9 8 7 6
To change the LCD clock frequency, we apply the following CLI commands:
>RI21$
>25
>RI21=24
>RI21=25
Reads the hex value of register 0x2021
Response from Demo Code indicating the bit 0 is set and bit 1 is cleared.
Writes the hex value 0x24 to register 0x2021 clearing bit 0 – LCD flicker is visible now
Writes the original value back to LCD_CLK
2.6 TERIDIAN APPLICATION NOTES
Please contact your local TERIDIAN sales representative for TERIDIAN Application Notes. Available application notes
are listed below.
Number
AN_651X_007
AN_651X_008
AN_651X_009
AN_651X_013
AN_651X_016
AN_651X_017
AN_651X_018
AN_651X_019
AN_651X_020
AN_651X_022
AN_6513_021
Title
Rogowski Coil
Optical Port
Temperature Compensation
Emulator Upgrade
EMC/EMI Guidelines
LCD
Chop Enable
RX Pin
Calibration for Shunt and CT
Calibration Procedures
Neutral Current
Page: 64 of 112
? 2005-2006 TERIDIAN Semiconductor Corporation
Revision 5.6
相关PDF资料
PDF描述
71M6515H-DB BOARD DEMO 71M6515H ENERGY METER
71M6521FE-DB BOARD DEMO FOR 71M6521FE
71M6531F-DB BOARD DEMO 71M6531F
71M6533-DB BOARD DEMO 71M6533
71M6534H-DB BOARD DEMO 71M6534H
相关代理商/技术参数
参数描述
71M6513H-IEL 制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6513
71M6513H-IEL/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IELR 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IELR/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IGT/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel