参数资料
型号: 71M6513H-DB
厂商: Maxim Integrated Products
文件页数: 66/112页
文件大小: 0K
描述: BOARD DEMO 71M6513H ENERGY METER
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
主要目的: 电源管理,电度表/功率表
嵌入式:
已用 IC / 零件: 71M6513H
已供物品: 2 个板,线缆,CD,电源
71M6513/71M6513H Demo Board User’s Manual
Item #
9
Reference
Designator
SW2
Name
RESET
Use
Chip reset switch: The RESETZ pin has an internal pull up
that allows normal chip operation. When the switch is
pressed, the RESETZ pin is pulled low which resets the IC
into a known state.
10
SW1
Pulse Rate Select
Switch connected to DIO3 (non-functional in Demo Code).
SW1 should always be kept in the lower position.
11
JP9
EEPROM Write
Protect
Three-pin header that allows selection of the write
protection or read/write capability for the EEPROM (U4) on
the demo board. Default setting of the demo board is to
place a jumper between pin 1 and 2 of JP9 .
12
J12
Supply and
Optical Test Point
Four-pin header. Terminals 1 and 3 can be used to
measure the supply voltage to the 71M6513/71M6513H IC.
Terminal 2 monitors the TX_OPT output of the IC. Terminal
4 monitors the OPT_RX input to the IC.
13
14
15
JP12
J2
J10, J11
DIO Test Point
DEBUG
LCD
7-pin test point. For monitoring DIO15 to DIO21.
Connector for Debug Board. 2x8 pin male header.
LCD connection. The LCD daughter board connects
between these two 2x12 header jumpers.
16
BT1
Battery Terminal
Two-pin header for connection of a 3.6V battery. The top
pin is the positive terminal and the bottom pin is ground.
17
JP8
VBAT Selection
Three-pin header that allows selection of power to the
VBAT pin. When the jumper is placed between pins 1 and
2 (default setting of demo board) VBAT is tied to the IC
supply. When placed between terminals 2 and 3, VBAT is
powered by an external battery.
18, 19
20
21
22
TP17, TP18
J14
J13
TP7
Test Points
EMULATOR I/F
Voltage
Connections
VREFOUT
TMUXOUT and CKTEST test point.
2x10 emulator connector port for Signum ICE ADM-51.
Five-pin header. Connect jumper to the bottom two pins
as the default .
Two-pin header. The top terminal is VREF, the bottom
terminal is ground
23
TP10, TP9, TP8
V1, V2, V3 Test
Points
Two-pin headers that are the comparator voltage input test
points . A jumper is required at TP10 from V3P3 to V1
for operation with emulator .
Table 3-2: D6513T3B2 Demo Board Description
Page: 66 of 112
? 2005-2006 TERIDIAN Semiconductor Corporation
Revision 5.6
相关PDF资料
PDF描述
71M6515H-DB BOARD DEMO 71M6515H ENERGY METER
71M6521FE-DB BOARD DEMO FOR 71M6521FE
71M6531F-DB BOARD DEMO 71M6531F
71M6533-DB BOARD DEMO 71M6533
71M6534H-DB BOARD DEMO 71M6534H
相关代理商/技术参数
参数描述
71M6513H-IEL 制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6513
71M6513H-IEL/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IELR 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IELR/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IGT/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel